/* * * (C) Copyright 2011~2015 Bosch Sensortec GmbH All Rights Reserved * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * *------------------------------------------------------------------------------ * Disclaimer * * Common: Bosch Sensortec products are developed for the consumer goods * industry. They may only be used within the parameters of the respective valid * product data sheet. Bosch Sensortec products are provided with the express * understanding that there is no warranty of fitness for a particular purpose. * They are not fit for use in life-sustaining, safety or security sensitive * systems or any system or device that may lead to bodily harm or property * damage if the system or device malfunctions. In addition, Bosch Sensortec * products are not fit for use in products which interact with motor vehicle * systems. The resale and/or use of products are at the purchaser's own risk * and his own responsibility. The examination of fitness for the intended use * is the sole responsibility of the Purchaser. * * The purchaser shall indemnify Bosch Sensortec from all third party claims, * including any claims for incidental, or consequential damages, arising from * any product use not covered by the parameters of the respective valid product * data sheet or not approved by Bosch Sensortec and reimburse Bosch Sensortec * for all costs in connection with such claims. * * The purchaser must monitor the market for the purchased products, * particularly with regard to product safety and inform Bosch Sensortec without * delay of all security relevant incidents. * * Engineering Samples are marked with an asterisk (*) or (e). Samples may vary * from the valid technical specifications of the product series. They are * therefore not intended or fit for resale to third parties or for use in end * products. Their sole purpose is internal client testing. The testing of an * engineering sample may in no way replace the testing of a product series. * Bosch Sensortec assumes no liability for the use of engineering samples. By * accepting the engineering samples, the Purchaser agrees to indemnify Bosch * Sensortec from all claims arising from the use of engineering samples. * * Special: This software module (hereinafter called "Software") and any * information on application-sheets (hereinafter called "Information") is * provided free of charge for the sole purpose to support your application * work. The Software and Information is subject to the following terms and * conditions: * * The Software is specifically designed for the exclusive use for Bosch * Sensortec products by personnel who have special experience and training. Do * not use this Software if you do not have the proper experience or training. * * This Software package is provided `` as is `` and without any expressed or * implied warranties, including without limitation, the implied warranties of * merchantability and fitness for a particular purpose. * * Bosch Sensortec and their representatives and agents deny any liability for * the functional impairment of this Software in terms of fitness, performance * and safety. Bosch Sensortec and their representatives and agents shall not be * liable for any direct or indirect damages or injury, except as otherwise * stipulated in mandatory applicable law. * * The Information provided is believed to be accurate and reliable. Bosch * Sensortec assumes no responsibility for the consequences of use of such * Information nor for any infringement of patents or other rights of third * parties which may result from its use. */ /*! @addtogroup bsx * @{ */ #ifndef BSX_PROPERTY_SET_IDENTIFIER_H_ #define BSX_PROPERTY_SET_IDENTIFIER_H_ /*! @brief Provides the enumeration containing property set identifier * * @{ */ #define BSX_PROPERTY_SET_ID_FULL (0) #define BSX_PROPERTY_SET_ID_MINIMAL (1) #define BSX_PROPERTY_SET_ID_TYPICAL (2) /** @brief phone related values, e.g. SIC matrix, conversion factors for sensor resolution and range */ #define BSX_PROPERTY_SET_ID_CONDITIONING (10) #define BSX_PROPERTY_SET_ID_PREPROCESSING (20) #define BSX_PROPERTY_SET_ID_CALIBRATOR_ALL (31) /** @brief State of accel calibrator */ #define BSX_PROPERTY_SET_ID_CALIBRATOR_ACCELEROMETER (32) /** @brief state of gyro calibrator */ #define BSX_PROPERTY_SET_ID_CALIBRATOR_GYROSCOPE (33) /** @brief state of magnetometer */ #define BSX_PROPERTY_SET_ID_CALIBRATOR_MAGNETOMETER (34) /** @brief magnetometer related values, e.g. noise and offsets, for sensors such as BMM*, YAS*, AK* */ #define BSX_PROPERTY_SET_ID_MAGNETOMETER (35) /** @brief magnetometer related values, e.g. noise and offsets, for sensors such as BMM*, YAS*, AK* */ #define BSX_PROPERTY_SET_ID_MAGNETOMETER_CALIBRATION (36) #define BSX_PROPERTY_SET_ID_MAGNETOMETER_SOFT_IRON_EQUALIZATION (37) #define BSX_PROPERTY_SET_ID_MAGNETOMETER_INTERFACE (38) #define BSX_PROPERTY_SET_ID_DIRECTIONTRACKER_ALL (41) #define BSX_PROPERTY_SET_ID_DIRECTIONTRACKER_COMPASS (42) #define BSX_PROPERTY_SET_ID_DIRECTIONTRACKER_M4G (43) #define BSX_PROPERTY_SET_ID_DIRECTIONTRACKER_IMU (44) #define BSX_PROPERTY_SET_ID_DIRECTIONTRACKER_NDOF (45) #define BSX_PROPERTY_SET_ID_PREDEFINED_FILTERS_ALL (51) #define BSX_PROPERTY_SET_ID_PREDEFINED_FILTERS_COMPASS_HEADING_SENSITIVITY (52) #define BSX_PROPERTY_SET_ID_PREDEFINED_FILTERS_NDOF_ORIENTATION_CORRECTION_SPEED (53) #define BSX_PROPERTY_SET_ID_PREDEFINED_FILTERS_MAG_CALIB_ACC_SENSITIVITY (54) #define BSX_PROPERTY_SET_ID_PREDEFINED_FILTERS_MAG_CALIB_SPEED (55) #define BSX_PROPERTY_SET_ID_PREDEFINED_FILTERS_COMPASS_MAG_CALIB_ACC_AUTO_REC_MODE (56) #define BSX_PROPERTY_SET_ID_TURNOFF (36) #define BSX_PROPERTY_SET_ID_MIXED (61) #define BSX_PROPERTYSET_FULL BSX_PROPERTY_SET_ID_FULL #define BSX_PROPERTYSET_CALIBRATOR_ACCELEROMETER BSX_PROPERTY_SET_ID_CALIBRATOR_ACCELEROMETER #define BSX_PROPERTYSET_CALIBRATOR_MAGNETOMETER BSX_PROPERTY_SET_ID_CALIBRATOR_MAGNETOMETER #define BSX_PROPERTYSET_CALIBRATOR_GYROSCOPE BSX_PROPERTY_SET_ID_CALIBRATOR_GYROSCOPE /*! * @} */ #endif /* BSX_PROPERTY_SET_IDENTIFIER_H_ */ /*! @} */