/* * Copyright (c) 2012-2020 The Linux Foundation. All rights reserved. * * Previously licensed under the ISC license by Qualcomm Atheros, Inc. * * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* * This file was originally distributed by Qualcomm Atheros, Inc. * under proprietary terms before Copyright ownership was assigned * to the Linux Foundation. */ #if !defined( HDD_CONFIG_H__ ) #define HDD_CONFIG_H__ /**=========================================================================== \file hdd_Config.h \brief Android WLAN Adapter Configuration functions ==========================================================================*/ /* $HEADER$ */ /*--------------------------------------------------------------------------- Include files -------------------------------------------------------------------------*/ #include #include #include #include #ifdef DHCP_SERVER_OFFLOAD #define IPADDR_NUM_ENTRIES (4) #define IPADDR_STRING_LENGTH (16) #define DHCP_START_POOL_ADDRESS 100 #endif /* DHCP_SERVER_OFFLOAD */ //Number of items that can be configured #define MAX_CFG_INI_ITEMS 1024 #ifdef SAP_AUTH_OFFLOAD /* 802.11 pre-share key length */ #define WLAN_PSK_STRING_LENGTH (64) #endif /* SAP_AUTH_OFFLOAD */ /* * Maximum length of the default SAP interface created using * gEnabledefaultSAP ini param. */ #define CFG_CONCURRENT_IFACE_MAX_LEN 16 // Defines for all of the things we read from the configuration (registry). #define CFG_RTS_THRESHOLD_NAME "RTSThreshold" #define CFG_RTS_THRESHOLD_MIN WNI_CFG_RTS_THRESHOLD_STAMIN // min is 0, meaning always use RTS. #define CFG_RTS_THRESHOLD_MAX WNI_CFG_RTS_THRESHOLD_STAMAX // max is the max frame size #define CFG_RTS_THRESHOLD_DEFAULT WNI_CFG_RTS_THRESHOLD_STADEF #define CFG_FRAG_THRESHOLD_NAME "gFragmentationThreshold" #define CFG_FRAG_THRESHOLD_MIN WNI_CFG_FRAGMENTATION_THRESHOLD_STAMIN #define CFG_FRAG_THRESHOLD_MAX WNI_CFG_FRAGMENTATION_THRESHOLD_STAMAX #define CFG_FRAG_THRESHOLD_DEFAULT WNI_CFG_FRAGMENTATION_THRESHOLD_STADEF #define CFG_CALIBRATION_NAME "gCalibration" #define CFG_CALIBRATION_MIN ( 0 ) #define CFG_CALIBRATION_MAX ( 1 ) #define CFG_CALIBRATION_MAC_DEFAULT ( 1 ) #define CFG_CALIBRATION_DEFAULT CFG_CALIBRATION_MAC_DEFAULT #define CFG_CALIBRATION_PERIOD_NAME "gCalibrationPeriod" #define CFG_CALIBRATION_PERIOD_MIN ( 2 ) #define CFG_CALIBRATION_PERIOD_MAX ( 10 ) #define CFG_CALIBRATION_PERIOD_MAC_DEFAULT ( 5 ) #define CFG_CALIBRATION_PERIOD_DEFAULT CFG_CALIBRATION_PERIOD_MAC_DEFAULT #define CFG_OPERATING_CHANNEL_NAME "gOperatingChannel" #define CFG_OPERATING_CHANNEL_MIN ( 0 ) #define CFG_OPERATING_CHANNEL_MAX ( 14 ) #define CFG_OPERATING_CHANNEL_DEFAULT ( 1 ) #define CFG_SHORT_SLOT_TIME_ENABLED_NAME "gShortSlotTimeEnabled" #define CFG_SHORT_SLOT_TIME_ENABLED_MIN WNI_CFG_SHORT_SLOT_TIME_STAMIN #define CFG_SHORT_SLOT_TIME_ENABLED_MAX WNI_CFG_SHORT_SLOT_TIME_STAMAX #define CFG_SHORT_SLOT_TIME_ENABLED_DEFAULT WNI_CFG_SHORT_SLOT_TIME_STADEF #define CFG_11D_SUPPORT_ENABLED_NAME "g11dSupportEnabled" #define CFG_11D_SUPPORT_ENABLED_MIN WNI_CFG_11D_ENABLED_STAMIN #define CFG_11D_SUPPORT_ENABLED_MAX WNI_CFG_11D_ENABLED_STAMAX #define CFG_11D_SUPPORT_ENABLED_DEFAULT WNI_CFG_11D_ENABLED_STADEF // Default is ON #define CFG_11H_SUPPORT_ENABLED_NAME "g11hSupportEnabled" #define CFG_11H_SUPPORT_ENABLED_MIN ( 0 ) #define CFG_11H_SUPPORT_ENABLED_MAX ( 1 ) #define CFG_11H_SUPPORT_ENABLED_DEFAULT ( 1 ) // Default is ON #define CFG_ENFORCE_11D_CHANNELS_NAME "gEnforce11dChannel" #define CFG_ENFORCE_11D_CHANNELS_MIN ( 0 ) #define CFG_ENFORCE_11D_CHANNELS_MAX ( 1 ) #define CFG_ENFORCE_11D_CHANNELS_DEFAULT ( 0 ) //COUNTRY Code Priority #define CFG_COUNTRY_CODE_PRIORITY_NAME "gCountryCodePriority" #define CFG_COUNTRY_CODE_PRIORITY_MIN ( 0 ) #define CFG_COUNTRY_CODE_PRIORITY_MAX ( 1 ) #define CFG_COUNTRY_CODE_PRIORITY_DEFAULT ( 1 ) #define CFG_ENFORCE_COUNTRY_CODE_MATCH_NAME "gEnforceCountryCodeMatch" #define CFG_ENFORCE_COUNTRY_CODE_MATCH_MIN ( 0 ) #define CFG_ENFORCE_COUNTRY_CODE_MATCH_MAX ( 1 ) #define CFG_ENFORCE_COUNTRY_CODE_MATCH_DEFAULT ( 0 ) #define CFG_ENFORCE_DEFAULT_DOMAIN_NAME "gEnforceDefaultDomain" #define CFG_ENFORCE_DEFAULT_DOMAIN_MIN ( 0 ) #define CFG_ENFORCE_DEFAULT_DOMAIN_MAX ( 1 ) #define CFG_ENFORCE_DEFAULT_DOMAIN_DEFAULT ( 0 ) #define CFG_GENERIC_ID1_NAME "gCfg1Id" #define CFG_GENERIC_ID1_MIN ( 0 ) #define CFG_GENERIC_ID1_MAX ( 0xffffffff ) #define CFG_GENERIC_ID1_DEFAULT ( 0 ) #define CFG_GENERIC_ID2_NAME "gCfg2Id" #define CFG_GENERIC_ID2_MIN ( 0 ) #define CFG_GENERIC_ID2_MAX ( 0xffffffff ) #define CFG_GENERIC_ID2_DEFAULT ( 0 ) #define CFG_GENERIC_ID3_NAME "gCfg3Id" #define CFG_GENERIC_ID3_MIN ( 0 ) #define CFG_GENERIC_ID3_MAX ( 0xffffffff ) #define CFG_GENERIC_ID3_DEFAULT ( 0 ) #define CFG_GENERIC_ID4_NAME "gCfg4Id" #define CFG_GENERIC_ID4_MIN ( 0 ) #define CFG_GENERIC_ID4_MAX ( 0xffffffff ) #define CFG_GENERIC_ID4_DEFAULT ( 0 ) #define CFG_GENERIC_ID5_NAME "gCfg5Id" #define CFG_GENERIC_ID5_MIN ( 0 ) #define CFG_GENERIC_ID5_MAX ( 0xffffffff ) #define CFG_GENERIC_ID5_DEFAULT ( 0 ) #define CFG_GENERIC_VALUE1_NAME "gCfg1Value" #define CFG_GENERIC_VALUE1_MIN ( 0 ) #define CFG_GENERIC_VALUE1_MAX ( 0xffffffff ) #define CFG_GENERIC_VALUE1_DEFAULT ( 0 ) #define CFG_GENERIC_VALUE2_NAME "gCfg2Value" #define CFG_GENERIC_VALUE2_MIN ( 0 ) #define CFG_GENERIC_VALUE2_MAX ( 0xffffffff ) #define CFG_GENERIC_VALUE2_DEFAULT ( 0 ) #define CFG_GENERIC_VALUE3_NAME "gCfg3Value" #define CFG_GENERIC_VALUE3_MIN ( 0 ) #define CFG_GENERIC_VALUE3_MAX ( 0xffffffff ) #define CFG_GENERIC_VALUE3_DEFAULT ( 0 ) #define CFG_GENERIC_VALUE4_NAME "gCfg4Value" #define CFG_GENERIC_VALUE4_MIN ( 0 ) #define CFG_GENERIC_VALUE4_MAX ( 0xffffffff ) #define CFG_GENERIC_VALUE4_DEFAULT ( 0 ) #define CFG_GENERIC_VALUE5_NAME "gCfg5Value" #define CFG_GENERIC_VALUE5_MIN ( 0 ) #define CFG_GENERIC_VALUE5_MAX ( 0xffffffff ) #define CFG_GENERIC_VALUE5_DEFAULT ( 0 ) #define CFG_HEARTBEAT_THRESH_24_NAME "gHeartbeat24" #define CFG_HEARTBEAT_THRESH_24_MIN WNI_CFG_HEART_BEAT_THRESHOLD_STAMIN #define CFG_HEARTBEAT_THRESH_24_MAX WNI_CFG_HEART_BEAT_THRESHOLD_STAMAX #define CFG_HEARTBEAT_THRESH_24_DEFAULT WNI_CFG_HEART_BEAT_THRESHOLD_STADEF #define CFG_POWER_USAGE_NAME "gPowerUsage" #define CFG_POWER_USAGE_MIN "Min" //Minimum Power Save #define CFG_POWER_USAGE_MAX "Max" //Maximum Power Save #define CFG_POWER_USAGE_DEFAULT "Mod" //Moderate Power Save //Enable suspend on Android #define CFG_ENABLE_SUSPEND_NAME "gEnableSuspend" #define CFG_ENABLE_SUSPEND_MIN ( 0 ) //No support for suspend #define CFG_ENABLE_SUSPEND_MAX ( 3 ) //Map to Deep Sleep #define CFG_ENABLE_SUSPEND_DEFAULT ( 1 ) //Map to Standby //Driver start/stop command mappings #define CFG_ENABLE_ENABLE_DRIVER_STOP_NAME "gEnableDriverStop" #define CFG_ENABLE_ENABLE_DRIVER_STOP_MIN ( 0 ) //No support for stop #define CFG_ENABLE_ENABLE_DRIVER_STOP_MAX ( 2 ) //Map to Deep Sleep #define CFG_ENABLE_ENABLE_DRIVER_STOP_DEFAULT ( 0 ) #define CFG_WOWL_PATTERN_NAME "gWowlPattern" #define CFG_WOWL_PATTERN_DEFAULT "" //IMPS = IdleModePowerSave #define CFG_ENABLE_IMPS_NAME "gEnableImps" #define CFG_ENABLE_IMPS_MIN ( 0 ) #define CFG_ENABLE_IMPS_MAX ( 1 ) #define CFG_ENABLE_IMPS_DEFAULT ( 1 ) //SSR = SubSytemRestart #define CFG_SSR_PANIC_ON_FAILURE_NAME "gSsrPanicOnFailure" #define CFG_SSR_PANIC_ON_FAILURE_MIN ( 0 ) #define CFG_SSR_PANIC_ON_FAILURE_MAX ( 1 ) #define CFG_SSR_PANIC_ON_FAILURE_DEFAULT ( 0 ) #define CFG_IMPS_MINIMUM_SLEEP_TIME_NAME "gImpsMinSleepTime" #define CFG_IMPS_MINIMUM_SLEEP_TIME_MIN ( 0 ) #define CFG_IMPS_MINIMUM_SLEEP_TIME_MAX ( 65535 ) #define CFG_IMPS_MINIMUM_SLEEP_TIME_DEFAULT ( 5 ) #define CFG_IMPS_MODERATE_SLEEP_TIME_NAME "gImpsModSleepTime" #define CFG_IMPS_MODERATE_SLEEP_TIME_MIN ( 0 ) #define CFG_IMPS_MODERATE_SLEEP_TIME_MAX ( 65535 ) #define CFG_IMPS_MODERATE_SLEEP_TIME_DEFAULT ( 10) #define CFG_IMPS_MAXIMUM_SLEEP_TIME_NAME "gImpsMaxSleepTime" #define CFG_IMPS_MAXIMUM_SLEEP_TIME_MIN ( 0 ) #define CFG_IMPS_MAXIMUM_SLEEP_TIME_MAX ( 65535 ) #define CFG_IMPS_MAXIMUM_SLEEP_TIME_DEFAULT ( 15 ) /*If there is scan on STA interface back to back with *time diff nDeferScanTimeInterval, driver will not *issue a new scan. Driver will return cached result to kernel. *the interval is in msec */ #define CFG_DEFER_SCAN_TIME_INTERVAL "gDeferScanTimeInterval" #define CFG_DEFER_SCAN_TIME_INTERVAL_MIN ( 0 ) #define CFG_DEFER_SCAN_TIME_INTERVAL_MAX ( 65535 ) #define CFG_DEFER_SCAN_TIME_INTERVAL_DEFAULT ( 2000 ) //BMPS = BeaconModePowerSave #define CFG_ENABLE_BMPS_NAME "gEnableBmps" #define CFG_ENABLE_BMPS_MIN ( 0 ) #define CFG_ENABLE_BMPS_MAX ( 1 ) #define CFG_ENABLE_BMPS_DEFAULT ( 1 ) #define CFG_BMPS_MINIMUM_LI_NAME "gBmpsMinListenInterval" #define CFG_BMPS_MINIMUM_LI_MIN ( 1 ) #define CFG_BMPS_MINIMUM_LI_MAX ( 65535 ) #define CFG_BMPS_MINIMUM_LI_DEFAULT ( 1 ) #define CFG_BMPS_MODERATE_LI_NAME "gBmpsModListenInterval" #define CFG_BMPS_MODERATE_LI_MIN ( 1 ) #define CFG_BMPS_MODERATE_LI_MAX ( 65535 ) #define CFG_BMPS_MODERATE_LI_DEFAULT ( 1 ) #define CFG_BMPS_MAXIMUM_LI_NAME "gBmpsMaxListenInterval" #define CFG_BMPS_MAXIMUM_LI_MIN ( 1 ) #define CFG_BMPS_MAXIMUM_LI_MAX ( 65535 ) #define CFG_BMPS_MAXIMUM_LI_DEFAULT ( 1 ) // gEnableAutoBmpsTimer has been previously published as an externally // configurable parameter. See analysis of CR 178211 for detailed info // on why we want to *always* set this to 1 i.e. we no longer want // this parameter to be configurable. the clean solution would be for // users to not define this item in winreg so that the default value // (which needs to be changed to 1) gets picked up but we cannot rely on that // since this item has been published already hence the proposed // solution to change the name of the item along with the change in the // default value. also we could decide to not read this item from registry // but leaving open the option of being able to configure this item for // ASW's internal use #define CFG_ENABLE_AUTO_BMPS_TIMER_NAME "gEnableAutoBmpsTimer_INTERNAL" #define CFG_ENABLE_AUTO_BMPS_TIMER_MIN ( 0 ) #define CFG_ENABLE_AUTO_BMPS_TIMER_MAX ( 1 ) #define CFG_ENABLE_AUTO_BMPS_TIMER_DEFAULT ( 1 ) /* * gEnableDynamicRAstartRate usage: * * 11B and 11A/G rates can be specified in multiples of 0.5 * So for 5.5 mbps, gEnableDynamicRAstartRate=11 * and for 12 mbps, gEnableDynamicRAstartRate=24 etc. * * for MCS 0 - 7 rates, Bit 7 should set to 1 and Bit 0-6 * represent the MCS index. * So for MCS0, gEnableDynamicRAstartRate=128 * and for MCS2, gEnableDynamicRAstartRate=130 etc. * * Any