/* * Copyright (c) 2012-2013 The Linux Foundation. All rights reserved. * * Previously licensed under the ISC license by Qualcomm Atheros, Inc. * * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* * This file was originally distributed by Qualcomm Atheros, Inc. * under proprietary terms before Copyright ownership was assigned * to the Linux Foundation. */ /* * File: $File: //depot/software/projects/feature_branches/gen5_phase1/os/linux/classic/ap/apps/include/aniErrors.h $ * * Contains definitions of error codes that are globally visible * across WNI applications. There are two kinds of error codes: * generic error codes and module specific error codes. Module specific * error codes can further be of two kinds: those that are used * internally within sub-modules, and those that are made visible * to other modules. Each module will be pre-allocated a range of * negative integers from which to choose both internal and external * error codes uniquely. Note that internally used error codes need * not be defined in this file so long as they adhere to the allocated * range. * * Author: Mayank D. Upadhyay * Date: 17-June-2002 * History:- * Date Modified by Modification Information * ------------------------------------------------------ * */ #ifndef _ANI_ERRORS_H_ #define _ANI_ERRORS_H_ /** * Indicates that the function returned successfully and no error was * reported. */ #define ANI_OK 0 #define ANI_ERROR ANI_E_FAILED /** * The range -1 to -1024 is reserved for generic error codes that are * applicable to all modules. */ #define ANI_E_FAILED -1 /// Generic error code for failure #define ANI_E_MALLOC_FAILED -2 /// Mem allocation failed #define ANI_E_ILLEGAL_ARG -3 /// Function argument is illegal #define ANI_E_NULL_VALUE -4 /// Encountered unexpected NULL value #define ANI_E_RAND_FAILED -5 /// RNG failed #define ANI_E_SHORT_PACKET -6 /// Packet is too small to contain data #define ANI_E_ELEM_NOT_FND -7 /// Element not found #define ANI_E_INVALID_LEN -8 /// Element has invalid Length #define ANI_E_INVALID_DT -9 /// Invalid Data Type #define ANI_E_TIMEOUT -10 /// Timeout occurred #define ANI_E_DBM_INVALID_ID -11 /// Invalid DB id sent to server #define ANI_E_DBM_KEY_NOT_FOUND -12 /// Key's mapping was not found #define ANI_E_FILE_EMPTY -13 /// file empty #define ANI_E_INVALID_MT -14 /// Invalid ANI message type #define ANI_E_NOT_IMPLEMENTED -15 /// Feature not implemented #define ANI_E_INVALID_PT -16 /// Invalid Parameter Type #define ANI_E_INVALID_PV -17 /// Invalid Paramter Value #define ANI_E_IPCOPEN -18 /// IPC open failed #define ANI_E_IPCCONNECT -19 /// IPC connect failed #define ANI_E_IPCSEND -20 /// IPC send failed #define ANI_E_FILE_NOT_FOUND -21 /// file not found #define ANI_E_FILE_INVALID_CONTENT -22 /// invalid file content #define ANI_E_FILE_READ_FAILED -23 /// file read failed // ***** SSM libraries and applications use the range -1025 to -2999 ***** /* * The range -1025 to -2048 is reserved for use by the * authentication agent and its sub-modules. The sub-range -1029 to * -1150 is reserved for CLI usage. */ #define ANI_E_RANGE_START_AAG -1025 // CLI Range starts here... #define ANI_E_RANGE_START_AAG_CLI -1029 #define ANI_E_CLI_ARG_MISSING -1029 // CLI command param missing #define ANI_E_CLI_ARG_INVALID -1030 // CLI command param invalid #define ANI_E_CLI_PAM_RADIUS_DB_UPDATE_FAILURE -1031 // Failure to update PAM RADIUS DB #define ANI_E_CLI_AUTH_SERVER_NOT_FOUND -1032 // Auth server not found #define ANI_E_CLI_SYS_INTERNAL_ERROR_PACKET_NULL -1033 // Internal error #define ANI_E_CLI_INVALID_DEVICE -1034 // Invalid device #define ANI_E_CLI_AUTH_SERVER_INVALID_IPADDR -1035 // Invalid IP addr #define ANI_E_CLI_AUTH_ZONE_NOT_EMPTY -1036 // zone not empty #define ANI_E_CLI_AUTH_ZONE_AUTH_SERVERS_NOT_COPIED -1037 // zone not copied #define ANI_E_CLI_AUTH_ZONE_NAME_MISSING -1038 // zone name missing #define ANI_E_CLI_AUTH_ZONE_EMPTY -1039 // zone empty #define ANI_E_CLI_AUTH_ZONE_NOT_FOUND -1040 // zone not found #define ANI_E_CLI_AUTH_SERVER_ARG_NOT_FOUND -1041 // Cli Auth server arg missing #define ANI_E_CLI_IFNAME_ARG_NOT_FOUND -1042 // Ifname arg missing #define ANI_E_CLI_KEYINDEX_ARG_NOT_FOUND -1043 // Keyindex arg missing #define ANI_E_CLI_KEYLENGTH_ARG_NOT_FOUND -1044 // KeyLength arg missing #define ANI_E_CLI_KEYLENGTH_ARG_INVALID -1045 // KeyLength arg invalid #define ANI_E_CLI_SET_WEP_KEY_FAILED -1046 // Set Wep key failed #define ANI_E_CLI_SYS_INTERNAL_ERROR -1047 // Internal error #define ANI_E_CLI_OLD_PASSWORD_MISSING -1048 // Old password missing #define ANI_E_CLI_NEW_PASSWORD_MISSING -1049 // New password // missing #define ANI_E_CLI_WEP_KEY_LEN_ERROR -1051 // key length error #define ANI_E_CLI_WEP_KEY_HEX_ERROR -1052 // no hex character #define ANI_E_CLI_WPA_MODES_CFG_ERROR -1053 // WPA config error #define ANI_E_CLI_WEP_AND_OPEN_CFG_ERROR -1054 // WEP and open error #define ANI_E_CLI_OPEN_AND_WEP_CFG_ERROR -1055 // open and WEP error #define ANI_E_CLI_LEGACY_WEP_AND_OPEN_CFG_ERROR -1056 // WEP and open error #define ANI_E_CLI_OPEN_AND_LEGACY_WEP_CFG_ERROR -1057 // open and WEP error #define ANI_E_CLI_WPA_MODES_NOT_AVAILABLE -1058 // WPA modes not active #define ANI_E_CLI_INVALID_LISENCE_KEY -1059 // invalid license #define ANI_E_CLI_EXISTING_LISENCE_KEY -1060 // duplicated license #define ANI_E_CLI_WEP_INVALID_LENGTH_CHANGE -1061 // invalid length change #define ANI_E_CLI_CNF_PASSWORD_MISMATCH -1062 // confirm password mismatch #define ANI_E_CLI_INVALID_DISABLE -1063 // cannot disable all sec modes #define ANI_E_CLI_PACKNUM_RANGE_ERROR -1064 // cannot disable all sec modes #define ANI_E_CLI_IP_ADDR_INVALID -1065 // IP address invalid #define ANI_E_CLI_AUTH_ZONE_NAME_INVALID -1066 // zone name invalid #define ANI_E_CLI_OLD_PASSWORD_INVALID -1067 // Old password invalid #define ANI_E_CLI_NO_EXT_RAD_ON_NONSECP -1068 // Cannot add ext auth-server on // non-SEC/P with RAD proxying on #define ANI_E_CLI_NO_EXT_AUTH_ZONE_ALLOWED -1069 // Cannot add ext auth-zone on // with RAD proxying on #define ANI_E_CLI_PORTAL_ZONE_AUTO_CONFIGURED -1070 // Cannot manage portal auth-zone #define ANI_E_CLI_DEL_REQ_ON_REF_AUTH_SERVER -1071 // Cannot delete auth-server // that is in a zone #define ANI_E_CLI_DEL_REQ_ON_REF_AUTH_ZONE -1072 // Cannot delete auth-zone // that is used by SSID #define ANI_E_CLI_INVALID_INTERIM_UPDT_VALUE -1073 // Invalid Accounting interim update interval #define ANI_E_RANGE_END_AAG_CLI -1199 // ...CLI Range ends here // Non-CLI related error codes.. #define ANI_E_MIC_FAILED -1200 // A MIC check failed #define ANI_E_REPLAY_CHECK_FAILED -1201 // Replay Ctr mismatch #define ANI_E_RADIUS_PROFILE_MISSING -1202 // User profile // not found #define ANI_E_AUTH_FAILED -1203 // Authentication failed #define ANI_E_RADIUS_PRIV_LEVEL_MISSING -1204 // ANI_ADMIN_LEVEL is missing #define ANI_E_RADIUS_PRIV_LEVEL_INCORRECT -1205 // ANI_ADMIN_LEVEL is incorrect // For some reason this is not contiguous with the other error codes(???) #define ANI_E_INVALID_COOKIE -1300 // Invalid cookie #define ANI_E_RANGE_END_AAG -2048 /* * The range -2049 to -2148 is reserved for use by the * RADIUS client side library. */ #define ANI_E_RANGE_START_RAD -2049 #define ANI_E_RAD_FAILED -2049 /// RADIUS operation failed #define ANI_E_RAD_ATTR_TOO_LONG -2050 /// Attribute too long #define ANI_E_RAD_UNSOLICITED_RESP -2051 /// Unsolicited response #define ANI_E_RAD_BAD_RESP_AUTH -2052 /// Response auth check failed #define ANI_E_RAD_BAD_MESSG_AUTH -2053 /// Response signature invalid #define ANI_E_RAD_ATTR_NOT_FOUND -2054 /// Requested attr not found #define ANI_E_RAD_TIMEOUT -2055 /// Request timed out waiting for server #define ANI_E_RAD_REJECT -2056 /// Radius server did not accept user #define ANI_E_RANGE_END_RAD -2148 /* * The range -2149 to -2999 is reserved for use by the SSM library. */ #define ANI_E_RANGE_START_SSM -2149 #define ANI_E_SSM_CERT_UNPARSEABLE (ANI_E_RANGE_START_SSM - 1) #define ANI_E_SSM_CERT_EXPIRED (ANI_E_RANGE_START_SSM - 2) #define ANI_E_SSM_CERT_THUMBPRINT_MISMATCH (ANI_E_RANGE_START_SSM - 3) #define ANI_E_SSM_CERT_NEW_ID (ANI_E_RANGE_START_SSM - 4) #define ANI_E_RANGE_END_SSM -2999 /* * The range -3000 to -3500 is reserved for use by the * NetSim Server, Client, Client Modules and Pseudo driver */ #define ANI_E_RANGE_START_NETSIM -3000 #define ANI_E_RANGE_END_NETSIM -3500 /* * The range -3501 to -4000 is reserved for use by the * Discovery Server and its libraries. */ #define ANI_E_RANGE_START_DISC -3501 #define ANI_E_RANGE_END_DISC -4000 /* * The range -4001 to -4500 is reserved for use by the * Ezcfg Server */ #define ANI_E_RANGE_START_EZC -4001 // See file aniNmpEzcSvcMsgs.h for EZC specific error codes and messages #define ANI_E_RANGE_END_EZC -4500 /* * The range -4501 to -4600 is reserved for use by the * Software Download (SWD) Server */ #define ANI_E_RANGE_START_SWD -4501 // See file aniSwdSvcMsgs.h for SWD specific error codes and messages #define ANI_E_RANGE_END_SWD -4600 /* * The range -4601 to -4700 is reserved for use by the * Data Distribution Service (DDS) Server */ #define ANI_E_RANGE_START_DDS -4601 // See file aniDdsSvcMsgs.h for DDS specific error codes and messages #define ANI_E_RANGE_END_DDS -4700 /* * The range -4701 to -4800 is reserved for use by * HTTPS components. */ #define ANI_E_RANGE_START_HTTPS -4701 #define ANI_E_HTTPS_UNREACHABLE (ANI_E_RANGE_START_HTTPS - 0) #define ANI_E_HTTPS_UNTRUSTED_CERT (ANI_E_RANGE_START_HTTPS - 1) #define ANI_E_HTTPS_RECVD_ALERT (ANI_E_RANGE_START_HTTPS - 2) #define ANI_E_HTTPS_FAILED (ANI_E_RANGE_START_HTTPS - 3) #define ANI_E_RANGE_END_HTTPS -4800 /* * The range -4801 to -4900 is reserved for use by * enrollment components. */ #define ANI_E_RANGE_START_ENROLLMENT -4801 #define ANI_E_ENROLL_TP_AVAILABLE (ANI_E_RANGE_START_ENROLLMENT - 0) #define ANI_E_ENROLL_ALREADY_TRUSTED (ANI_E_RANGE_START_ENROLLMENT - 1) #define ANI_E_ENROLL_NOT_FOUND (ANI_E_RANGE_START_ENROLLMENT - 2) #define ANI_E_ENROLL_PWD_FAILED (ANI_E_RANGE_START_ENROLLMENT - 3) #define ANI_E_ENROLL_FAILED (ANI_E_RANGE_START_ENROLLMENT - 4) #define ANI_E_ENROLL_NOT_PRISTINE (ANI_E_RANGE_START_ENROLLMENT - 5) #define ANI_E_RANGE_END_ENROLLMENT -4900 /* * The range -4901 to -5000 is reserved for use by NSM. */ #define ANI_E_RANGE_START_NSM -4901 #define ANI_E_NSM_IPADDR_ASSIGNED (ANI_E_RANGE_START_NSM - 0) #define ANI_E_RANGE_END_NSM -5000 /* * The range -5001 to -5100 is reserved for use by the image * validation library. */ #define ANI_E_RANGE_START_IMAGE -5001 #define ANI_E_IMAGE_INVALID (ANI_E_RANGE_START_IMAGE - 0) #define ANI_E_IMAGE_UNSUPPORTED (ANI_E_RANGE_START_IMAGE - 1) #define ANI_E_RANGE_END_IMAGE -5100 /* * The range -5101 to -5200 is reserved for use by CM */ #define ANI_E_RANGE_START_CM -5101 #define ANI_E_MESG_UNAVAILABLE (ANI_E_RANGE_START_IMAGE - 0) #define ANI_E_RANGE_END_CM -5200 #define ANI_IS_STATUS_SUCCESS( retVal ) ( ( retVal >= 0 ) ) #endif //_ANI_ERRORS_H_