/*
 *  vl53l0x_i2c_platform.h - Linux kernel modules for STM VL53L0 FlightSense TOF
 *						 sensor
 *
 *  Copyright (C) 2016 STMicroelectronics Imaging Division.
 *  Copyright (c) 2018, The Linux Foundation. All rights reserved.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 */



/**
 * @file   VL_i2c_platform.h
 * @brief  Function prototype definitions for EWOK Platform layer.
 *
 */


#ifndef _VL_I2C_PLATFORM_H_
#define _VL_I2C_PLATFORM_H_

#include "vl53l0x_def.h"


/** Maximum buffer size to be used in i2c */
#define VL_MAX_I2C_XFER_SIZE   64

/**
 *  @brief Typedef defining .\n
 * The developer should modify this to suit the platform being deployed.
 *
 */

/**
 * @brief Typedef defining 8 bit unsigned char type.\n
 * The developer should modify this to suit the platform being deployed.
 *
 */
#define	   I2C                0x01
#define	   SPI                0x00

#define    COMMS_BUFFER_SIZE    64
/*MUST be the same size as the SV task buffer */

#define    BYTES_PER_WORD        2
#define    BYTES_PER_DWORD       4

#define    VL_MAX_STRING_LENGTH_PLT       256

/**
 * @brief  Initialise platform comms.
 *
 * @param  comms_type      - selects between I2C and SPI
 * @param  comms_speed_khz - unsigned short containing the I2C speed in kHz
 *
 * @return status - status 0 = ok, 1 = error
 *
 */

int32_t VL_comms_initialise(uint8_t  comms_type,
			uint16_t comms_speed_khz);

/**
 * @brief  Close platform comms.
 *
 * @return status - status 0 = ok, 1 = error
 *
 */

int32_t VL_comms_close(void);

/**
 * @brief  Cycle Power to Device
 *
 * @return status - status 0 = ok, 1 = error
 *
 */

int32_t VL_cycle_power(void);

int32_t VL_set_page(struct vl_data *dev, uint8_t page_data);

/**
 * @brief Writes the supplied byte buffer to the device
 *
 * Wrapper for SystemVerilog Write Multi task
 *
 * @code
 *
 * Example:
 *
 * uint8_t *spad_enables;
 *
 * int status = VL_write_multi(RET_SPAD_EN_0, spad_enables, 36);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index - uint8_t register index value
 * @param  pdata - pointer to uint8_t buffer containing the data to be written
 * @param  count - number of bytes in the supplied byte buffer
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_write_multi(struct vl_data *dev, uint8_t index, uint8_t  *pdata,
		int32_t count);


/**
 * @brief  Reads the requested number of bytes from the device
 *
 * Wrapper for SystemVerilog Read Multi task
 *
 * @code
 *
 * Example:
 *
 * uint8_t buffer[COMMS_BUFFER_SIZE];
 *
 * int status = status  = VL_read_multi(DEVICE_ID, buffer, 2)
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index - uint8_t register index value
 * @param  pdata - pointer to the uint8_t buffer to store read data
 * @param  count - number of uint8_t's to read
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_read_multi(struct vl_data *dev,  uint8_t index, uint8_t  *pdata,
		int32_t count);


/**
 * @brief  Writes a single byte to the device
 *
 * Wrapper for SystemVerilog Write Byte task
 *
 * @code
 *
 * Example:
 *
 * uint8_t page_number = MAIN_SELECT_PAGE;
 *
 * int status = VL_write_byte(PAGE_SELECT, page_number);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index - uint8_t register index value
 * @param  data  - uint8_t data value to write
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_write_byte(struct vl_data *dev,  uint8_t index, uint8_t   data);


/**
 * @brief  Writes a single word (16-bit unsigned) to the device
 *
 * Manages the big-endian nature of the device (first byte written is the
 * MS byte).
 * Uses SystemVerilog Write Multi task.
 *
 * @code
 *
 * Example:
 *
 * uint16_t nvm_ctrl_pulse_width = 0x0004;
 *
 * int status = VL_write_word(NVM_CTRL__PULSE_WIDTH_MSB,
 * nvm_ctrl_pulse_width);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index - uint8_t register index value
 * @param  data  - uin16_t data value write
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_write_word(struct vl_data *dev,  uint8_t index, uint16_t  data);