invalid non-zero value will set the start rate * to 6 mbps (value 1 will also set it to 6 mbps) * * Bit 8 is used to enable PER discount logic in RA * Ex: if PER discount logic needs to be enabled along with * RA start rate as 6mbps: * (Bit 8 for PER discount logic and Bit 0 for 6 mbps) * gEnableDynamicRAstartRate=257 */ #define CFG_ENABLE_DYNAMIC_RA_START_RATE_NAME "gEnableDynamicRAstartRate" #define CFG_ENABLE_DYNAMIC_RA_START_RATE_MIN (0) #define CFG_ENABLE_DYNAMIC_RA_START_RATE_MAX (65535) #define CFG_ENABLE_DYNAMIC_RA_START_RATE_DEFAULT (0) /* * gEnableRTTsupport * * @Min: 0 - Disabled * @Max: 1 - Enabled * @Default: 1 - Enabled * * The param is used to enable/disable support for RTT */ #define CFG_ENABLE_RTT_SUPPORT "gEnableRTTSupport" #define CFG_ENABLE_RTT_SUPPORT_DEFAULT (1) #define CFG_ENABLE_RTT_SUPPORT_MIN (0) #define CFG_ENABLE_RTT_SUPPORT_MAX (1) /* Bit mask value to enable RTS/CTS for different modes * for 2.4 GHz, HT20 - 0x0001, for 2.4 GHz, HT40 - 0x0002 * for 2.4 GHz, VHT20 - 0x0004, for 2.4 GHz, VHT40 - 0x0008 * for 5 GHz, HT20 - 0x0100, for 5 GHz, HT40 - 0x0200 * for 5 GHz, VHT20 - 0x0400, for 5 GHz, VHT40 - 0x0800 * for 5 GHz, VHT80 - 0x1000 */ #define CFG_ENABLE_RTSCTS_HTVHT_NAME "gEnableRtsCtsHtVht" #define CFG_ENABLE_RTSCTS_HTVHT_MIN ( 0x0000 ) #define CFG_ENABLE_RTSCTS_HTVHT_MAX ( 0x1f0f ) #define CFG_ENABLE_RTSCTS_HTVHT_DEFAULT ( 0x0000 ) #define CFG_AUTO_BMPS_TIMER_VALUE_NAME "gAutoBmpsTimerValue" #define CFG_AUTO_BMPS_TIMER_VALUE_MIN ( 1000 ) #define CFG_AUTO_BMPS_TIMER_VALUE_MAX ( 4294967295UL ) #define CFG_AUTO_BMPS_TIMER_VALUE_DEFAULT ( 1000 ) #define CFG_MAX_RX_AMPDU_FACTOR_NAME "gMaxRxAmpduFactor" #define CFG_MAX_RX_AMPDU_FACTOR_MIN WNI_CFG_MAX_RX_AMPDU_FACTOR_STAMIN #define CFG_MAX_RX_AMPDU_FACTOR_MAX WNI_CFG_MAX_RX_AMPDU_FACTOR_STAMAX #define CFG_MAX_RX_AMPDU_FACTOR_DEFAULT WNI_CFG_MAX_RX_AMPDU_FACTOR_STADEF //Configuration added to enable/disable CTS2SELF in //Adaptive RX drain feature #define CFG_ENABLE_ADAPT_RX_DRAIN_NAME "gEnableAdaptRxDrain" #define CFG_ENABLE_ADAPT_RX_DRAIN_MIN WNI_CFG_ENABLE_ADAPT_RX_DRAIN_STAMIN #define CFG_ENABLE_ADAPT_RX_DRAIN_MAX WNI_CFG_ENABLE_ADAPT_RX_DRAIN_STAMAX #define CFG_ENABLE_ADAPT_RX_DRAIN_DEFAULT WNI_CFG_ENABLE_ADAPT_RX_DRAIN_STADEF typedef enum { eHDD_DOT11_MODE_AUTO = 0, //covers all things we support eHDD_DOT11_MODE_abg, //11a/b/g only, no HT, no proprietary eHDD_DOT11_MODE_11b, eHDD_DOT11_MODE_11g, eHDD_DOT11_MODE_11n, eHDD_DOT11_MODE_11g_ONLY, eHDD_DOT11_MODE_11n_ONLY, eHDD_DOT11_MODE_11b_ONLY, #ifdef WLAN_FEATURE_11AC eHDD_DOT11_MODE_11ac_ONLY, eHDD_DOT11_MODE_11ac, #endif }eHddDot11Mode; #define CFG_DOT11_MODE_NAME "gDot11Mode" #define CFG_DOT11_MODE_MIN eHDD_DOT11_MODE_AUTO #ifdef WLAN_FEATURE_11AC #define CFG_DOT11_MODE_MAX eHDD_DOT11_MODE_11ac #define CFG_DOT11_MODE_DEFAULT eHDD_DOT11_MODE_11ac #else #define CFG_DOT11_MODE_MAX eHDD_DOT11_MODE_11b_ONLY #define CFG_DOT11_MODE_DEFAULT eHDD_DOT11_MODE_11n #endif #define CFG_SAP_ENABLE_11AC_NAME "gSapEnable11AC" #define CFG_SAP_ENABLE_11AC_MIN ( 0 ) #define CFG_SAP_ENABLE_11AC_MAX ( 1 ) #define CFG_SAP_ENABLE_11AC_DEFAULT ( 1 ) #define CFG_CHANNEL_BONDING_MODE_24GHZ_NAME "gChannelBondingMode24GHz" #define CFG_CHANNEL_BONDING_MODE_MIN WNI_CFG_CHANNEL_BONDING_MODE_STAMIN #define CFG_CHANNEL_BONDING_MODE_MAX WNI_CFG_CHANNEL_BONDING_MODE_STAMAX #define CFG_CHANNEL_BONDING_MODE_DEFAULT WNI_CFG_CHANNEL_BONDING_MODE_STADEF #define CFG_OVERRIDE_HT40_20_24GHZ_NAME "override_ht20_40_24g" #define CFG_OVERRIDE_HT40_20_24GHZ_MIN 0 #define CFG_OVERRIDE_HT40_20_24GHZ_MAX 1 #define CFG_OVERRIDE_HT40_20_24GHZ_DEFAULT 0 #define CFG_CHANNEL_BONDING_MODE_5GHZ_NAME "gChannelBondingMode5GHz" #define CFG_CHANNEL_BONDING_MODE_MIN WNI_CFG_CHANNEL_BONDING_MODE_STAMIN #define CFG_CHANNEL_BONDING_MODE_MAX WNI_CFG_CHANNEL_BONDING_MODE_STAMAX #define CFG_CHANNEL_BONDING_MODE_DEFAULT WNI_CFG_CHANNEL_BONDING_MODE_STADEF #define CFG_FIXED_RATE_NAME "gFixedRate" #define CFG_FIXED_RATE_MIN WNI_CFG_FIXED_RATE_STAMIN #define CFG_FIXED_RATE_MAX WNI_CFG_FIXED_RATE_STAMAX #define CFG_FIXED_RATE_DEFAULT WNI_CFG_FIXED_RATE_STADEF #define CFG_SHORT_GI_20MHZ_NAME "gShortGI20Mhz" #define CFG_SHORT_GI_20MHZ_MIN WNI_CFG_SHORT_GI_20MHZ_STAMIN #define CFG_SHORT_GI_20MHZ_MAX WNI_CFG_SHORT_GI_20MHZ_STAMAX #define CFG_SHORT_GI_20MHZ_DEFAULT WNI_CFG_SHORT_GI_20MHZ_STADEF #define CFG_BLOCK_ACK_AUTO_SETUP_NAME "gBlockAckAutoSetup" #define CFG_BLOCK_ACK_AUTO_SETUP_MIN ( 0 ) #define CFG_BLOCK_ACK_AUTO_SETUP_MAX ( 1 ) #define CFG_BLOCK_ACK_AUTO_SETUP_DEFAULT ( 1 ) #define CFG_SCAN_RESULT_AGE_COUNT_NAME "gScanResultAgeCount" #define CFG_SCAN_RESULT_AGE_COUNT_MIN ( 1 ) #define CFG_SCAN_RESULT_AGE_COUNT_MAX ( 100 ) #define CFG_SCAN_RESULT_AGE_COUNT_DEFAULT ( 3 ) //All in seconds //Not Connect, No Power Save #define CFG_SCAN_RESULT_AGE_TIME_NCNPS_NAME "gScanResultAgeNCNPS" #define CFG_SCAN_RESULT_AGE_TIME_NCNPS_MIN ( 10 ) #define CFG_SCAN_RESULT_AGE_TIME_NCNPS_MAX ( 10000 ) #define CFG_SCAN_RESULT_AGE_TIME_NCNPS_DEFAULT ( 50 ) //Not Connect, Power Save #define CFG_SCAN_RESULT_AGE_TIME_NCPS_NAME "gScanResultAgeNCPS" #define CFG_SCAN_RESULT_AGE_TIME_NCPS_MIN ( 10 ) #define CFG_SCAN_RESULT_AGE_TIME_NCPS_MAX ( 10000 ) #define CFG_SCAN_RESULT_AGE_TIME_NCPS_DEFAULT ( 300 ) //Connect, No Power Save #define CFG_SCAN_RESULT_AGE_TIME_CNPS_NAME "gScanResultAgeCNPS" #define CFG_SCAN_RESULT_AGE_TIME_CNPS_MIN ( 10 ) #define CFG_SCAN_RESULT_AGE_TIME_CNPS_MAX ( 10000 ) #define CFG_SCAN_RESULT_AGE_TIME_CNPS_DEFAULT ( 150 ) //Connect, Power Save #define CFG_SCAN_RESULT_AGE_TIME_CPS_NAME "gScanResultAgeCPS" #define CFG_SCAN_RESULT_AGE_TIME_CPS_MIN ( 10 ) #define CFG_SCAN_RESULT_AGE_TIME_CPS_MAX ( 10000 ) #define CFG_SCAN_RESULT_AGE_TIME_CPS_DEFAULT ( 600 ) #define CFG_RSSI_CATEGORY_GAP_NAME "gRssiCatGap" #define CFG_RSSI_CATEGORY_GAP_MIN ( 5 ) #define CFG_RSSI_CATEGORY_GAP_MAX ( 100 ) #define CFG_RSSI_CATEGORY_GAP_DEFAULT ( 5 ) #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) #define CFG_ROAM_PREFER_5GHZ "gRoamPrefer5GHz" #define CFG_ROAM_PREFER_5GHZ_MIN ( 0 ) #define CFG_ROAM_PREFER_5GHZ_MAX ( 1 ) #define CFG_ROAM_PREFER_5GHZ_DEFAULT ( 1 ) /* To enable, set gRoamIntraBand=1 (Roaming within band) To disable, set gRoamIntraBand=0 (Roaming across band) */ #define CFG_ROAM_INTRA_BAND "gRoamIntraBand" #define CFG_ROAM_INTRA_BAND_MIN ( 0 ) #define CFG_ROAM_INTRA_BAND_MAX ( 1 ) #define CFG_ROAM_INTRA_BAND_DEFAULT ( 0 ) #endif #define CFG_SHORT_PREAMBLE_NAME "gShortPreamble" #define CFG_SHORT_PREAMBLE_MIN WNI_CFG_SHORT_PREAMBLE_STAMIN #define CFG_SHORT_PREAMBLE_MAX WNI_CFG_SHORT_PREAMBLE_STAMAX #define CFG_SHORT_PREAMBLE_DEFAULT WNI_CFG_SHORT_PREAMBLE_STADEF #define CFG_IBSS_AUTO_BSSID_NAME "gAutoIbssBssid" #define CFG_IBSS_AUTO_BSSID_MIN WNI_CFG_IBSS_AUTO_BSSID_STAMIN #define CFG_IBSS_AUTO_BSSID_MAX WNI_CFG_IBSS_AUTO_BSSID_STAMAX #define CFG_IBSS_AUTO_BSSID_DEFAULT WNI_CFG_IBSS_AUTO_BSSID_STADEF #define CFG_IBSS_BSSID_NAME "gIbssBssid" #define CFG_IBSS_BSSID_MIN "000000000000" #define CFG_IBSS_BSSID_MAX "ffffffffffff" #define CFG_IBSS_BSSID_DEFAULT "000AF5040506" #define CFG_INTF0_MAC_ADDR_NAME "Intf0MacAddress" #define CFG_INTF0_MAC_ADDR_MIN "000000000000" #define CFG_INTF0_MAC_ADDR_MAX "ffffffffffff" #define CFG_INTF0_MAC_ADDR_DEFAULT "000AF5898980" #define CFG_INTF1_MAC_ADDR_NAME "Intf1MacAddress" #define CFG_INTF1_MAC_ADDR_MIN "000000000000" #define CFG_INTF1_MAC_ADDR_MAX "ffffffffffff" #define CFG_INTF1_MAC_ADDR_DEFAULT "000AF5898981" #define CFG_INTF2_MAC_ADDR_NAME "Intf2MacAddress" #define CFG_INTF2_MAC_ADDR_MIN "000000000000" #define CFG_INTF2_MAC_ADDR_MAX "ffffffffffff" #define CFG_INTF2_MAC_ADDR_DEFAULT "000AF5898982" #define CFG_INTF3_MAC_ADDR_NAME "Intf3MacAddress" #define CFG_INTF3_MAC_ADDR_MIN "000000000000" #define CFG_INTF3_MAC_ADDR_MAX "ffffffffffff" #define CFG_INTF3_MAC_ADDR_DEFAULT "000AF5898983" #define CFG_AP_QOS_UAPSD_MODE_NAME "gEnableApUapsd" // ACs to setup U-APSD for at assoc #define CFG_AP_QOS_UAPSD_MODE_MIN ( 0 ) #define CFG_AP_QOS_UAPSD_MODE_MAX ( 1 ) #define CFG_AP_QOS_UAPSD_MODE_DEFAULT ( 1 ) #define CFG_AP_COUNTRY_CODE "gAPCntryCode" #define CFG_AP_COUNTRY_CODE_MIN "USI" #define CFG_AP_COUNTRY_CODE_MAX "USI" #define CFG_AP_COUNTRY_CODE_DEFAULT "FFF" #define CFG_AP_ENABLE_RANDOM_BSSID_NAME "gEnableApRandomBssid" #define CFG_AP_ENABLE_RANDOM_BSSID_MIN ( 0 ) #define CFG_AP_ENABLE_RANDOM_BSSID_MAX ( 1 ) #define CFG_AP_ENABLE_RANDOM_BSSID_DEFAULT ( 0 ) #define CFG_AP_ENABLE_PROTECTION_MODE_NAME "gEnableApProt" #define CFG_AP_ENABLE_PROTECTION_MODE_MIN ( 0 ) #define CFG_AP_ENABLE_PROTECTION_MODE_MAX ( 1 ) #define CFG_AP_ENABLE_PROTECTION_MODE_DEFAULT ( 1 ) // Bit map for CFG_AP_PROTECTION_MODE_DEFAULT // LOWER byte for associated stations // UPPER byte for overlapping stations // each byte will have the following info // bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8 // OBSS RIFS LSIG_TXOP NON_GF HT20 FROM_11G FROM_11B FROM_11A // bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 // OBSS RIFS LSIG_TXOP NON_GF HT_20 FROM_11G FROM_11B FROM_11A #define CFG_AP_PROTECTION_MODE_NAME "gApProtection" #define CFG_AP_PROTECTION_MODE_MIN ( 0x0 ) #define CFG_AP_PROTECTION_MODE_MAX ( 0xFFFF ) #define CFG_AP_PROTECTION_MODE_DEFAULT ( 0xBFFF ) #define CFG_AP_OBSS_PROTECTION_MODE_NAME "gEnableApOBSSProt" #define CFG_AP_OBSS_PROTECTION_MODE_MIN ( 0 ) #define CFG_AP_OBSS_PROTECTION_MODE_MAX ( 1 ) #define CFG_AP_OBSS_PROTECTION_MODE_DEFAULT ( 0 ) #define CFG_AP_STA_SECURITY_SEPERATION_NAME "gDisableIntraBssFwd" #define CFG_AP_STA_SECURITY_SEPERATION_MIN ( 0 ) #define CFG_AP_STA_SECURITY_SEPERATION_MAX ( 1 ) #define CFG_AP_STA_SECURITY_SEPERATION_DEFAULT ( 0 ) #define CFG_AP_LISTEN_MODE_NAME "gEnablePhyAgcListenMode" #define CFG_AP_LISTEN_MODE_MIN (0) #define CFG_AP_LISTEN_MODE_MAX (128) #define CFG_AP_LISTEN_MODE_DEFAULT (128) #define CFG_AP_AUTO_SHUT_OFF "gAPAutoShutOff" #define CFG_AP_AUTO_SHUT_OFF_MIN ( 0 ) #define CFG_AP_AUTO_SHUT_OFF_MAX ( 4294967295UL ) #define CFG_AP_AUTO_SHUT_OFF_DEFAULT ( 0 ) #define CFG_FRAMES_PROCESSING_TH_MODE_NAME "gMinFramesProcThres" #define CFG_FRAMES_PROCESSING_TH_MIN ( 0 ) #define CFG_FRAMES_PROCESSING_TH_MAX ( 39 ) #define CFG_FRAMES_PROCESSING_TH_DEFAULT ( 0 ) #define CFG_SAP_CHANNEL_SELECT_START_CHANNEL "gAPChannelSelectStartChannel" #define CFG_SAP_CHANNEL_SELECT_START_CHANNEL_MIN (0) #define CFG_SAP_CHANNEL_SELECT_START_CHANNEL_MAX (0xFF) #define CFG_SAP_CHANNEL_SELECT_START_CHANNEL_DEFAULT (0) #define CFG_SAP_CHANNEL_SELECT_END_CHANNEL "gAPChannelSelectEndChannel" #define CFG_SAP_CHANNEL_SELECT_END_CHANNEL_MIN (0) #define CFG_SAP_CHANNEL_SELECT_END_CHANNEL_MAX (0xFF) #define CFG_SAP_CHANNEL_SELECT_END_CHANNEL_DEFAULT (11) #define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND "gAPChannelSelectOperatingBand" #define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND_MIN (0) #define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND_MAX (0x5) #define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND_DEFAULT (0) #define CFG_DISABLE_PACKET_FILTER "gDisablePacketFilter" #define CFG_DISABLE_PACKET_FILTER_MIN (0) #define CFG_DISABLE_PACKET_FILTER_MAX (0x1) #define CFG_DISABLE_PACKET_FILTER_DEFAULT (0) #define CFG_ENABLE_LTE_COEX "gEnableLTECoex" #define CFG_ENABLE_LTE_COEX_MIN ( 0 ) #define CFG_ENABLE_LTE_COEX_MAX ( 1 ) #define CFG_ENABLE_LTE_COEX_DEFAULT ( 0 ) #define CFG_AP_KEEP_ALIVE_PERIOD_NAME "gApKeepAlivePeriod" #define CFG_AP_KEEP_ALIVE_PERIOD_MIN ( 3 ) #define CFG_AP_KEEP_ALIVE_PERIOD_MAX ( 255 ) #define CFG_AP_KEEP_ALIVE_PERIOD_DEFAULT ( 5 ) #define CFG_GO_KEEP_ALIVE_PERIOD_NAME "gGoKeepAlivePeriod" #define CFG_GO_KEEP_ALIVE_PERIOD_MIN ( 3 ) #define CFG_GO_KEEP_ALIVE_PERIOD_MAX ( 255 ) #define CFG_GO_KEEP_ALIVE_PERIOD_DEFAULT ( 5 ) #define CFG_AP_LINK_MONITOR_PERIOD_NAME "gApLinkMonitorPeriod" #define CFG_AP_LINK_MONITOR_PERIOD_MIN ( 3 ) #define CFG_AP_LINK_MONITOR_PERIOD_MAX ( 50 ) #define CFG_AP_LINK_MONITOR_PERIOD_DEFAULT ( 10 ) /* gGoLinkMonitorPeriod is period where link is idle and where * we send NULL frame */ #define CFG_GO_LINK_MONITOR_PERIOD_NAME "gGoLinkMonitorPeriod" #define CFG_GO_LINK_MONITOR_PERIOD_MIN ( 3 ) #define CFG_GO_LINK_MONITOR_PERIOD_MAX ( 50 ) #define CFG_GO_LINK_MONITOR_PERIOD_DEFAULT ( 10 ) #define CFG_BEACON_INTERVAL_NAME "gBeaconInterval" #define CFG_BEACON_INTERVAL_MIN WNI_CFG_BEACON_INTERVAL_STAMIN #define CFG_BEACON_INTERVAL_MAX WNI_CFG_BEACON_INTERVAL_STAMAX #define CFG_BEACON_INTERVAL_DEFAULT WNI_CFG_BEACON_INTERVAL_STADEF //Additional Handoff related Parameters #define CFG_ENABLE_IDLE_SCAN_NAME "gEnableIdleScan" #define CFG_ENABLE_IDLE_SCAN_MIN ( 0 ) #define CFG_ENABLE_IDLE_SCAN_MAX ( 1 ) #define CFG_ENABLE_IDLE_SCAN_DEFAULT ( 1 ) #define CFG_ROAMING_TIME_NAME "gRoamingTime" #define CFG_ROAMING_TIME_MIN ( 0 ) #define CFG_ROAMING_TIME_MAX ( 4294967UL ) #define CFG_ROAMING_TIME_DEFAULT ( 10 ) #define CFG_VCC_RSSI_TRIGGER_NAME "gVccRssiTrigger" #define CFG_VCC_RSSI_TRIGGER_MIN ( 0 ) #define CFG_VCC_RSSI_TRIGGER_MAX ( 80 ) #define CFG_VCC_RSSI_TRIGGER_DEFAULT ( 80 ) #define CFG_VCC_UL_MAC_LOSS_THRESH_NAME "gVccUlMacLossThresh" #define CFG_VCC_UL_MAC_LOSS_THRESH_MIN ( 0 ) #define CFG_VCC_UL_MAC_LOSS_THRESH_MAX ( 9 ) #define CFG_VCC_UL_MAC_LOSS_THRESH_DEFAULT ( 9 ) #define CFG_PASSIVE_MAX_CHANNEL_TIME_NAME "gPassiveMaxChannelTime" #define CFG_PASSIVE_MAX_CHANNEL_TIME_MIN ( 0 ) #define CFG_PASSIVE_MAX_CHANNEL_TIME_MAX ( 10000 ) #define CFG_PASSIVE_MAX_CHANNEL_TIME_DEFAULT ( 110 ) #define CFG_PASSIVE_MIN_CHANNEL_TIME_NAME "gPassiveMinChannelTime" #define CFG_PASSIVE_MIN_CHANNEL_TIME_MIN ( 0 ) #define CFG_PASSIVE_MIN_CHANNEL_TIME_MAX ( 10000 ) #define CFG_PASSIVE_MIN_CHANNEL_TIME_DEFAULT ( 60 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_NAME "gActiveMaxChannelTime" #define CFG_ACTIVE_MAX_CHANNEL_TIME_MIN ( 0 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_MAX ( 10000 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_DEFAULT ( 50 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_NAME "gActiveMinChannelTime" #define CFG_ACTIVE_MIN_CHANNEL_TIME_MIN ( 0 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_MAX ( 10000 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_DEFAULT ( 30 ) /* Max Dwell time during BTC eSCO call in msec*/ #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_NAME "gActiveMaxChannelTimeBtc" #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_MIN ( 0 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_MAX ( 10000 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_DEFAULT ( 120 ) /* Min Dwell time during BTC eSCO call in msec*/ #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_NAME "gActiveMinChannelTimeBtc" #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_MIN ( 0 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_MAX ( 10000 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_DEFAULT ( 60 ) /* Min Dwell time during BTC SCO call in msec*/ #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_NAME "gActiveMinChannelTimeBtcSCO" #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_MIN (0) #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_MAX (10000) #define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_DEFAULT (20) /* Max Dwell time during BTC SCO call in msec*/ #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_NAME "gActiveMaxChannelTimeBtcSCO" #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_MIN (0) #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_MAX (10000) #define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_DEFAULT (40) #define CFG_RETRY_LIMIT_ZERO_NAME "gRetryLimitZero" #define CFG_RETRY_LIMIT_ZERO_MIN ( 0 ) #define CFG_RETRY_LIMIT_ZERO_MAX ( 15 ) #define CFG_RETRY_LIMIT_ZERO_DEFAULT ( 5 ) #define CFG_RETRY_LIMIT_ONE_NAME "gRetryLimitOne" #define CFG_RETRY_LIMIT_ONE_MIN ( 0 ) #define CFG_RETRY_LIMIT_ONE_MAX ( 15 ) #define CFG_RETRY_LIMIT_ONE_DEFAULT ( 10 ) #define CFG_RETRY_LIMIT_TWO_NAME "gRetryLimitTwo" #define CFG_RETRY_LIMIT_TWO_MIN ( 0 ) #define CFG_RETRY_LIMIT_TWO_MAX ( 15 ) #define CFG_RETRY_LIMIT_TWO_DEFAULT ( 15 ) #define CFG_DISABLE_AGG_WITH_BTC_NAME "gDisableAggWithBTC" #define CFG_DISABLE_AGG_WITH_BTC_MIN ( 0 ) #define CFG_DISABLE_AGG_WITH_BTC_MAX ( 1 ) #define CFG_DISABLE_AGG_WITH_BTC_DEFAULT ( 1 ) #ifdef WLAN_AP_STA_CONCURRENCY #define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_NAME "gPassiveMaxChannelTimeConc" #define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_MIN ( 0 ) #define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_MAX ( 10000 ) #define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_DEFAULT ( 110 ) #define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_NAME "gPassiveMinChannelTimeConc" #define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_MIN ( 0 ) #define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_MAX ( 10000 ) #define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_DEFAULT ( 60 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_NAME "gActiveMaxChannelTimeConc" #define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_MIN ( 0 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_MAX ( 10000 ) #define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_DEFAULT ( 40 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_NAME "gActiveMinChannelTimeConc" #define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_MIN ( 0 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_MAX ( 10000 ) #define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_DEFAULT ( 20 ) #define CFG_REST_TIME_CONC_NAME "gRestTimeConc" #define CFG_REST_TIME_CONC_MIN ( 0 ) #define CFG_REST_TIME_CONC_MAX ( 10000 ) #define CFG_REST_TIME_CONC_DEFAULT ( 100 ) #define CFG_NUM_STA_CHAN_COMBINED_CONC_NAME "gNumStaChanCombinedConc" #define CFG_NUM_STA_CHAN_COMBINED_CONC_MIN ( 1 ) #define CFG_NUM_STA_CHAN_COMBINED_CONC_MAX ( 255 ) #define CFG_NUM_STA_CHAN_COMBINED_CONC_DEFAULT ( 3 ) #define CFG_NUM_P2P_CHAN_COMBINED_CONC_NAME "gNumP2PChanCombinedConc" #define CFG_NUM_P2P_CHAN_COMBINED_CONC_MIN ( 1 ) #define CFG_NUM_P2P_CHAN_COMBINED_CONC_MAX ( 255 ) #define CFG_NUM_P2P_CHAN_COMBINED_CONC_DEFAULT ( 1 ) #endif #define CFG_MAX_PS_POLL_NAME "gMaxPsPoll" #define CFG_MAX_PS_POLL_MIN WNI_CFG_MAX_PS_POLL_STAMIN #define CFG_MAX_PS_POLL_MAX WNI_CFG_MAX_PS_POLL_STAMAX #define CFG_MAX_PS_POLL_DEFAULT WNI_CFG_MAX_PS_POLL_STADEF #define CFG_MAX_TX_POWER_NAME "gTxPowerCap" #define CFG_MAX_TX_POWER_MIN WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMIN #define CFG_MAX_TX_POWER_MAX WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMAX //Not to use CFG default because if no registry setting, this is ignored by SME. #define CFG_MAX_TX_POWER_DEFAULT WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMAX #define CFG_LOW_GAIN_OVERRIDE_NAME "gLowGainOverride" #define CFG_LOW_GAIN_OVERRIDE_MIN WNI_CFG_LOW_GAIN_OVERRIDE_STAMIN #define CFG_LOW_GAIN_OVERRIDE_MAX WNI_CFG_LOW_GAIN_OVERRIDE_STAMAX #define CFG_LOW_GAIN_OVERRIDE_DEFAULT WNI_CFG_LOW_GAIN_OVERRIDE_STADEF #define CFG_RSSI_FILTER_PERIOD_NAME "gRssiFilterPeriod" #define CFG_RSSI_FILTER_PERIOD_MIN WNI_CFG_RSSI_FILTER_PERIOD_STAMIN #define CFG_RSSI_FILTER_PERIOD_MAX WNI_CFG_RSSI_FILTER_PERIOD_STAMAX // Increased this value for Non-ESE AP. This is cause FW RSSI Monitoring // the consumer of this value is ON by default. So to impact power numbers // we are setting this to a high value. #define CFG_RSSI_FILTER_PERIOD_DEFAULT WNI_CFG_RSSI_FILTER_PERIOD_STADEF #define CFG_IGNORE_DTIM_NAME "gIgnoreDtim" #define CFG_IGNORE_DTIM_MIN WNI_CFG_IGNORE_DTIM_STAMIN #define CFG_IGNORE_DTIM_MAX WNI_CFG_IGNORE_DTIM_STAMAX #define CFG_IGNORE_DTIM_DEFAULT WNI_CFG_IGNORE_DTIM_STADEF #define CFG_MAX_LI_MODULATED_DTIM_NAME "gMaxLIModulatedDTIM" #define CFG_MAX_LI_MODULATED_DTIM_MIN ( 1 ) #define CFG_MAX_LI_MODULATED_DTIM_MAX ( 10 ) #define CFG_MAX_LI_MODULATED_DTIM_DEFAULT ( 10 ) #define CFG_RX_ANT_CONFIGURATION_NAME "gNumRxAnt" #define CFG_RX_ANT_CONFIGURATION_NAME_MIN ( 1 ) #define CFG_RX_ANT_CONFIGURATION_NAME_MAX ( 2 ) #define CFG_RX_ANT_CONFIGURATION_NAME_DEFAULT ( 2 ) #define CFG_FW_HEART_BEAT_MONITORING_NAME "gEnableFWHeartBeatMonitoring" #define CFG_FW_HEART_BEAT_MONITORING_MIN ( 0 ) #define CFG_FW_HEART_BEAT_MONITORING_MAX ( 1 ) #define CFG_FW_HEART_BEAT_MONITORING_DEFAULT ( 1 ) #define CFG_FW_BEACON_FILTERING_NAME "gEnableFWBeaconFiltering" #define CFG_FW_BEACON_FILTERING_MIN ( 0 ) #define CFG_FW_BEACON_FILTERING_MAX ( 1 ) #define CFG_FW_BEACON_FILTERING_DEFAULT ( 1 ) #define CFG_FW_RSSI_MONITORING_NAME "gEnableFWRssiMonitoring" #define CFG_FW_RSSI_MONITORING_MIN ( 0 ) #define CFG_FW_RSSI_MONITORING_MAX ( 1 ) #define CFG_FW_RSSI_MONITORING_DEFAULT ( 1 ) #define CFG_DATA_INACTIVITY_TIMEOUT_NAME "gDataInactivityTimeout" #define CFG_DATA_INACTIVITY_TIMEOUT_MIN ( 1 ) #define CFG_DATA_INACTIVITY_TIMEOUT_MAX ( 255 ) #define CFG_DATA_INACTIVITY_TIMEOUT_DEFAULT ( 20 ) #define CFG_NTH_BEACON_FILTER_NAME "gNthBeaconFilter" #define CFG_NTH_BEACON_FILTER_MIN ( WNI_CFG_NTH_BEACON_FILTER_STAMIN ) #define CFG_NTH_BEACON_FILTER_MAX ( WNI_CFG_NTH_BEACON_FILTER_STAMAX ) #define CFG_NTH_BEACON_FILTER_DEFAULT ( WNI_CFG_NTH_BEACON_FILTER_STADEF ) #define CFG_RF_SETTLING_TIME_CLK_NAME "rfSettlingTimeUs" #define CFG_RF_SETTLING_TIME_CLK_MIN ( 0 ) #define CFG_RF_SETTLING_TIME_CLK_MAX ( 60000 ) #define CFG_RF_SETTLING_TIME_CLK_DEFAULT ( 1500 ) #define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_NAME "gStaKeepAlivePeriod" #define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_MIN ( 0 ) #define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_MAX ( 65535) #define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_DEFAULT ( 30 ) //WMM configuration #define CFG_QOS_WMM_MODE_NAME "WmmIsEnabled" #define CFG_QOS_WMM_MODE_MIN (0) #define CFG_QOS_WMM_MODE_MAX (2) //HDD_WMM_NO_QOS #define CFG_QOS_WMM_MODE_DEFAULT (0) //HDD_WMM_AUTO #define CFG_QOS_WMM_80211E_ENABLED_NAME "80211eIsEnabled" #define CFG_QOS_WMM_80211E_ENABLED_MIN (0) #define CFG_QOS_WMM_80211E_ENABLED_MAX (1) #define CFG_QOS_WMM_80211E_ENABLED_DEFAULT (0) #define CFG_QOS_WMM_UAPSD_MASK_NAME "UapsdMask" // ACs to setup U-APSD for at assoc #define CFG_QOS_WMM_UAPSD_MASK_MIN (0x00) #define CFG_QOS_WMM_UAPSD_MASK_MAX (0xFF) #define CFG_QOS_WMM_UAPSD_MASK_DEFAULT (0xaa) #define CFG_QOS_WMM_UAPSD_MASK_DYMANIC_WMM_PS_DEFAULT (0x0) #define CFG_QOS_WMM_UAPSD_MASK_LEGACY_WMM_PS_DEFAULT (0x0) #define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_NAME "InfraUapsdVoSrvIntv" #define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_MAX (4294967295UL ) #define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_DEFAULT (20) #define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_NAME "InfraUapsdVoSuspIntv" #define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_MAX (4294967295UL ) #define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_DEFAULT (2000) #define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME "InfraUapsdViSrvIntv" #define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_DEFAULT (300) #define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME "InfraUapsdViSuspIntv" #define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_DEFAULT (2000) #define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME "InfraUapsdBeSrvIntv" #define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_DEFAULT (300) #define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME "InfraUapsdBeSuspIntv" #define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_DEFAULT (2000) #define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME "InfraUapsdBkSrvIntv" #define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_DEFAULT (300) #define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME "InfraUapsdBkSuspIntv" #define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_MIN (0) #define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_DEFAULT (2000) #ifdef FEATURE_WLAN_ESE #define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_NAME "InfraInactivityInterval" #define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_MIN (0) #define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_MAX (4294967295UL) #define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_DEFAULT (0) //disabled #define CFG_ESE_FEATURE_ENABLED_NAME "EseEnabled" #define CFG_ESE_FEATURE_ENABLED_MIN (0) #define CFG_ESE_FEATURE_ENABLED_MAX (1) #define CFG_ESE_FEATURE_ENABLED_DEFAULT (0) //disabled #endif // FEATURE_WLAN_ESE #ifdef FEATURE_WLAN_LFR #define CFG_LFR_FEATURE_ENABLED_NAME "FastRoamEnabled" #define CFG_LFR_FEATURE_ENABLED_MIN (0) #define CFG_LFR_FEATURE_ENABLED_MAX (1) #define CFG_LFR_FEATURE_ENABLED_DEFAULT (0) //disabled #define CFG_LFR_MAWC_FEATURE_ENABLED_NAME "MAWCEnabled" #define CFG_LFR_MAWC_FEATURE_ENABLED_MIN (0) #define CFG_LFR_MAWC_FEATURE_ENABLED_MAX (1) #define CFG_LFR_MAWC_FEATURE_ENABLED_DEFAULT (0) /* disabled */ #define CFG_PER_BSSID_BLACKLIST_TIMEOUT_NAME "gBssidBlacklistTimeOut" #define CFG_PER_BSSID_BLACKLIST_TIMEOUT_MIN (0) #define CFG_PER_BSSID_BLACKLIST_TIMEOUT_MAX (240) //Max timeout #define CFG_PER_BSSID_BLACKLIST_TIMEOUT_DEFAULT (0) #endif // FEATURE_WLAN_LFR #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) // This flag will control fasttransition in case of 11r and ESE. // Basically with this the whole neighbor roam, pre-auth, reassoc // can be turned ON/OFF. // With this turned OFF 11r will completely not work. // For 11r this flag has to be ON. // For ESE fastroam will not work. #define CFG_FAST_TRANSITION_ENABLED_NAME "FastTransitionEnabled" #define CFG_FAST_TRANSITION_ENABLED_NAME_MIN (0) #define CFG_FAST_TRANSITION_ENABLED_NAME_MAX (1) #define CFG_FAST_TRANSITION_ENABLED_NAME_DEFAULT (1) //Enabled /* This parameter is used to decide whether to Roam or not. * AP1 is the currently associated AP and AP2 is chosen for roaming. * The Roaming will happen only if AP2 has better Signal Quality and it has a RSSI better than AP1 * in terms of RoamRssiDiff,and RoamRssiDiff is the number of units (typically measured in dB) AP2 * is better than AP1. * This check is not done if the value is Zero */ #define CFG_ROAM_RSSI_DIFF_NAME "RoamRssiDiff" #define CFG_ROAM_RSSI_DIFF_MIN (0) #define CFG_ROAM_RSSI_DIFF_MAX (30) #define CFG_ROAM_RSSI_DIFF_DEFAULT (5) /* * Following a scan and if potential roam candidate(s) are found, * then determine whether to register for reassoc threshold or roam * immediately based on this configuration parameter. If the RSSI * of any available candidate is better than the currently associated * AP by at least gImmediateRoamRssiDiff, then being to roam * immediately. * NOTE: Value of 0 means that immediate roaming is enabled by default */ #define CFG_IMMEDIATE_ROAM_RSSI_DIFF_NAME "gImmediateRoamRssiDiff" #define CFG_IMMEDIATE_ROAM_RSSI_DIFF_MIN (0) #define CFG_IMMEDIATE_ROAM_RSSI_DIFF_MAX (125) #define CFG_IMMEDIATE_ROAM_RSSI_DIFF_DEFAULT (0) /*This parameter is used to set Wireless Extended Security Mode.*/ #define CFG_ENABLE_WES_MODE_NAME "gWESModeEnabled" #define CFG_ENABLE_WES_MODE_NAME_MIN (0) #define CFG_ENABLE_WES_MODE_NAME_MAX (1) #define CFG_ENABLE_WES_MODE_NAME_DEFAULT (0) #define CFG_ROAM_SCAN_N_PROBES "gRoamScanNProbes" #define CFG_ROAM_SCAN_N_PROBES_MIN (1) #define CFG_ROAM_SCAN_N_PROBES_MAX (10) #define CFG_ROAM_SCAN_N_PROBES_DEFAULT (2) #define CFG_ROAM_SCAN_HOME_AWAY_TIME "gRoamScanHomeAwayTime" #define CFG_ROAM_SCAN_HOME_AWAY_TIME_MIN (3) #define CFG_ROAM_SCAN_HOME_AWAY_TIME_MAX (300) #define CFG_ROAM_SCAN_HOME_AWAY_TIME_DEFAULT (CFG_ROAM_SCAN_HOME_AWAY_TIME_MIN) #endif /* (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) */ #ifdef FEATURE_WLAN_OKC #define CFG_OKC_FEATURE_ENABLED_NAME "OkcEnabled" #define CFG_OKC_FEATURE_ENABLED_MIN (0) #define CFG_OKC_FEATURE_ENABLED_MAX (1) #define CFG_OKC_FEATURE_ENABLED_DEFAULT (1) #endif #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD #define CFG_ROAM_SCAN_OFFLOAD_ENABLED "gRoamScanOffloadEnabled" #define CFG_ROAM_SCAN_OFFLOAD_ENABLED_MIN (0) #define CFG_ROAM_SCAN_OFFLOAD_ENABLED_MAX (1) #define CFG_ROAM_SCAN_OFFLOAD_ENABLED_DEFAULT (1) /* Enable/disable PER based roaming */ #define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED "gPERRoamEnable" #define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED_MIN (0) #define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED_MAX (1) #define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED_DEFAULT (0) /* * Rate at which to stop monitoring data rates for PER based Roam * Value: MBPS * 10 * Min: Minimum rate of data transfer * Max: Max rate for 1x1 transmission */ #define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD "gPERRoamUpThresholdRate" #define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD_MIN (20) #define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD_MAX (3330) #define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD_DEFAULT (400) /* * rate at which to start monitoring data rates for PER based roam * Value: MBPS * 10 */ #define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD "gPERRoamDownThresholdRate" #define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD_MIN (10) #define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD_MAX (3330) #define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD_DEFAULT (200) /* * time to wait before start monitoring again once a roam scan has been * triggered. (Minimum time difference between two scans) * Value : seconds */ #define CFG_PER_ROAM_SCAN_WAIT_TIME "gPERRoamScanInterval" #define CFG_PER_ROAM_SCAN_WAIT_TIME_MIN (10) #define CFG_PER_ROAM_SCAN_WAIT_TIME_MAX (3600) #define CFG_PER_ROAM_SCAN_WAIT_TIME_DEFAULT (300) /* Time to collect stats to trigger roam scan for Tx path */ #define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD "gPERRoamStatsTime" #define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD_MIN (5) #define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD_MAX (25) #define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD_DEFAULT (10) /* Rx monitoring is enabled to trigger a PER based roam scan */ #define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED "gPERRoamRxMonitorEnable" #define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED_MIN (0) #define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED_MAX (1) #define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED_DEFAULT (1) /* * Minimum number of packets required to consider if PER based roam scan * needs to be triggered in Rx */ #define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS "gPERRoamRxPktThreshold" #define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS_MIN (10) #define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS_MAX (10000) #define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS_DEFAULT (50) /* * Minimum percentage of packets needs to be below gPERRoamScanRateDownThreshold * to trigger a roam scan */ #define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE "gPERRoamTriggerPercent" #define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE_MIN (20) #define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE_MAX (100) #define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE_DEFAULT (60) /* Channel sensing is enabled/disabled for PER based roam scan */ #define CFG_PER_ROAM_SCAN_CCA_ENABLED "gPERRoamCCAEnabled" #define CFG_PER_ROAM_SCAN_CCA_ENABLED_MIN (0) #define CFG_PER_ROAM_SCAN_CCA_ENABLED_MAX (1) #define