/*
 * Copyright (c) 2016, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&soc {
};

&i2c_3 {

	qcom,camera@42 {
		compatible = "shinetech,gc0310";
		reg = <0x42 0x0>;
		qcom,slave-id = <0x42 0xf0 0xa310>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <270>;
		qcom,sensor-name = "gc0310";
		cam_vana-supply = <&pm8909_l17>;
		cam_vio-supply = <&pm8909_l6>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-custom-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-vreg-type = <1 0>;
		qcom,cam-vreg-min-voltage = <0 2800000>;
		qcom,cam-vreg-max-voltage = <0 2850000>;
		qcom,cam-vreg-op-mode = <0 80000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_default
				&cam_sensor_front_default>;
		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;
		gpios = <&msm_gpio 27 0>,
			<&msm_gpio 28 0>,
			<&msm_gpio 33 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK",
					"CAM_RESET",
					"CAM_STANDBY";
		qcom,gpio-set-tbl-num = <1 1>;
		qcom,gpio-set-tbl-flags = <0 2>;
		qcom,gpio-set-tbl-delay = <1000 4000>;
		qcom,csi-lane-assign = <0x0004>;
		qcom,csi-lane-mask = <0x18>;
		qcom,sensor-position = <1>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		clocks = <&clock_gcc clk_mclk1_clk_src>,
				<&clock_gcc clk_gcc_camss_mclk1_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
	};

	qcom,camera@0 {
		cell-index = <0>;
		compatible = "qcom,camera";
		reg = <0x2>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <90>;
		cam_vana-supply = <&pm8909_l17>;
		cam_vio-supply = <&pm8909_l6>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-custom-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-vreg-type = <1 0>;
		qcom,cam-vreg-min-voltage = <0 2800000>;
		qcom,cam-vreg-max-voltage = <0 2850000>;
		qcom,cam-vreg-op-mode = <0 80000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
				&cam_sensor_rear_default>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
		gpios = <&msm_gpio 26 0>,
			<&msm_gpio 35 0>,
			<&msm_gpio 34 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK",
			"CAM_RESET1",
			"CAM_STANDBY";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk0_clk_src>,
				<&clock_gcc clk_gcc_camss_mclk0_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
	};

	qcom,camera@1 {
		cell-index = <1>;
		compatible = "qcom,camera";
		reg = <0x1>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <90>;
		cam_vana-supply = <&pm8909_l17>;
		cam_vio-supply = <&pm8909_l6>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-custom-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-vreg-type = <1 0>;
		qcom,cam-vreg-min-voltage = <0 2850000>;
		qcom,cam-vreg-max-voltage = <0 2850000>;
		qcom,cam-vreg-op-mode = <0 80000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_default &cam_sensor_front_default>;
		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;
		gpios = <&msm_gpio 27 0>,
			<&msm_gpio 28 0>,
			<&msm_gpio 33 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK",
			"CAM_RESET",
			"CAM_STANDBY";
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk1_clk_src>,
				<&clock_gcc clk_gcc_camss_mclk1_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
	};
};