/*!
 * @section LICENSE
 * (C) Copyright 2011~2016 Bosch Sensortec GmbH All Rights Reserved
 *
 * (C) Modification Copyright 2018 Robert Bosch Kft  All Rights Reserved
 *
 * This software program is licensed subject to the GNU General
 * Public License (GPL).Version 2,June 1991,
 * available at http://www.fsf.org/copyleft/gpl.html
 *
 * Special: Description of the Software:
 *
 * This software module (hereinafter called "Software") and any
 * information on application-sheets (hereinafter called "Information") is
 * provided free of charge for the sole purpose to support your application
 * work. 
 *
 * As such, the Software is merely an experimental software, not tested for
 * safety in the field and only intended for inspiration for further development 
 * and testing. Any usage in a safety-relevant field of use (like automotive,
 * seafaring, spacefaring, industrial plants etc.) was not intended, so there are
 * no precautions for such usage incorporated in the Software.
 * 
 * The Software is specifically designed for the exclusive use for Bosch
 * Sensortec products by personnel who have special experience and training. Do
 * not use this Software if you do not have the proper experience or training.
 * 
 * This Software package is provided as is and without any expressed or
 * implied warranties, including without limitation, the implied warranties of
 * merchantability and fitness for a particular purpose.
 * 
 * Bosch Sensortec and their representatives and agents deny any liability for
 * the functional impairment of this Software in terms of fitness, performance
 * and safety. Bosch Sensortec and their representatives and agents shall not be
 * liable for any direct or indirect damages or injury, except as otherwise
 * stipulated in mandatory applicable law.
 * The Information provided is believed to be accurate and reliable. Bosch
 * Sensortec assumes no responsibility for the consequences of use of such
 * Information nor for any infringement of patents or other rights of third
 * parties which may result from its use.
 * 
 *------------------------------------------------------------------------------
 * The following Product Disclaimer does not apply to the BSX4-HAL-4.1NoFusion Software 
 * which is licensed under the Apache License, Version 2.0 as stated above.  
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Product Disclaimer
 *
 * Common:
 *
 * Assessment of Products Returned from Field
 *
 * Returned products are considered good if they fulfill the specifications / 
 * test data for 0-mileage and field listed in this document.
 *
 * Engineering Samples
 * 
 * Engineering samples are marked with (e) or (E). Samples may vary from the
 * valid technical specifications of the series product contained in this
 * data sheet. Therefore, they are not intended or fit for resale to
 * third parties or for use in end products. Their sole purpose is internal
 * client testing. The testing of an engineering sample may in no way replace
 * the testing of a series product. Bosch assumes no liability for the use
 * of engineering samples. The purchaser shall indemnify Bosch from all claims
 * arising from the use of engineering samples.
 *
 * Intended use
 *
 * Provided that SMI130 is used within the conditions (environment, application,
 * installation, loads) as described in this TCD and the corresponding
 * agreed upon documents, Bosch ensures that the product complies with
 * the agreed properties. Agreements beyond this require
 * the written approval by Bosch. The product is considered fit for the intended
 * use when the product successfully has passed the tests
 * in accordance with the TCD and agreed upon documents.
 *
 * It is the responsibility of the customer to ensure the proper application
 * of the product in the overall system/vehicle.
 *
 * Bosch does not assume any responsibility for changes to the environment
 * of the product that deviate from the TCD and the agreed upon documents 
 * as well as all applications not released by Bosch
  *
 * The resale and/or use of products are at the purchaser’s own risk and 
 * responsibility. The examination and testing of the SMI130 
 * is the sole responsibility of the purchaser.
 *
 * The purchaser shall indemnify Bosch from all third party claims 
 * arising from any product use not covered by the parameters of 
 * this product data sheet or not approved by Bosch and reimburse Bosch 
 * for all costs and damages in connection with such claims.
 *
 * The purchaser must monitor the market for the purchased products,
 * particularly with regard to product safety, and inform Bosch without delay
 * of all security relevant incidents.
 *
 * Application Examples and Hints
 *
 * With respect to any application examples, advice, normal values
 * and/or any information regarding the application of the device,
 * Bosch hereby disclaims any and all warranties and liabilities of any kind,
 * including without limitation warranties of
 * non-infringement of intellectual property rights or copyrights
 * of any third party.
 * The information given in this document shall in no event be regarded 
 * as a guarantee of conditions or characteristics. They are provided
 * for illustrative purposes only and no evaluation regarding infringement
 * of intellectual property rights or copyrights or regarding functionality,
 * performance or error has been made.
 *
 * @filename boschcalss.h
 * @date     2015/11/17 13:44
 * @Modification Date 2018/08/28 18:20
 * @id       "836294d"
 * @version  1.5.9
 *
 * @brief  
 */

#ifndef _BSTCLASS_H
#define _BSTCLASS_H

#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
#else
#include <sys/time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <linux/types.h>
#endif

#include <linux/device.h>
#include <linux/fs.h>
#include <linux/mod_devicetable.h>

struct bosch_dev {
	const char *name;

	int (*open)(struct bosch_dev *dev);
	void (*close)(struct bosch_dev *dev);
	struct mutex mutex;
	struct device dev;
	struct list_head node;
};

#define to_bosch_dev(d) container_of(d, struct bosch_dev, dev)

struct bosch_dev *bosch_allocate_device(void);
void bosch_free_device(struct bosch_dev *dev);

static inline struct bosch_dev *bosch_get_device(struct bosch_dev *dev)
{
	return dev ? to_bosch_dev(get_device(&dev->dev)) : NULL;
}

static inline void bosch_put_device(struct bosch_dev *dev)
{
	if (dev)
		put_device(&dev->dev);
}

static inline void *bosch_get_drvdata(struct bosch_dev *dev)
{
	return dev_get_drvdata(&dev->dev);
}

static inline void bosch_set_drvdata(struct bosch_dev *dev, void *data)
{
	dev_set_drvdata(&dev->dev, data);
}

int __must_check bosch_register_device(struct bosch_dev *);
void bosch_unregister_device(struct bosch_dev *);

void bosch_reset_device(struct bosch_dev *);


extern struct class bosch_class;

#endif