CFG_PER_ROAM_SCAN_CCA_ENABLED_DEFAULT (0) #define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD "gPERRoamFullScanRssiDiffThreshold" #define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD_MIN (5) #define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD_MAX (50) #define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD_DEFAULT (10) /* * Minimum RSSI value below which candidate will not be eligible for roam */ #define CFG_PER_ROAM_BAD_RSSI "gPERMinRssiThresholdForRoam" #define CFG_PER_ROAM_BAD_RSSI_MIN (-100) #define CFG_PER_ROAM_BAD_RSSI_MAX (-40) #define CFG_PER_ROAM_BAD_RSSI_DEFAULT (-80) #endif #define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_NAME "PktClassificationBasis" // DSCP or 802.1Q #define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_MIN (0) #define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_MAX (1) #define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_DEFAULT (0) //DSCP /* default TSPEC parameters for AC_VO */ #define CFG_QOS_WMM_INFRA_DIR_AC_VO_NAME "InfraDirAcVo" #define CFG_QOS_WMM_INFRA_DIR_AC_VO_MIN (0) #define CFG_QOS_WMM_INFRA_DIR_AC_VO_MAX (3) #define CFG_QOS_WMM_INFRA_DIR_AC_VO_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_NAME "InfraNomMsduSizeAcVo" #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_MIN (0x0) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_DEFAULT (0x80D0) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_NAME "InfraMeanDataRateAcVo" #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_MIN (0x0) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_DEFAULT (0x14500) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_NAME "InfraMinPhyRateAcVo" #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_MIN (0x0) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_DEFAULT (0x5B8D80) #define CFG_QOS_WMM_INFRA_SBA_AC_VO_NAME "InfraSbaAcVo" #define CFG_QOS_WMM_INFRA_SBA_AC_VO_MIN (0x2001) #define CFG_QOS_WMM_INFRA_SBA_AC_VO_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_SBA_AC_VO_DEFAULT (0x2001) /* default TSPEC parameters for AC_VI */ #define CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME "InfraDirAcVi" #define CFG_QOS_WMM_INFRA_DIR_AC_VI_MIN (0) #define CFG_QOS_WMM_INFRA_DIR_AC_VI_MAX (3) #define CFG_QOS_WMM_INFRA_DIR_AC_VI_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME "InfraNomMsduSizeAcVi" #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_MIN (0x0) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_DEFAULT (0x85DC) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME "InfraMeanDataRateAcVi" #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_MIN (0x0) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_DEFAULT (0x57E40) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME "InfraMinPhyRateAcVi" #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_MIN (0x0) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_DEFAULT (0x5B8D80) #define CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME "InfraSbaAcVi" #define CFG_QOS_WMM_INFRA_SBA_AC_VI_MIN (0x2001) #define CFG_QOS_WMM_INFRA_SBA_AC_VI_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_SBA_AC_VI_DEFAULT (0x2001) /* default TSPEC parameters for AC_BE*/ #define CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME "InfraDirAcBe" #define CFG_QOS_WMM_INFRA_DIR_AC_BE_MIN (0) #define CFG_QOS_WMM_INFRA_DIR_AC_BE_MAX (3) #define CFG_QOS_WMM_INFRA_DIR_AC_BE_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME "InfraNomMsduSizeAcBe" #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_MIN (0x0) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_DEFAULT (0x85DC) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME "InfraMeanDataRateAcBe" #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_MIN (0x0) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_DEFAULT (0x493E0) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME "InfraMinPhyRateAcBe" #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_MIN (0x0) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_DEFAULT (0x5B8D80) #define CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME "InfraSbaAcBe" #define CFG_QOS_WMM_INFRA_SBA_AC_BE_MIN (0x2001) #define CFG_QOS_WMM_INFRA_SBA_AC_BE_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_SBA_AC_BE_DEFAULT (0x2001) /* default TSPEC parameters for AC_Bk*/ #define CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME "InfraDirAcBk" #define CFG_QOS_WMM_INFRA_DIR_AC_BK_MIN (0) #define CFG_QOS_WMM_INFRA_DIR_AC_BK_MAX (3) #define CFG_QOS_WMM_INFRA_DIR_AC_BK_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME "InfraNomMsduSizeAcBk" #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_MIN (0x0) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_DEFAULT (0x85DC) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME "InfraMeanDataRateAcBk" #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_MIN (0x0) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_DEFAULT (0x493E0) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME "InfraMinPhyRateAcBk" #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_MIN (0x0) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_MAX (0xFFFFFFFF) #define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_DEFAULT (0x5B8D80) #define CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME "InfraSbaAcBk" #define CFG_QOS_WMM_INFRA_SBA_AC_BK_MIN (0x2001) #define CFG_QOS_WMM_INFRA_SBA_AC_BK_MAX (0xFFFF) #define CFG_QOS_WMM_INFRA_SBA_AC_BK_DEFAULT (0x2001) // TL configuration #define CFG_TL_WFQ_BK_WEIGHT_NAME "WfqBkWeight" #define CFG_TL_WFQ_BK_WEIGHT_MIN 1 #define CFG_TL_WFQ_BK_WEIGHT_MAX 0xFF #define CFG_TL_WFQ_BK_WEIGHT_DEFAULT 1 #define CFG_TL_WFQ_BE_WEIGHT_NAME "WfqBeWeight" #define CFG_TL_WFQ_BE_WEIGHT_MIN 1 #define CFG_TL_WFQ_BE_WEIGHT_MAX 0xFF #define CFG_TL_WFQ_BE_WEIGHT_DEFAULT 3 #define CFG_TL_WFQ_VI_WEIGHT_NAME "WfqViWeight" #define CFG_TL_WFQ_VI_WEIGHT_MIN 1 #define CFG_TL_WFQ_VI_WEIGHT_MAX 0xFF #define CFG_TL_WFQ_VI_WEIGHT_DEFAULT 7 #define CFG_TL_WFQ_VO_WEIGHT_NAME "WfqVoWeight" #define CFG_TL_WFQ_VO_WEIGHT_MIN 1 #define CFG_TL_WFQ_VO_WEIGHT_MAX 0xFF #define CFG_TL_WFQ_VO_WEIGHT_DEFAULT 7 #define CFG_TL_DELAYED_TRGR_FRM_INT_NAME "DelayedTriggerFrmInt" #define CFG_TL_DELAYED_TRGR_FRM_INT_MIN 1 #define CFG_TL_DELAYED_TRGR_FRM_INT_MAX (4294967295UL) #define CFG_TL_DELAYED_TRGR_FRM_INT_DEFAULT 3000 #define CFG_REORDER_TIME_BK_NAME "BkReorderTime" #define CFG_REORDER_TIME_BK_MIN 30 #define CFG_REORDER_TIME_BK_MAX 1000 #define CFG_REORDER_TIME_BK_DEFAULT 100 #define CFG_REORDER_TIME_BE_NAME "BeReorderTime" #define CFG_REORDER_TIME_BE_MIN 30 #define CFG_REORDER_TIME_BE_MAX 1000 #define CFG_REORDER_TIME_BE_DEFAULT 100 #define CFG_REORDER_TIME_VI_NAME "ViReorderTime" #define CFG_REORDER_TIME_VI_MIN 30 #define CFG_REORDER_TIME_VI_MAX 1000 #define CFG_REORDER_TIME_VI_DEFAULT 100 #define CFG_REORDER_TIME_VO_NAME "VoReorderTime" #define CFG_REORDER_TIME_VO_MIN 30 #define CFG_REORDER_TIME_VO_MAX 1000 #define CFG_REORDER_TIME_VO_DEFAULT 40 #define CFG_ENABLE_PN_REPLAY_NAME "PNreplayCheck" #define CFG_ENABLE_PN_REPLAY_MIN 0 #define CFG_ENABLE_PN_REPLAY_MAX 1 #define CFG_ENABLE_PN_REPLAY_DEFAULT 0 #if defined WLAN_FEATURE_VOWIFI #define CFG_RRM_ENABLE_NAME "gRrmEnable" #define CFG_RRM_ENABLE_MIN (0) #define CFG_RRM_ENABLE_MAX (1) #define CFG_RRM_ENABLE_DEFAULT (0) #define CFG_RRM_OPERATING_CHAN_MAX_DURATION_NAME "gRrmOperChanMax" //section 11.10.3 IEEE std. 802.11k-2008 #define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MIN (0) //Maxduration = 2^(maxDuration - 4) * bcnIntvl. #define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MAX (8) #define CFG_RRM_OPERATING_CHAN_MAX_DURATION_DEFAULT (3) //max duration = 2^-1 * bcnIntvl (50% of bcn intvl) #define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_NAME "gRrmNonOperChanMax" //Same as above. #define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MIN (0) #define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MAX (8) #define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_DEFAULT (3) #define CFG_RRM_MEAS_RANDOMIZATION_INTVL_NAME "gRrmRandnIntvl" #define CFG_RRM_MEAS_RANDOMIZATION_INTVL_MIN (10) #define CFG_RRM_MEAS_RANDOMIZATION_INTVL_MAX (100) #define CFG_RRM_MEAS_RANDOMIZATION_INTVL_DEFAULT (100) #endif #define CFG_QOS_IMPLICIT_SETUP_ENABLED_NAME "ImplicitQosIsEnabled" #define CFG_QOS_IMPLICIT_SETUP_ENABLED_MIN (0) #define CFG_QOS_IMPLICIT_SETUP_ENABLED_MAX (1) #define CFG_QOS_IMPLICIT_SETUP_ENABLED_DEFAULT (1) #define CFG_ENABLE_LOGP_NAME "gEnableLogp" #define CFG_ENABLE_LOGP_MIN ( 0 ) #define CFG_ENABLE_LOGP_MAX ( 1 ) #define CFG_ENABLE_LOGP_DEFAULT ( 1 ) #define CFG_BTC_EXECUTION_MODE_NAME "BtcExecutionMode" #define CFG_BTC_EXECUTION_MODE_MIN ( 0 ) #define CFG_BTC_EXECUTION_MODE_MAX ( 5 ) #define CFG_BTC_EXECUTION_MODE_DEFAULT ( 0 ) #define CFG_BTC_DHCP_PROTECTION_NAME "BtcConsBtSlotToBlockDuringDhcp" #define CFG_BTC_DHCP_PROTECTION_MIN ( 0 ) #define CFG_BTC_DHCP_PROTECTION_MAX ( 0xFF ) #define CFG_BTC_DHCP_PROTECTION_DEFAULT ( 0 ) #define CFG_BTC_A2DP_DHCP_PROTECTION_NAME "BtcA2DPDhcpProtectLevel" #define CFG_BTC_A2DP_DHCP_PROTECTION_MIN ( 0 ) #define CFG_BTC_A2DP_DHCP_PROTECTION_MAX ( 0xFF ) #define CFG_BTC_A2DP_DHCP_PROTECTION_DEFAULT ( 7 ) #define CFG_BTC_STATIC_LEN_INQ_BT_NAME "btcStaticLenInqBt" #define CFG_BTC_STATIC_LEN_INQ_BT_MIN ( 5000 ) #define CFG_BTC_STATIC_LEN_INQ_BT_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_INQ_BT_DEFAULT ( 120000 ) #define CFG_BTC_STATIC_LEN_PAGE_BT_NAME "btcStaticLenPageBt" #define CFG_BTC_STATIC_LEN_PAGE_BT_MIN ( 5000 ) #define CFG_BTC_STATIC_LEN_PAGE_BT_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_PAGE_BT_DEFAULT ( 120000 ) #define CFG_BTC_STATIC_LEN_CONN_BT_NAME "btcStaticLenConnBt" #define CFG_BTC_STATIC_LEN_CONN_BT_MIN ( 5000 ) #define CFG_BTC_STATIC_LEN_CONN_BT_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_CONN_BT_DEFAULT ( 120000 ) #define CFG_BTC_STATIC_LEN_LE_BT_NAME "btcStaticLenLeBt" #define CFG_BTC_STATIC_LEN_LE_BT_MIN ( 5000 ) #define CFG_BTC_STATIC_LEN_LE_BT_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_LE_BT_DEFAULT ( 120000 ) #define CFG_BTC_STATIC_LEN_INQ_WLAN_NAME "btcStaticLenInqWlan" #define CFG_BTC_STATIC_LEN_INQ_WLAN_MIN ( 0 ) #define CFG_BTC_STATIC_LEN_INQ_WLAN_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_INQ_WLAN_DEFAULT ( 30000 ) #define CFG_BTC_STATIC_LEN_PAGE_WLAN_NAME "btcStaticLenPageWlan" #define CFG_BTC_STATIC_LEN_PAGE_WLAN_MIN ( 