/**
 * @brief  Writes a single dword (32-bit unsigned) to the device
 *
 * Manages the big-endian nature of the device (first byte written is the
 * MS byte).
 * Uses SystemVerilog Write Multi task.
 *
 * @code
 *
 * Example:
 *
 * uint32_t nvm_data = 0x0004;
 *
 * int status = VL_write_dword(NVM_CTRL__DATAIN_MMM, nvm_data);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index - uint8_t register index value
 * @param  data  - uint32_t data value to write
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_write_dword(struct vl_data *dev, uint8_t index, uint32_t  data);



/**
 * @brief  Reads a single byte from the device
 *
 * Uses SystemVerilog Read Byte task.
 *
 * @code
 *
 * Example:
 *
 * uint8_t device_status = 0;
 *
 * int status = VL_read_byte(STATUS, &device_status);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index  - uint8_t register index value
 * @param  pdata  - pointer to uint8_t data value
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_read_byte(struct vl_data *dev,  uint8_t index, uint8_t  *pdata);


/**
 * @brief  Reads a single word (16-bit unsigned) from the device
 *
 * Manages the big-endian nature of the device (first byte read is the MS byte).
 * Uses SystemVerilog Read Multi task.
 *
 * @code
 *
 * Example:
 *
 * uint16_t timeout = 0;
 *
 * int status = VL_read_word(TIMEOUT_OVERALL_PERIODS_MSB, &timeout);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index  - uint8_t register index value
 * @param  pdata  - pointer to uint16_t data value
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_read_word(struct vl_data *dev,  uint8_t index, uint16_t *pdata);


/**
 * @brief  Reads a single dword (32-bit unsigned) from the device
 *
 * Manages the big-endian nature of the device (first byte read is the MS byte).
 * Uses SystemVerilog Read Multi task.
 *
 * @code
 *
 * Example:
 *
 * uint32_t range_1 = 0;
 *
 * int status = VL_read_dword(RANGE_1_MMM, &range_1);
 *
 * @endcode
 *
 * @param  address - uint8_t device address value
 * @param  index - uint8_t register index value
 * @param  pdata - pointer to uint32_t data value
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_read_dword(struct vl_data *dev, uint8_t index, uint32_t *pdata);


/**
 * @brief  Implements a programmable wait in us
 *
 * Wrapper for SystemVerilog Wait in micro seconds task
 *
 * @param  wait_us - integer wait in micro seconds
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_platform_wait_us(int32_t wait_us);


/**
 * @brief  Implements a programmable wait in ms
 *
 * Wrapper for SystemVerilog Wait in milli seconds task
 *
 * @param  wait_ms - integer wait in milli seconds
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_wait_ms(int32_t wait_ms);


/**
 * @brief Set GPIO value
 *
 * @param  level  - input  level - either 0 or 1
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_set_gpio(uint8_t  level);


/**
 * @brief Get GPIO value
 *
 * @param  plevel - uint8_t pointer to store GPIO level (0 or 1)
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_get_gpio(uint8_t *plevel);

/**
 * @brief Release force on GPIO
 *
 * @return status - SystemVerilog status 0 = ok, 1 = error
 *
 */

int32_t VL_release_gpio(void);


/**
* @brief Get the frequency of the timer used for ranging results time stamps
*
* @param[out] ptimer_freq_hz : pointer for timer frequency
*
* @return status : 0 = ok, 1 = error
*
*/

int32_t VL_get_timer_frequency(int32_t *ptimer_freq_hz);

/**
* @brief Get the timer value in units of timer_freq_hz
* (see VL_get_timestamp_frequency())
*
* @param[out] ptimer_count : pointer for timer count value
*
* @return status : 0 = ok, 1 = error
*
*/

int32_t VL_get_timer_value(int32_t *ptimer_count);
int VL_I2CWrite(struct vl_data *dev, uint8_t *buff, uint8_t len);
int VL_I2CRead(struct vl_data *dev, uint8_t *buff, uint8_t len);

#endif /* _VL_I2C_PLATFORM_H_ */