/* * Copyright (C) 2007 Google, Inc. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__ #define __LINUX_USB_GADGET_MSM72K_UDC_H__ #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) #define USB_GENCONFIG (MSM_USB_BASE + 0x009C) #define USB_GENCONFIG2 (MSM_USB_BASE + 0x00A0) #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_HS_GPTIMER_BASE (MSM_USB_BASE + 0x80) #define USB_HS_APF_CTRL (MSM_USB_BASE + 0x0380) #define GENCFG2_SESS_VLD_CTRL_EN BIT(7) #define GENCFG2_LINESTATE_DIFF_WAKEUP_EN BIT(12) #define GENCFG2_SYS_CLK_HOST_DEV_GATE_EN BIT(13) #define GENCFG2_DPSE_DMSE_HV_INTR_EN BIT(15) #define GENCFG2_TX_BUF_PREFETCH_FIX_EN BIT(26) #define APF_CTRL_EN BIT(0) #define USB_USBCMD (MSM_USB_BASE + 0x0140) #define USB_USBSTS (MSM_USB_BASE + 0x0144) #define USB_PORTSC (MSM_USB_BASE + 0x0184) #define USB_OTGSC (MSM_USB_BASE + 0x01A4) #define USB_USBMODE (MSM_USB_BASE + 0x01A8) #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) #define USBCMD_RESET 2 #define USBCMD_SESS_VLD_CTRL BIT(25) #define USBCMD_FS_SELECT BIT(27) #define USB_USBINTR (MSM_USB_BASE + 0x0148) #define USB_FRINDEX (MSM_USB_BASE + 0x014C) #define USB_L1_EP_CTRL (MSM_USB_BASE + 0x0250) #define USB_L1_CONFIG (MSM_USB_BASE + 0x0254) #define L1_CONFIG_LPM_EN BIT(4) #define L1_CONFIG_REMOTE_WAKEUP BIT(5) #define L1_CONFIG_GATE_SYS_CLK BIT(7) #define L1_CONFIG_PHY_LPM BIT(10) #define L1_CONFIG_PLL BIT(11) #define AHB2AHB_BYPASS BIT(31) #define AHB2AHB_BYPASS_BIT_MASK BIT(31) #define AHB2AHB_BYPASS_CLEAR (0 << 31) #define PORTSC_PTS_MASK (3 << 30) #define PORTSC_PTS_ULPI (2 << 30) #define PORTSC_PTS_SERIAL (3 << 30) #define PORTSC_SPRT (1 << 25) /* phy suspend mode */ #define PORTSC_PHCD (1 << 23) /* phy suspend mode */ #define PORTSC_PP (1 << 12) #define PORTSC_LS (3 << 10) #define PORTSC_LS_DM (1 << 10) #define PORTSC_SUSP_MASK (1 << 7) /* Port Suspend */ #define PORTSC_FPR_MASK (1 << 6) #define PORTSC_CSC (1 << 1) #define PORTSC_CCS (1 << 0) #define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170) #define ULPI_RUN (1 << 30) #define ULPI_WRITE (1 << 29) #define ULPI_READ (0 << 29) #define ULPI_SYNC_STATE (1 << 27) #define ULPI_ADDR(n) (((n) & 255) << 16) #define ULPI_DATA(n) ((n) & 255) #define ULPI_DATA_READ(n) (((n) >> 8) & 255) #define GENCONFIG_BAM_DISABLE (1 << 13) #define GENCONFIG_TXFIFO_IDLE_FORCE_DISABLE (1 << 4) #define GENCONFIG_ULPI_SERIAL_EN (1 << 5) /* synopsys 28nm phy registers */ #define ULPI_PWR_CLK_MNG_REG 0x88 #define OTG_COMP_DISABLE BIT(0) /* ulpi manual dp registers */ #define ULPI_MISC_A 0x96 #define ULPI_MISC_A_VBUSVLDEXT BIT(0) #define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ #define PHY_IDHV_INTEN (1 << 8) /* PHY ID HV interrupt */ #define PHY_OTGSESSVLDHV_INTEN (1 << 9) /* PHY Session Valid HV int. */ #define PHY_CLAMP_DPDMSE_EN (1 << 21) /* PHY mpm DP DM clamp enable */ #define PHY_POR_BIT_MASK BIT(0) #define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */ #define PHY_POR_DEASSERT (0 << 0) /* USB2 28nm PHY POR DEASSERT */ /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16) #define OTGSC_IDPU (1 << 5) #define OTGSC_INTR_MASK (0x7f << 24) #define OTGSC_HADP (1 << 6) #define OTGSC_ID (1 << 8) #define OTGSC_BSV (1 << 11) #define OTGSC_IDIS (1 << 16) #define OTGSC_BSVIS (1 << 19) #define OTGSC_IDIE (1 << 24) #define OTGSC_BSVIE (1 << 27) /* USB PHY CSR registers and bit definitions */ #define USB_PHY_CSR_PHY_CTRL_COMMON0 (MSM_USB_PHY_CSR_BASE + 0x078) #define SIDDQ BIT(2) #define USB_PHY_CSR_PHY_CTRL1 (MSM_USB_PHY_CSR_BASE + 0x08C) #define ID_HV_CLAMP_EN_N BIT(1) #define USB_PHY_CSR_PHY_CTRL3 (MSM_USB_PHY_CSR_BASE + 0x094) #define CLAMP_MPM_DPSE_DMSE_EN_N BIT(2) #define USB2_PHY_USB_PHY_IRQ_CMD (MSM_USB_PHY_CSR_BASE + 0x0D0) #define USB2_PHY_USB_PHY_INTERRUPT_SRC_STATUS (MSM_USB_PHY_CSR_BASE + 0x05C) #define USB2_PHY_USB_PHY_INTERRUPT_STATUS0 (MSM_USB_PHY_CSR_BASE + 0x03C) #define USB2_PHY_USB_PHY_INTERRUPT_STATUS1 (MSM_USB_PHY_CSR_BASE + 0x040) #define USB2_PHY_USB_PHY_INTERRUPT_CLEAR0 (MSM_USB_PHY_CSR_BASE + 0x0DC) #define USB2_PHY_USB_PHY_INTERRUPT_CLEAR1 (MSM_USB_PHY_CSR_BASE + 0x0E0) #define USB2_PHY_USB_PHY_INTERRUPT_MASK0 (MSM_USB_PHY_CSR_BASE + 0x0D4) #define USB2_PHY_USB_PHY_INTERRUPT_MASK1 (MSM_USB_PHY_CSR_BASE + 0x0D8) #define USB_PHY_IDDIG_1_0 BIT(7) #define USB_PHY_IDDIG_RISE_MASK BIT(0) #define USB_PHY_IDDIG_FALL_MASK BIT(1) #define USB_PHY_ID_MASK (USB_PHY_IDDIG_RISE_MASK | USB_PHY_IDDIG_FALL_MASK) #endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */