/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "msm8909-pm8916-qrd.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. MSM8909-PM8916 QRD SKUT";
	compatible = "qcom,msm8909-qrd", "qcom,msm8909", "qcom,qrd";
};

#include "dsi-panel-fl10802-fwvga-video.dtsi"

&tlmm_pinmux {
	akm_reset_pin {
		qcom,pins = <&gp 36>;
		qcom,pin-func = <0>;
		qcom,num-grp-pins = <1>;
		label = "akm_reset_pin";
		akm_default: akm_default {
			drive-strength = <6>;
			bias-pull-up;
		};
		akm_sleep: akm_sleep {
			drive-strength = <2>;
			bias-pull-down;
		};
	};

	ltr553_int_pin {
		qcom,pins = <&gp 94>;
		qcom,pin-func = <0>;
		qcom,num-grp-pins = <1>;
		label = "ltr553-irq";
		ltr553_default: ltr553_default {
			drive-strength = <6>;
			bias-pull-up;
		};
		ltr553_sleep: ltr553_sleep {
			drive-strength = <2>;
			bias-pull-down;
		};
	};

	bma2x2_int1_pin {
		qcom,pins = <&gp 96>;
		qcom,num-grp-pins = <1>;
		label = "bma2x2_int1_pin";
		bma2x2_int1_default: int1_default {
			drive-strength = <6>;
			bias-pull-up;
		};
		bma2x2_int1_sleep: int1_sleep {
			drive-strength = <2>;
			bias-pull-down;
		};
	};

	bma2x2_int2_pin {
		qcom,pins = <&gp 65>;
		qcom,num-grp-pins = <1>;
		label = "bma2x2_int2_pin";
		bma2x2_int2_default: int2_default {
			drive-strength = <6>;
			bias-pull-up;
		};
		bma2x2_int2_sleep: int2_sleep {
			drive-strength = <2>;
			bias-pull-down;
		};
	};
};

&soc {
	i2c@78b9000 { /* BLSP1 QUP5 */
		synaptics@20 {
			compatible = "synaptics,rmi4";
			reg = <0x22>;
			interrupt-parent = <&msm_gpio>;
			interrupts = <13 0x2008>;
			vdd-supply = <&pm8916_l17>;
			vcc_i2c-supply = <&pm8916_l6>;
			/* pins used by touchscreen */
			pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release";
			pinctrl-0 = <&ts_int_active &ts_reset_active>;
			pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
			pinctrl-2 = <&ts_release>;
			synaptics,display-coords = <0 0 720 1280>;
			synaptics,panel-coords = <0 0 720 1480>;
			synaptics,irq-gpio = <&msm_gpio 13 0x2008>;
			synaptics,reset-gpio = <&msm_gpio 12 0x0>;
			synaptics,i2c-pull-up;
			synaptics,power-down;
			synaptics,disable-gpios;
			synaptics,button-map = <139 172 158>;
		};
	};

	gen-vkeys {
		compatible = "qcom,gen-vkeys";
		label = "ft5x06_ts";
		qcom,disp-maxx = <480>;
		qcom,disp-maxy = <854>;
		qcom,panel-maxx = <480>;
		qcom,panel-maxy = <946>;
		qcom,key-codes = <139 172 158>;
		qcom,y-offset = <0>;
	};

	gpio-leds {
		compatible = "gpio-leds";
		keypad-backlight {
			gpios = <&msm_gpio 97 0>;
			label = "button-backlight";
			linux,default-trigger = "none";
		};
	};

	i2c@78b5000 { /* BLSP1 QUP1 */
		liteon@23 {
			compatible = "liteon,ltr553";
			reg = <0x23>;
			vdd-supply = <&pm8916_l17>;
			vio-supply = <&pm8916_l6>;
			interrupt-parent = <&msm_gpio>;
			interrupts = <94 0x2002>;
			pinctrl-names = "default","sleep";
			pinctrl-0 = <&ltr553_default>;
			pinctrl-1 = <&ltr553_sleep>;
			liteon,irq-gpio = <&msm_gpio 94 0x2002>;
			liteon,als-ps-persist = <0>;
			liteon,ps-led = <0x7f>;
			liteon,ps-pulses = <4>;
			liteon,wakeup-threshold = <4>;
			liteon,als-integration-time = <0>;
			liteon,ps-distance-table =
				<1000 980 960 950 940 920 900>;
		};

		bosch@18 { /* Accelerometer sensor */
			compatible = "bosch,bma2x2";
			reg = <0x18>;
			pinctrl-names = "default";
			pinctrl-0 = <&bma2x2_int1_default &bma2x2_int2_default>;
			pinctrl-1 = <&bma2x2_int1_sleep &bma2x2_int2_sleep>;
			interrupt-parent = <&msm_gpio>;
			interrupts = <96 0x2002>;
			vdd-supply = <&pm8916_l17>;
			vio-supply = <&pm8916_l6>;
			bosch,init-interval = <200>;
			bosch,place = <5>;
			bosch,gpio-int1 = <&msm_gpio 96 0x2002>;
			bosch,gpio-int2 = <&msm_gpio 65 0x2002>;
			bosch,use-hrtimer;
		};

		akm@0c {
			compatible = "ak,ak09911";
			reg = <0x0c>;
			pinctrl-names = "default","sleep";
			pinctrl-0 = <&akm_default>;
			pinctrl-1 = <&akm_sleep>;
			vdd-supply = <&pm8916_l17>;
			vio-supply = <&pm8916_l6>;
			akm,layout = <0x3>;
			akm,gpio_rstn = <&msm_gpio 36 0x0>;
			akm,auto-report;
			akm,use-hrtimer;
		};
	};
};

&spmi_bus {
	qcom,pm8916@0 {
		qcom,leds@a100 {
			status = "okay";
			qcom,led_mpp_2 {
				label = "mpp";
				linux,name = "red";
				linux,default-trigger = "none";
				qcom,default-state = "off";
				qcom,max-current = <40>;
				qcom,current-setting = <5>;
				qcom,id = <6>;
				qcom,mode = "manual";
				qcom,source-sel = <1>;
				qcom,mode-ctrl = <0x60>;
			};
		};

		qcom,leds@a300 {
			status = "okay";
			qcom,led_mpp_4 {
				label = "mpp";
				linux,name = "green";
				linux,default-trigger = "none";
				qcom,default-state = "off";
				qcom,max-current = <40>;
				qcom,current-setting = <5>;
				qcom,id = <6>;
				qcom,mode = "manual";
				qcom,source-sel = <1>;
				qcom,mode-ctrl = <0x60>;
			};
		};
	};

	qcom,pm8916@1 {
		qcom,vibrator@c000 {
			qcom,vib-vtg-level-mV = <2700>;
		};
	};
};

&mdss_mdp {
	qcom,mdss-pref-prim-intf = "dsi";
};

&pmx_mdss {
	qcom,num-grp-pins = <1>;
	qcom,pins = <&gp 25>;
};

&pmx_mdss_te {
	qcom,num-grp-pins = <1>;
	qcom,pins = <&gp 24>;
};

&mdss_dsi0 {
	qcom,dsi-pref-prim-pan = <&dsi_fl10802_fwvga_video>;
	pinctrl-names = "mdss_default", "mdss_sleep";
	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

	qcom,platform-reset-gpio = <&msm_gpio 25 0>;
};