/***************************************************************************** * dload.h * * This file implements the streaming download protocol * * Copyright (c) 2007-2011 * Qualcomm Technologies Incorporated. * All Rights Reserved. * Qualcomm Confidential and Proprietary * *****************************************************************************/ /*============================================================================= Edit History $Header: //source/qcom/qct/platform/uefi/workspaces/pweber/apps/8x26_emmcdl/emmcdl/main/latest/inc/dload.h#2 $ $DateTime: 2014/08/05 11:44:01 $ $Author: pweber $ when who what, where, why ------------------------------------------------------------------------------- 11/08/11 pgw Initial version. =============================================================================*/ #pragma once #include "serialport.h" #include "partition.h" #include #include "sysdeps.h" #define PACKET_TIMEOUT 1000 #define FEATURE_SECTOR_ADDRESSES 0x00000010 // Packets that are used in dload mode #define CMD_WRITE 0x01 /* Write a block of data to memory (received) */ #define CMD_ACK 0x02 /* Acknowledge receiving a packet (transmitted) */ #define CMD_NAK 0x03 /* Acknowledge a bad packet (transmitted) */ #define CMD_ERASE 0x04 /* Erase a block of memory (received) */ #define CMD_GO 0x05 /* Begin execution at an address (received) */ #define CMD_NOP 0x06 /* No operation, for debug (received) */ #define CMD_PREQ 0x07 /* Request implementation info (received) */ #define CMD_PARAMS 0x08 /* Provide implementation info (transmitted) */ #define CMD_DUMP 0x09 /* Debug: dump a block of memory (received) */ #define CMD_RESET 0x0A /* Reset the phone (received) */ #define CMD_UNLOCK 0x0B /* Unlock access to secured ops (received) */ #define CMD_VERREQ 0x0C /* Request software version info (received) */ #define CMD_VERRSP 0x0D /* Provide software version info (transmitted) */ #define CMD_PWROFF 0x0E /* Turn phone power off (received) */ #define CMD_WRITE_32BIT 0x0F /* Write a block of data to 32-bit memory */ #define CMD_MEM_DEBUG_QUERY 0x10 /* Memory debug query (received) */ #define CMD_MEM_DEBUG_INFO 0x11 /* Memory debug info (transmitted) */ #define CMD_MEM_READ_REQ 0x12 /* Memory read request (received) */ #define CMD_MEM_READ_RESP 0x13 /* Memory read response (transmitted) */ #define CMD_MEM_UNFRAMED_READ_REQ 0x14 /* Memory unframed read request (received) */ #define CMD_MEM_UNFRAMED_READ_RESP 0x15 /* Memory unframed read response (transmitted) */ #define CMD_SERIAL_NUM_READ 0x16 /* Return Serial number from efuse read */ #define CMD_MSM_HW_ID_READ 0x17 /* Return msm_hw_id from efuse read */ #define CMD_OEM_HASH_KEY_READ 0x18 /* Return oem_pk_hash from efuse read */ #define CMD_QPST_COOKIE_READ_REQ 0x19 /* QPST cookie read request (received) */ #define CMD_QPST_COOKIE_READ_RESP 0x1A /* QPST cookie read response (transmitted) */ #define CMD_DLOAD_SWITCH 0x3A // Partition types #define PRTN_PBL 1 // don't change value #define PRTN_QCSBLDHDR 2 // don't change value #define PRTN_QCSBL 3 // don't change value #define PRTN_OEMSBL 4 // don't change value #define PRTN_MODEM 5 // don't change value #define PRTN_APPS 6 // don't change value #define PRTN_OTPBL 7 // don't change value #define PRTN_FOTAUI 8 // don't change value #define PRTN_CEFS 9 // Write CEFS to the modem f/s #define PRTN_APPSBL 10 // don't change value #define PRTN_CEFSAPPS 11 // Write CEFS to the apps f/s #define PRTN_WINMOBILE 12 // Microsoft WinMobile image #define PRTN_QDSP6 13 // QDSP6 executable #define PRTN_USER 14 // User defined partition data #define PRTN_DBL 15 // SB 2.0 Device boot loader #define PRTN_OSBL 16 // SB 2.0 OS boot loader #define PRTN_FSBL 17 // SB 2.0 Failsafe boot loader #define PRTN_QDSP6_2 18 // dsp2.mbn #define PRTN_RAWAPPSEFS 19 // Raw (includes ECC + spare data) #define PRTN_ROFS1 20 // 0x14 - Symbian #define PRTN_ROFS2 21 // 0x15 - Symbian #define PRTN_ROFS3 22 // 0x16 - Symbian #define PRTN_MBR 32 // mbr.bin for NOR (boot) + MoviNand (AMSS+APPS) #define PRTN_EMMCUSER 33 // For programming eMMC chip (singleimage.mbn) #define PRTN_EMMCBOOT0 34 // BOOT and GPP partitions #define PRTN_EMMCBOOT1 35 #define PRTN_EMMCRPMB 36 #define PRTN_EMMCGPP1 37 #define PRTN_EMMCGPP2 38 #define PRTN_EMMCGPP3 39 #define PRTN_EMMCGPP4 40 // Packets that are used in emergency download mode #define EHOST_HELLO_REQ 0x01 // Hello request #define EHOST_HELLO_RSP 0x02 // Hello response #define EHOST_SIMPLE_READ_REQ 0x03 // Read some number of bytes from phone memory #define EHOST_SIMPLE_READ_RSP 0x04 // Response to simple read #define EHOST_SIMPLE_WRITE_REQ 0x05 // Write data without erase #define EHOST_SIMPLE_WRITE_RSP 0x06 // Response to simple write #define EHOST_STREAM_WRITE_REQ 0x07 // Streaming write command #define EHOST_STREAM_WRITE_RSP 0x08 // Response to stream write #define EHOST_NOP_REQ 0x09 // NOP request #define EHOST_NOP_RSP 0x0A // NOP response #define EHOST_RESET_REQ 0x0B // Reset target #define EHSOT_RESET_ACK 0x0C // Response to reset #define EHOST_ERROR 0x0D // Target Error #define EHOST_LOG 0x0E // Target informational message #define EHOST_UNLOCK_REQ 0x0F // Unlock Target #define EHOST_UNLOCK_RSP 0x10 // Target unlocked #define EHOST_POWER_OFF_REQ 0x11 // Power off target #define EHOST_POWER_OFF_RSP 0x12 // Power off target response #define EHOST_OPEN_REQ 0x13 // Open for writing image #define EHOST_OPEN_RSP 0x14 // Response to open for writing image #define EHOST_CLOSE_REQ 0x15 // Close and flush last partial write to Flash #define EHOST_CLOSE_RSP 0x16 // Response to close and flush last partial write to Flash #define EHOST_SECURITY_REQ 0x17 // Send Security mode to use for programming images #define EHOST_SECURITY_RSP 0x18 // Response to Send Security mode #define EHOST_PARTITION_REQ 0x19 // Send partition table to use for programming images #define EHOST_PARTITION_RSP 0x1A // Response to send partition table #define EHOST_OPEN_MULTI_REQ 0x1B // Open for writing image (Multi-image mode only) #define EHOST_OPEN_MULTI_RSP 0x1C // Response to open for writing image #define EHOST_ERASE_FLASH_REQ 0x1D // Erase entire Flash device #define EHOST_ERASE_FLASH_RSP 0x1E // Response to erase Flash #define EHOST_GET_ECC_REQ 0x1F // Read current ECC generation status #define EHOST_GET_ECC_RSP 0x20 // Response to Get ECC state with current status #define EHOST_SET_ECC_REQ 0x21 // Enable/disable hardware ECC generation #define EHOST_SET_ECC_RSP 0x22 // Response to set ECC #define EHOST_STREAM_DLOAD_REQ 0x23 // New streaming download request #define EHOST_STREAM_DLOAD_RSP 0x24 // New streaming download response #define EHOST_UNFRAMED_REQ 0x30 // Unframed streaming write command #define EHOST_UNFRAMED_RSP 0x31 // Unframed streaming write response class Dload { public: Dload(SerialPort *port); int ConnectToFlashProg(unsigned char ver); //ver=2 for byte addressing and ver=3 for sector addressing int DeviceReset(void); int LoadPartition(char *filename); int LoadImage(char *szSingleImage); int CreateGPP(uint32_t dwGPP1, uint32_t dwGPP2, uint32_t dwGPP3, uint32_t dwGPP4); int SetActivePartition(); int OpenPartition(int partition); int ClosePartition(); int FastCopySerial(int hInFile, uint32_t sector, uint32_t sectors); int LoadFlashProg(char *szFlashPrg); int WriteRawProgramFile(char *szXMLFile); int GetDloadParams(unsigned char *rsp, int len); int IsDeviceInDload(void); int WipeDiskContents(__uint64_t start_sector, __uint64_t num_sectors); private: void HexToByte(const char *hex, unsigned char *bin, int len); uint32_t HexRunAddress(char *filename); uint32_t HexDataLength(char *filename); __uint64_t GetNumDiskSectors(); int ProgramPartitionEntry(PartitionEntry pe); SerialPort *sport; bool bSectorAddress; };