0 ) #define CFG_BTC_STATIC_LEN_PAGE_WLAN_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_PAGE_WLAN_DEFAULT ( 30000 ) #define CFG_BTC_STATIC_LEN_CONN_WLAN_NAME "btcStaticLenConnWlan" #define CFG_BTC_STATIC_LEN_CONN_WLAN_MIN ( 0 ) #define CFG_BTC_STATIC_LEN_CONN_WLAN_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_CONN_WLAN_DEFAULT ( 30000 ) #define CFG_BTC_STATIC_LEN_LE_WLAN_NAME "btcStaticLenLeWlan" #define CFG_BTC_STATIC_LEN_LE_WLAN_MIN ( 0 ) #define CFG_BTC_STATIC_LEN_LE_WLAN_MAX ( 500000 ) #define CFG_BTC_STATIC_LEN_LE_WLAN_DEFAULT ( 30000 ) #define CFG_BTC_DYN_MAX_LEN_BT_NAME "btcDynMaxLenBt" #define CFG_BTC_DYN_MAX_LEN_BT_MIN ( 25000 ) #define CFG_BTC_DYN_MAX_LEN_BT_MAX ( 500000 ) #define CFG_BTC_DYN_MAX_LEN_BT_DEFAULT ( 250000 ) #define CFG_BTC_DYN_MAX_LEN_WLAN_NAME "btcDynMaxLenWlan" #define CFG_BTC_DYN_MAX_LEN_WLAN_MIN ( 15000 ) #define CFG_BTC_DYN_MAX_LEN_WLAN_MAX ( 500000 ) #define CFG_BTC_DYN_MAX_LEN_WLAN_DEFAULT ( 45000 ) #define CFG_BTC_MAX_SCO_BLOCK_PERC_NAME "btcMaxScoBlockPerc" #define CFG_BTC_MAX_SCO_BLOCK_PERC_MIN ( 0 ) #define CFG_BTC_MAX_SCO_BLOCK_PERC_MAX ( 100 ) #define CFG_BTC_MAX_SCO_BLOCK_PERC_DEFAULT ( 1 ) #define CFG_BTC_DHCP_PROT_ON_A2DP_NAME "btcDhcpProtOnA2dp" #define CFG_BTC_DHCP_PROT_ON_A2DP_MIN ( 0 ) #define CFG_BTC_DHCP_PROT_ON_A2DP_MAX ( 1 ) #define CFG_BTC_DHCP_PROT_ON_A2DP_DEFAULT ( 1 ) #define CFG_BTC_DHCP_PROT_ON_SCO_NAME "btcDhcpProtOnSco" #define CFG_BTC_DHCP_PROT_ON_SCO_MIN ( 0 ) #define CFG_BTC_DHCP_PROT_ON_SCO_MAX ( 1 ) #define CFG_BTC_DHCP_PROT_ON_SCO_DEFAULT ( 0 ) #define CFG_MWS_COEX_V1_WAN_FREQ_NAME "mwsCoexVictim1WANFreq" #define CFG_MWS_COEX_VX_WAN_FREQ_MIN ( 0 ) #define CFG_MWS_COEX_VX_WAN_FREQ_MAX ( 0xFFFFFFFF ) #define CFG_MWS_COEX_VX_WAN_FREQ_DEFAULT ( 0 ) #define CFG_MWS_COEX_V1_WLAN_FREQ_NAME "mwsCoexVictim1WLANFreq" #define CFG_MWS_COEX_VX_WLAN_FREQ_MIN ( 0 ) #define CFG_MWS_COEX_VX_WLAN_FREQ_MAX ( 0xFFFFFFFF ) #define CFG_MWS_COEX_VX_WLAN_FREQ_DEFAULT ( 0 ) #define CFG_MWS_COEX_V1_CONFIG_NAME "mwsCoexVictim1Config" #define CFG_MWS_COEX_V1_CONFIG2_NAME "mwsCoexVictim1Config2" #define CFG_MWS_COEX_VX_CONFIG_MIN ( 0 ) #define CFG_MWS_COEX_VX_CONFIG_MAX ( 0xFFFFFFFF ) #define CFG_MWS_COEX_VX_CONFIG_DEFAULT ( 0 ) #define CFG_MWS_COEX_V2_WAN_FREQ_NAME "mwsCoexVictim2WANFreq" #define CFG_MWS_COEX_V2_WLAN_FREQ_NAME "mwsCoexVictim2WLANFreq" #define CFG_MWS_COEX_V2_CONFIG_NAME "mwsCoexVictim2Config" #define CFG_MWS_COEX_V2_CONFIG2_NAME "mwsCoexVictim2Config2" #define CFG_MWS_COEX_V3_WAN_FREQ_NAME "mwsCoexVictim3WANFreq" #define CFG_MWS_COEX_V3_WLAN_FREQ_NAME "mwsCoexVictim3WLANFreq" #define CFG_MWS_COEX_V3_CONFIG_NAME "mwsCoexVictim3Config" #define CFG_MWS_COEX_V3_CONFIG2_NAME "mwsCoexVictim3Config2" #define CFG_MWS_COEX_V4_WAN_FREQ_NAME "mwsCoexVictim4WANFreq" #define CFG_MWS_COEX_V4_WLAN_FREQ_NAME "mwsCoexVictim4WLANFreq" #define CFG_MWS_COEX_V4_CONFIG_NAME "mwsCoexVictim4Config" #define CFG_MWS_COEX_V4_CONFIG2_NAME "mwsCoexVictim4Config2" #define CFG_MWS_COEX_V5_WAN_FREQ_NAME "mwsCoexVictim5WANFreq" #define CFG_MWS_COEX_V5_WLAN_FREQ_NAME "mwsCoexVictim5WLANFreq" #define CFG_MWS_COEX_V5_CONFIG_NAME "mwsCoexVictim5Config" #define CFG_MWS_COEX_V5_CONFIG2_NAME "mwsCoexVictim5Config2" #define CFG_MWS_COEX_V6_WAN_FREQ_NAME "mwsCoexVictim6WANFreq" #define CFG_MWS_COEX_V6_WLAN_FREQ_NAME "mwsCoexVictim6WLANFreq" #define CFG_MWS_COEX_V6_CONFIG_NAME "mwsCoexVictim6Config" #define CFG_MWS_COEX_V6_CONFIG2_NAME "mwsCoexVictim6Config2" #define CFG_MWS_COEX_V7_WAN_FREQ_NAME "mwsCoexVictim7WANFreq" #define CFG_MWS_COEX_V7_WLAN_FREQ_NAME "mwsCoexVictim7WLANFreq" #define CFG_MWS_COEX_V7_CONFIG_NAME "mwsCoexVictim7Config" #define CFG_MWS_COEX_V7_CONFIG2_NAME "mwsCoexVictim7Config2" #define CFG_MWS_COEX_V8_WAN_FREQ_NAME "mwsCoexVictim8WANFreq" #define CFG_MWS_COEX_V8_WLAN_FREQ_NAME "mwsCoexVictim8WLANFreq" #define CFG_MWS_COEX_V8_CONFIG_NAME "mwsCoexVictim8Config" #define CFG_MWS_COEX_V8_CONFIG2_NAME "mwsCoexVictim8Config2" #define CFG_MWS_COEX_V9_WAN_FREQ_NAME "mwsCoexVictim9WANFreq" #define CFG_MWS_COEX_V9_WLAN_FREQ_NAME "mwsCoexVictim9WLANFreq" #define CFG_MWS_COEX_V9_CONFIG_NAME "mwsCoexVictim9Config" #define CFG_MWS_COEX_V9_CONFIG2_NAME "mwsCoexVictim9Config2" #define CFG_MWS_COEX_V10_WAN_FREQ_NAME "mwsCoexVictim10WANFreq" #define CFG_MWS_COEX_V10_WLAN_FREQ_NAME "mwsCoexVictim10WLANFreq" #define CFG_MWS_COEX_V10_CONFIG_NAME "mwsCoexVictim10Config" #define CFG_MWS_COEX_V10_CONFIG2_NAME "mwsCoexVictim10Config2" #define CFG_MWS_COEX_MODEM_BACKOFF_NAME "mwsCoexModemBackoff" #define CFG_MWS_COEX_MODEM_BACKOFF_MIN ( 0 ) #define CFG_MWS_COEX_MODEM_BACKOFF_MAX ( 0xFFFFFFFF ) #define CFG_MWS_COEX_MODEM_BACKOFF_DEFAULT ( 0 ) #define CFG_MWS_COEX_CONFIG1_NAME "mwsCoexConfig1" #define CFG_MWS_COEX_CONFIGX_MIN ( 0 ) #define CFG_MWS_COEX_CONFIGX_MAX ( 0xFFFFFFFF ) #define CFG_MWS_COEX_CONFIGX_DEFAULT ( 0 ) #define CFG_MWS_COEX_CONFIG2_NAME "mwsCoexConfig2" #define CFG_MWS_COEX_CONFIG3_NAME "mwsCoexConfig3" #define CFG_MWS_COEX_CONFIG4_NAME "mwsCoexConfig4" #define CFG_MWS_COEX_CONFIG5_NAME "mwsCoexConfig5" #define CFG_MWS_COEX_CONFIG6_NAME "mwsCoexConfig6" #define CFG_SAR_POWER_BACKOFF_NAME "SARPowerBackoff" #define CFG_SAR_POWER_BACKOFF_MIN ( 0 ) #define CFG_SAR_POWER_BACKOFF_MAX ( 0xFFFFFFFF ) #define CFG_SAR_POWER_BACKOFF_DEFAULT ( 13 ) #if defined WLAN_FEATURE_VOWIFI_11R #define CFG_FT_RESOURCE_REQ_NAME "gFTResourceReqSupported" #define CFG_FT_RESOURCE_REQ_MIN (0) #define CFG_FT_RESOURCE_REQ_MAX (1) #define CFG_FT_RESOURCE_REQ_DEFAULT (0) #endif #define CFG_TELE_BCN_TRANS_LI_NAME "telescopicBeaconTransListenInterval" #define CFG_TELE_BCN_TRANS_LI_MIN ( 0 ) #define CFG_TELE_BCN_TRANS_LI_MAX ( 7 ) #define CFG_TELE_BCN_TRANS_LI_DEFAULT ( 3 ) #define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_NAME "telescopicBeaconTransListenIntervalNumIdleBcns" #define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_MIN ( 5 ) #define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_MAX ( 255 ) #define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_DEFAULT ( 10 ) #define CFG_TELE_BCN_MAX_LI_NAME "telescopicBeaconMaxListenInterval" #define CFG_TELE_BCN_MAX_LI_MIN ( 0 ) #define CFG_TELE_BCN_MAX_LI_MAX ( 7 ) #define CFG_TELE_BCN_MAX_LI_DEFAULT ( 5 ) #define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_NAME "telescopicBeaconMaxListenIntervalNumIdleBcns" #define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_MIN ( 5 ) #define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_MAX ( 255 ) #define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_DEFAULT ( 15 ) #define CFG_BCN_EARLY_TERM_WAKE_NAME "beaconEarlyTerminationWakeInterval" #define CFG_BCN_EARLY_TERM_WAKE_MIN ( 2 ) #define CFG_BCN_EARLY_TERM_WAKE_MAX ( 255 ) #define CFG_BCN_EARLY_TERM_WAKE_DEFAULT ( 3 ) #define CFG_ENABLE_ROAM_DELAY_STATS "gEnableRoamDelayStats" #define CFG_ENABLE_ROAM_DELAY_STATS_MIN ( 0 ) #define CFG_ENABLE_ROAM_DELAY_STATS_MAX ( 1 ) #define CFG_ENABLE_ROAM_DELAY_STATS_DEFAULT ( 0 ) #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING #define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_NAME "gNeighborScanTimerPeriod" #define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_MIN (3) #define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_MAX (300) #define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_DEFAULT (200) #define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_NAME "gNeighborReassocThreshold" #define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_MIN (10) #define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_MAX (125) #define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_DEFAULT (83) #define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_NAME "gNeighborLookupThreshold" #define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_MIN (0) #define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_MAX (120) #define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_DEFAULT (0) /*A Zero value indicates the host to calculate Adaptive thresold based on the minimum supported data rate.*/ #define CFG_NEIGHBOR_SCAN_CHAN_LIST_NAME "gNeighborScanChannelList" #define CFG_NEIGHBOR_SCAN_CHAN_LIST_DEFAULT "" #define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_NAME "gNeighborScanChannelMinTime" #define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_MIN (10) #define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_MAX (40) #define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_DEFAULT (20) #define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_NAME "gNeighborScanChannelMaxTime" #define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_MIN (3) #define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_MAX (300) #define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_DEFAULT (30) #define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_NAME "gMaxNeighborReqTries" #define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_MIN (1) #define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_MAX (4) #define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_DEFAULT (3) #define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_NAME "gNeighborScanRefreshPeriod" #define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_MIN (1000) #define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_MAX (60000) #define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_DEFAULT (20000) #define CFG_EMPTY_SCAN_REFRESH_PERIOD_NAME "gEmptyScanRefreshPeriod" #define CFG_EMPTY_SCAN_REFRESH_PERIOD_MIN (0) #define CFG_EMPTY_SCAN_REFRESH_PERIOD_MAX (60000) #define CFG_EMPTY_SCAN_REFRESH_PERIOD_DEFAULT (0) #define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_NAME "gNeighborInitialForcedRoamTo5GhEnable" #define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_MIN (0) #define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_MAX (1) #define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_DEFAULT (0) /* * gWeakZoneRssiThresholdForRoam is the minimum threshold value to get * candidate list from firmware, firmware filters the received candidate with * this param before sending candidate list to host. */ #define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_NAME "gWeakZoneRssiThresholdForRoam" #define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_MIN (40) #define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_MAX (100) #define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_DEFAULT (80) #endif /* WLAN_FEATURE_NEIGHBOR_ROAMING */ #define CFG_QOS_WMM_BURST_SIZE_DEFN_NAME "burstSizeDefinition" #define CFG_QOS_WMM_BURST_SIZE_DEFN_MIN (0) #define CFG_QOS_WMM_BURST_SIZE_DEFN_MAX (1) #define CFG_QOS_WMM_BURST_SIZE_DEFN_DEFAULT (0) #define CFG_QOS_WMM_TS_INFO_ACK_POLICY_NAME "tsInfoAckPolicy" #define CFG_QOS_WMM_TS_INFO_ACK_POLICY_MIN (0x00) #define CFG_QOS_WMM_TS_INFO_ACK_POLICY_MAX (0x01) #define CFG_QOS_WMM_TS_INFO_ACK_POLICY_DEFAULT (0x00) #define CFG_SINGLE_TID_RC_NAME "SingleTIDRC" #define CFG_SINGLE_TID_RC_MIN (0) // Seperate replay counter for all TID #define CFG_SINGLE_TID_RC_MAX (1) // Single replay counter for all TID #define CFG_SINGLE_TID_RC_DEFAULT (1) #define CFG_MCAST_BCAST_FILTER_SETTING_NAME "McastBcastFilter" #define CFG_MCAST_BCAST_FILTER_SETTING_MIN (0) #define CFG_MCAST_BCAST_FILTER_SETTING_MAX (3) #define CFG_MCAST_BCAST_FILTER_SETTING_DEFAULT (0) #define CFG_DYNAMIC_PSPOLL_VALUE_NAME "gDynamicPSPollvalue" #define CFG_DYNAMIC_PSPOLL_VALUE_MIN (0) #define CFG_DYNAMIC_PSPOLL_VALUE_MAX (255) #define CFG_DYNAMIC_PSPOLL_VALUE_DEFAULT (0) #define CFG_TELE_BCN_WAKEUP_EN_NAME "gTelescopicBeaconWakeupEn" #define CFG_TELE_BCN_WAKEUP_EN_MIN (0) #define CFG_TELE_BCN_WAKEUP_EN_MAX (1) #define CFG_TELE_BCN_WAKEUP_EN_DEFAULT (0) #define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_NAME "gAddTSWhenACMIsOff" #define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_MIN (0) #define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_MAX (1) //Send AddTs even when ACM is not set for the AC #define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_DEFAULT (0) #define CFG_VALIDATE_SCAN_LIST_NAME "gValidateScanList" #define CFG_VALIDATE_SCAN_LIST_MIN (0) #define CFG_VALIDATE_SCAN_LIST_MAX (1) #define CFG_VALIDATE_SCAN_LIST_DEFAULT (0) #define CFG_NULLDATA_AP_RESP_TIMEOUT_NAME "gNullDataApRespTimeout" #define CFG_NULLDATA_AP_RESP_TIMEOUT_MIN ( WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT_STAMIN ) #define CFG_NULLDATA_AP_RESP_TIMEOUT_MAX ( WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT_STAMAX ) #define CFG_NULLDATA_AP_RESP_TIMEOUT_DEFAULT ( WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT_STADEF ) #define CFG_AP_DATA_AVAIL_POLL_PERIOD_NAME "gApDataAvailPollInterval" #define CFG_AP_DATA_AVAIL_POLL_PERIOD_MIN ( WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD_STAMIN ) #define CFG_AP_DATA_AVAIL_POLL_PERIOD_MAX ( WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD_STAMAX ) #define CFG_AP_DATA_AVAIL_POLL_PERIOD_DEFAULT ( WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD_STADEF ) #define CFG_ENABLE_HOST_ARPOFFLOAD_NAME "hostArpOffload" #define CFG_ENABLE_HOST_ARPOFFLOAD_MIN ( 0 ) #define CFG_ENABLE_HOST_ARPOFFLOAD_MAX ( 1 ) #define CFG_ENABLE_HOST_ARPOFFLOAD_DEFAULT ( 1 ) #define CFG_ENABLE_HOST_NSOFFLOAD_NAME "hostNSOffload" #define CFG_ENABLE_HOST_NSOFFLOAD_MIN ( 0 ) #define CFG_ENABLE_HOST_NSOFFLOAD_MAX ( 1 ) #define CFG_ENABLE_HOST_NSOFFLOAD_DEFAULT ( 1 ) #define CFG_ENABLE_BTAMP_NAME "gEnableBtAmp" #define CFG_ENABLE_BTAMP_MIN ( 0 ) #define CFG_ENABLE_BTAMP_MAX ( 1 ) #define CFG_ENABLE_BTAMP_DEFAULT ( 0 ) #ifdef WLAN_BTAMP_FEATURE #define CFG_BT_AMP_PREFERRED_CHANNEL_NAME "BtAmpPreferredChannel" #define CFG_BT_AMP_PREFERRED_CHANNEL_MIN (1) #define CFG_BT_AMP_PREFERRED_CHANNEL_MAX (11) #define CFG_BT_AMP_PREFERRED_CHANNEL_DEFAULT (1) #endif //WLAN_BTAMP_FEATURE #define CFG_BAND_CAPABILITY_NAME "BandCapability" #define CFG_BAND_CAPABILITY_MIN (0) #define CFG_BAND_CAPABILITY_MAX (2) #define CFG_BAND_CAPABILITY_DEFAULT (1) #define CFG_ENABLE_BEACON_EARLY_TERMINATION_NAME "enableBeaconEarlyTermination" #define CFG_ENABLE_BEACON_EARLY_TERMINATION_MIN ( 0 ) #define CFG_ENABLE_BEACON_EARLY_TERMINATION_MAX ( 1 ) #define CFG_ENABLE_BEACON_EARLY_TERMINATION_DEFAULT ( 0 ) #define CFG_ENABLE_CLOSE_LOOP_NAME "gEnableCloseLoop" #define CFG_ENABLE_CLOSE_LOOP_MIN WNI_CFG_FIXED_RATE_STAMIN #define CFG_ENABLE_CLOSE_LOOP_MAX WNI_CFG_FIXED_RATE_STAMAX #define CFG_ENABLE_CLOSE_LOOP_DEFAULT WNI_CFG_FIXED_RATE_STADEF #define CFG_ENABLE_BYPASS_11D_NAME "gEnableBypass11d" #define CFG_ENABLE_BYPASS_11D_MIN ( 0 ) #define CFG_ENABLE_BYPASS_11D_MAX ( 1 ) #define CFG_ENABLE_BYPASS_11D_DEFAULT ( 1 ) /* * gEnableDFSChnlScan * 0: disable scan on DFS channels * 1: enables passive scan on DFS channels * 2: enables active scan on DFS channels for static list. * Static or cfg list is the channel list set by ioctl SETROAMSCANCHANNELS. */ #define CFG_ENABLE_DFS_CHNL_SCAN_NAME "gEnableDFSChnlScan" #define CFG_ENABLE_DFS_CHNL_SCAN_MIN ( 0 ) #define CFG_ENABLE_DFS_CHNL_SCAN_MAX ( 2 ) #define CFG_ENABLE_DFS_CHNL_SCAN_DEFAULT ( 1 ) #define CFG_ENABLE_DFS_PNO_CHNL_SCAN_NAME "gEnableDFSPnoChnlScan" #define CFG_ENABLE_DFS_PNO_CHNL_SCAN_MIN ( 0 ) #define CFG_ENABLE_DFS_PNO_CHNL_SCAN_MAX ( 1 ) #define CFG_ENABLE_DFS_PNO_CHNL_SCAN_DEFAULT ( 1 ) /* * gStaAuthRetriesForCode17 * It is for an IOT issue. * When DUT receives MAX_ASSOC_STA_REACHED_STATUS as * response for Auth frame this ini decides how many * times DUT has to retry. * * This is mainly for an AP where it wants to force * the Station to connect to its 5G profile session * (Dual band AP) by rejecting the Auth on 2.4G band. * But if a station is only 2.4G capable it can try * 3 times where third time AP will allow the * station to connect to this AP. */ #define CFG_STA_AUTH_RETRIES_FOR_CODE17_NAME "gStaAuthRetriesForCode17" #define CFG_STA_AUTH_RETRIES_FOR_CODE17_MIN ( 0 ) #define CFG_STA_AUTH_RETRIES_FOR_CODE17_MAX ( 5 ) #define CFG_STA_AUTH_RETRIES_FOR_CODE17_DEFAULT ( 0 ) /* * * gindoor_channel_support - Mark indoor channels as enabled or passive * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to control the state of indoor channels. If the * value is 1 then the indoor channels will be marked as enabled and * if the value is 0 then the indoor channels will be marked as * DFS * * The default value is 0 * */ #define CFG_INDOOR_CHANNEL_SUPPORT_NAME "gindoor_channel_support" #define CFG_INDOOR_CHANNEL_SUPPORT_MIN (0) #define CFG_INDOOR_CHANNEL_SUPPORT_MAX (1) #define CFG_INDOOR_CHANNEL_SUPPORT_DEFAULT (0) /* * * g_mark_indoor_as_disable - Enable/Disable Indoor channel * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to mark the Indoor channel as * disable when SAP start and revert it on SAP stop, * so SAP will not turn on indoor channel and * sta will not scan/associate and roam on indoor * channels. * * Related: If g_mark_indoor_as_disable set, turn the * indoor channels to disable and update Wiphy & fw. * * Supported Feature: SAP/STA * * Usage: External * * */ #define CFG_MARK_INDOOR_AS_DISABLE_NAME "g_mark_indoor_as_disable" #define CFG_MARK_INDOOR_AS_DISABLE_MIN (0) #define CFG_MARK_INDOOR_AS_DISABLE_MAX (1) #define CFG_MARK_INDOOR_AS_DISABLE_DEFAULT (0) typedef enum { eHDD_LINK_SPEED_REPORT_ACTUAL = 0, eHDD_LINK_SPEED_REPORT_MAX = 1, eHDD_LINK_SPEED_REPORT_MAX_SCALED = 2, }eHddLinkSpeedReportType; #ifdef WLAN_FEATURE_11AC #define CFG_VHT_CHANNEL_WIDTH "gVhtChannelWidth" #define CFG_VHT_CHANNEL_WIDTH_MIN ( 0 ) #define CFG_VHT_CHANNEL_WIDTH_MAX ( 2 ) #define CFG_VHT_CHANNEL_WIDTH_DEFAULT ( 2 ) #define CFG_VHT_ENABLE_RX_MCS_8_9 "gVhtRxMCS" #define CFG_VHT_ENABLE_RX_MCS_8_9_MIN ( 0 ) #define CFG_VHT_ENABLE_RX_MCS_8_9_MAX ( 2 ) #define CFG_VHT_ENABLE_RX_MCS_8_9_DEFAULT ( 0 ) #define CFG_VHT_ENABLE_TX_MCS_8_9 "gVhtTxMCS" #define CFG_VHT_ENABLE_TX_MCS_8_9_MIN ( 0 ) #define CFG_VHT_ENABLE_TX_MCS_8_9_MAX ( 2 ) #define CFG_VHT_ENABLE_TX_MCS_8_9_DEFAULT ( 0 ) #endif #define CFG_REPORT_MAX_LINK_SPEED "gReportMaxLinkSpeed" #define CFG_REPORT_MAX_LINK_SPEED_MIN ( eHDD_LINK_SPEED_REPORT_ACTUAL ) #define CFG_REPORT_MAX_LINK_SPEED_MAX ( eHDD_LINK_SPEED_REPORT_MAX_SCALED ) #define CFG_REPORT_MAX_LINK_SPEED_DEFAULT ( eHDD_LINK_SPEED_REPORT_MAX_SCALED ) /* * RSSI Thresholds * Used when eHDD_LINK_SPEED_REPORT_SCALED is selected */ #define CFG_LINK_SPEED_RSSI_HIGH "gLinkSpeedRssiHigh" #define CFG_LINK_SPEED_RSSI_HIGH_MIN ( -127 ) #define CFG_LINK_SPEED_RSSI_HIGH_MAX ( 0 ) #define CFG_LINK_SPEED_RSSI_HIGH_DEFAULT ( -55 ) #define CFG_LINK_SPEED_RSSI_MID "gLinkSpeedRssiMed" #define CFG_LINK_SPEED_RSSI_MID_MIN ( -127 ) #define CFG_LINK_SPEED_RSSI_MID_MAX ( 0 ) #define CFG_LINK_SPEED_RSSI_MID_DEFAULT ( -65 ) #define CFG_LINK_SPEED_RSSI_LOW "gLinkSpeedRssiLow" #define CFG_LINK_SPEED_RSSI_LOW_MIN ( -127 ) #define CFG_LINK_SPEED_RSSI_LOW_MAX ( 0 ) #define CFG_LINK_SPEED_RSSI_LOW_DEFAULT ( -80 ) #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_NAME "isP2pDeviceAddrAdministrated" #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_MIN ( 0 ) #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_MAX ( 1 ) #define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_DEFAULT ( 1 ) #define CFG_ENABLE_SSR "gEnableSSR" #define CFG_ENABLE_SSR_MIN ( 0 ) #define CFG_ENABLE_SSR_MAX ( 1 ) #define CFG_ENABLE_SSR_DEFAULT ( 1 ) #define CFG_BTC_ACTIVE_WLAN_LEN_NAME "btcActiveWlanLen" #define CFG_BTC_ACTIVE_WLAN_LEN_MIN ( 0 ) #define CFG_BTC_ACTIVE_WLAN_LEN_MAX ( 250000 ) #define CFG_BTC_ACTIVE_WLAN_LEN_DEFAULT ( 60000 ) #define CFG_BTC_ACTIVE_BT_LEN_NAME "btcActiveBtLen" #define CFG_BTC_ACTIVE_BT_LEN_MIN ( 0 ) #define CFG_BTC_ACTIVE_BT_LEN_MAX ( 250000 ) #define CFG_BTC_ACTIVE_BT_LEN_DEFAULT ( 90000 ) #define CFG_BTC_SAP_ACTIVE_WLAN_LEN_NAME "btcSapActiveWlanLen" #define CFG_BTC_SAP_ACTIVE_WLAN_LEN_MIN ( 0 ) #define CFG_BTC_SAP_ACTIVE_WLAN_LEN_MAX ( 250000 ) #define CFG_BTC_SAP_ACTIVE_WLAN_LEN_DEFAULT ( 30000 ) #define CFG_BTC_SAP_ACTIVE_BT_LEN_NAME "btcSapActiveBtLen" #define CFG_BTC_SAP_ACTIVE_BT_LEN_MIN ( 0 ) #define CFG_BTC_SAP_ACTIVE_BT_LEN_MAX ( 250000 ) #define CFG_BTC_SAP_ACTIVE_BT_LEN_DEFAULT ( 30000 ) #define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_NAME "gObssScanActiveDwellTime" #define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_MIN ( 5 ) #define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_MAX ( 1000 ) #define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_DEFAULT ( 10 ) #define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_NAME "gObssScanPassiveDwellTime" #define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_MIN ( 10 ) #define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_MAX ( 1000 ) #define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_DEFAULT ( 20 ) #define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_NAME "gObssScanWidthTriggerInterval" #define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_MIN ( 10 ) #define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_MAX ( 900 ) #define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_DEFAULT ( 200 ) /* RPS configurations */ #define CFG_RPS_CPU_MAP_MIN (0) #define CFG_RPS_CPU_MAP_MAX (0xff) #define CFG_RPS_CPU_MAP_NAME "rps_mask" #define CFG_RPS_CPU_MAP_DEFAULT (0x00) #define CFG_MULTICAST_HOST_FW_MSGS "gMulticastHostMsgs" #define CFG_MULTICAST_HOST_FW_MSGS_MIN (0) #define CFG_MULTICAST_HOST_FW_MSGS_MAX (1) #define CFG_MULTICAST_HOST_FW_MSGS_DEFAULT (1) #define CFG_ENABLE_TCP_DELACK_NAME "gEnableDelAck" #define CFG_ENABLE_TCP_DELACK_MIN (0) #define CFG_ENABLE_TCP_DELACK_MAX (1) #define CFG_ENABLE_TCP_DELACK_DEFAULT (1) #define CFG_BTC_2M_DYN_LONG_WLAN_LEN_NAME "gBTC2MDynLongWLAN" #define CFG_BTC_2M_DYN_LONG_WLAN_LEN_MIN (15000) #define CFG_BTC_2M_DYN_LONG_WLAN_LEN_MAX (55000) #define CFG_BTC_2M_DYN_LONG_WLAN_LEN_DEFAULT (35000) #define CFG_BTC_2M_DYN_LONG_BT_LEN_NAME "gBTC2MDynLongBT" #define CFG_BTC_2M_DYN_LONG_BT_LEN_MIN (15000) #define CFG_BTC_2M_DYN_LONG_BT_LEN_MAX (25000) #define CFG_BTC_2M_DYN_LONG_BT_LEN_DEFAULT (25000) #define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_NAME "gBTC2MDynLongBTExt" #define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_MIN (5000) #define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_MAX (15000) #define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_DEFAULT (15000) #define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_NAME "gBTC2MDynLongNumBTExt" #define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_MIN (5) #define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_MAX (15) #define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_DEFAULT (15) #ifdef SAP_AUTH_OFFLOAD /* Enable/Disable SAP Authentication offload * Default: enable */ #define CFG_ENABLE_SAP_AUTH_OFL_NAME "gEnableSAPAuthOffload" #define CFG_ENABLE_SAP_AUTH_OFL_MIN ( 0 ) #define CFG_ENABLE_SAP_AUTH_OFL_MAX ( 1 ) #define CFG_ENABLE_SAP_AUTH_OFL_DEFAULT ( 1 ) /* SAP Authentication offload Security Type * 0: None Security * 1: WPA2-PSK CCMP */ #define CFG_SAP_AUTH_OFL_SECURITY_TYPE_NAME "gSAPAuthOffloadSec" #define CFG_SAP_AUTH_OFL_SECURITY_TYPE_MIN ( 0 ) #define CFG_SAP_AUTH_OFL_SECURITY_TYPE_MAX ( 1 ) #define CFG_SAP_AUTH_OFL_SECURITY_TYPE_DEFAULT ( 0 ) /* SAP Authentication offload Security Key */ #define CFG_SAP_AUTH_OFL_KEY_NAME "gSAPAuthOffloadKey" #define CFG_SAP_AUTH_OFL_KEY_DEFAULT "" #endif /* SAP_AUTH_OFFLOAD */ /* In cfg.dat 1=1MBPS, 2=2MBPS, 3=5_5MBPS, 4=11MBPS, 5=6MBPS, 6=9MBPS, * 7=12MBPS, 8=18MBPS, 9=24MBPS. But 6=9MBPS and 8=18MBPS are not basic * 11g rates and should not be set by gDefaultRateIndex24Ghz. So instead * of using index 1-9 we will use 1-7 and if user set gDefaultRateIndex24Ghz=6 * set 7=12MBPS in CFG and if user set gDefaultRateIndex24Ghz=7 set * 9=24MBPS in CFG. */ #define HDD_DEFAULT_RATE_12MBPS 6 #define HDD_DEFAULT_RATE_24MBPS 7 #define CFG_DEFAULT_RATE_12MBPS 7 #define CFG_DEFAULT_RATE_24MBPS 9 #define CFG_DEFAULT_RATE_INDEX_24GH "gDefaultRateIndex24Ghz" #define CFG_DEFAULT_RATE_INDEX_24GH_MIN ( 1 ) #define CFG_DEFAULT_RATE_INDEX_24GH_MAX ( 7 ) #define CFG_DEFAULT_RATE_INDEX_24GH_DEFAULT ( 1 ) /* * This INI item is used to control subsystem restart(SSR) test framework * Set its value to 1 to enable APPS trigerred SSR testing */ #define CFG_ENABLE_CRASH_INJECT "gEnableForceTargetAssert" #define CFG_ENABLE_CRASH_INJECT_MIN (0) #define CFG_ENABLE_CRASH_INJECT_MAX (1) #define CFG_ENABLE_CRASH_INJECT_DEFAULT (0) static __inline tANI_U32 defHddRateToDefCfgRate( tANI_U32 defRateIndex ) { switch(defRateIndex){ case HDD_DEFAULT_RATE_12MBPS: return CFG_DEFAULT_RATE_12MBPS; break; case HDD_DEFAULT_RATE_24MBPS: return CFG_DEFAULT_RATE_24MBPS; break; default: return defRateIndex; } } /* * VOS Trace Enable Control * Notes: * the MIN/MAX/DEFAULT values apply for all modules * the DEFAULT value is outside the valid range. if the DEFAULT * value is not overridden, then no change will be made to the * "built in" default values compiled into the code * values are a bitmap indicating which log levels are to enabled * (must match order of vos_trace_level enumerations) * 00000001 FATAL * 00000010 ERROR * 00000100 WARN * 00001000 INFO * 00010000 INFO HIGH * 00100000 INFO MED * 01000000 INFO LOW * 10000000 DEBUG * * hence a value of 0xFF would set all bits (enable all logs) */ #define CFG_VOS_TRACE_ENABLE_BAP_NAME "vosTraceEnableBAP" #define CFG_VOS_TRACE_ENABLE_TL_NAME "vosTraceEnableTL" #define CFG_VOS_TRACE_ENABLE_WDI_NAME "vosTraceEnableWDI" #define CFG_VOS_TRACE_ENABLE_HDD_NAME "vosTraceEnableHDD" #define CFG_VOS_TRACE_ENABLE_SME_NAME "vosTraceEnableSME" #define CFG_VOS_TRACE_ENABLE_PE_NAME "vosTraceEnablePE" #define CFG_VOS_TRACE_ENABLE_PMC_NAME "vosTraceEnablePMC" #define CFG_VOS_TRACE_ENABLE_WDA_NAME "vosTraceEnableWDA" #define CFG_VOS_TRACE_ENABLE_SYS_NAME "vosTraceEnableSYS" #define CFG_VOS_TRACE_ENABLE_VOSS_NAME "vosTraceEnableVOSS" #define CFG_VOS_TRACE_ENABLE_SAP_NAME "vosTraceEnableSAP" #define CFG_VOS_TRACE_ENABLE_HDD_SAP_NAME "vosTraceEnableHDDSAP" #define CFG_VOS_TRACE_ENABLE_MIN (0) #define CFG_VOS_TRACE_ENABLE_MAX (0xff) #define CFG_VOS_TRACE_ENABLE_DEFAULT (0xffff) /* * WDI Trace Enable Control * Notes: * the MIN/MAX/DEFAULT values apply for all modules * the DEFAULT value is outside the valid range. if the DEFAULT * value is not overridden, then no change will be made to the * "built in" default values compiled into the code * values are a bitmap indicating which log levels are to enabled * (must match order of wpt_tracelevel enumerations) * 00000001 FATAL * 00000010 ERROR * 00000100 WARN * 00001000 INFO * 00010000 INFO HIGH * 00100000 INFO MED * 01000000 INFO LOW * * hence a value of 0x7F would set all bits (enable all logs) */ #define CFG_WDI_TRACE_ENABLE_DAL_NAME "wdiTraceEnableDAL" #define CFG_WDI_TRACE_ENABLE_CTL_NAME "wdiTraceEnableCTL" #define CFG_WDI_TRACE_ENABLE_DAT_NAME "wdiTraceEnableDAT" #define CFG_WDI_TRACE_ENABLE_PAL_NAME "wdiTraceEnablePAL" #define CFG_WDI_TRACE_ENABLE_MIN (0) #define CFG_WDI_TRACE_ENABLE_MAX (0x7f) #define CFG_WDI_TRACE_ENABLE_DEFAULT (0xffffffff) #define HDD_MCASTBCASTFILTER_FILTER_NONE 0x00 #define HDD_MCASTBCASTFILTER_FILTER_ALL_MULTICAST 0x01 #define HDD_MCASTBCASTFILTER_FILTER_ALL_BROADCAST 0x02 #define HDD_MCASTBCASTFILTER_FILTER_ALL_MULTICAST_BROADCAST 0x03 #define HDD_MULTICAST_FILTER_LIST 0x04 /* * * SAP Auto Channel Enable * Notes: * Auto Channel selection for SAP configuration * 0 - Disable Auto Channel * 1 - Enable auto channel selection in auto mode. * When enable auto channel, channel provided by Supplicant will be ignored. * * Default configuration: Auto channel is disabled. */ #define CFG_SAP_AUTO_CHANNEL_SELECTION_NAME "gApAutoChannelSelection" #define CFG_SAP_AUTO_CHANNEL_SELECTION_MIN ( 0 ) #define CFG_SAP_AUTO_CHANNEL_SELECTION_MAX ( 1 ) #define CFG_SAP_AUTO_CHANNEL_SELECTION_DEFAULT ( 0 ) /* ACS Scan band preference * 0 -- No preference * 1 -- Scan 2.4G first * 2 -- Scan 5G first */ #define CFG_SAP_SCAN_BAND_PREFERENCE "gAcsScanBandPreference" #define CFG_SAP_SCAN_BAND_PREFERENCE_MIN (0) #define CFG_SAP_SCAN_BAND_PREFERENCE_MAX (2) #define CFG_SAP_SCAN_BAND_PREFERENCE_DEFAULT (0) #define CFG_ACS_BAND_SWITCH_THRESHOLD "gACSBandSwitchThreshold" #define CFG_ACS_BAND_SWITCH_THRESHOLD_MIN (0) #define CFG_ACS_BAND_SWITCH_THRESHOLD_MAX (4444) /* 2 BSS, maximus RSSI -90 */ #define CFG_ACS_BAND_SWITCH_THRESHOLD_DEFAULT (296) /*BMPS Logic * Notes: * 1 - Then Host driver and above layers control the PS mechanism * 0 - Diver/Core Stack internally control the Power saving mechanism */ #define CFG_ANDRIOD_POWER_SAVE_NAME "isAndroidPsEn" #define CFG_ANDRIOD_POWER_SAVE_MIN ( 0 ) #define CFG_ANDRIOD_POWER_SAVE_MAX ( 1 ) #define CFG_ANDRIOD_POWER_SAVE_DEFAULT ( 0 ) /* * Enable Dynamic DTIM * Options * 0 -Disable DynamicDTIM * 1 to 5 - SLM will switch to DTIM specified here when host suspends and * switch DTIM1 when host resumes */ #define CFG_ENABLE_DYNAMIC_DTIM_NAME "gEnableDynamicDTIM" #define CFG_ENABLE_DYNAMIC_DTIM_MIN ( 0 ) #define CFG_ENABLE_DYNAMIC_DTIM_MAX ( 5 ) #define CFG_ENABLE_DYNAMIC_DTIM_DEFAULT ( 0 ) /* * Enable First Scan 2G Only * Options * 0 - Disable First Scan 2G Option * 1 - Enable First Scan 2G Option */ #define CFG_ENABLE_FIRST_SCAN_2G_ONLY_NAME "gEnableFirstScan2GOnly" #define CFG_ENABLE_FIRST_SCAN_2G_ONLY_MIN ( 0 ) #define CFG_ENABLE_FIRST_SCAN_2G_ONLY_MAX ( 1 ) #define CFG_ENABLE_FIRST_SCAN_2G_ONLY_DEFAULT ( 0 ) /* * Skip DFS Channel in case of P2P Search * Options * 0 - Don't Skip DFS Channel in case of P2P Search * 1 - Skip DFS Channel in case of P2P Search */ #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_NAME "gSkipDfsChannelInP2pSearch" #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_MIN ( 0 ) #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_MAX ( 1 ) #define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_DEFAULT ( 1 ) /* * Ignore Dynamic Dtim in case of P2P * Options * 0 - Consider Dynamic Dtim incase of P2P * 1 - Ignore Dynamic Dtim incase of P2P */ #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_NAME "gIgnoreDynamicDtimInP2pMode" #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_MIN ( 0 ) #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_MAX ( 1 ) #define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_DEFAULT ( 0 ) #define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_NAME "gEnableAutomaticTxPowerControl" #define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_MIN ( 0 ) #define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_MAX ( 1 ) #define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_DEFAULT ( 1 ) #define CFG_SHORT_GI_40MHZ_NAME "gShortGI40Mhz" #define CFG_SHORT_GI_40MHZ_MIN 0 #define CFG_SHORT_GI_40MHZ_MAX 1 #define CFG_SHORT_GI_40MHZ_DEFAULT 1 /* * Enable / Disable MCC feature * Default: Enable */ #define CFG_ENABLE_MCC_ENABLED_NAME "gEnableMCCMode" #define CFG_ENABLE_MCC_ENABLED_MIN ( 0 ) #define CFG_ENABLE_MCC_ENABLED_MAX ( 1 ) #define CFG_ENABLE_MCC_ENABLED_DEFAULT ( 1 ) /* * Allow GO in MCC mode to accept different beacon interval than STA's. * Added for Wi-Fi Cert. 5.1.12 * Default: gAllowMCCGODiffBI = 2 * If gAllowMCCGODiffBI = 1 // Set to 1 for WFA certification. GO Beacon * interval is not changed. MCC GO * doesn't work well in optimized way. * In worst scenario, it may invite STA * disconnection. * gAllowMCCGODiffBI = 2 //If set to 2 workaround 1 disassoc all the clients * and update beacon Interval * gAllowMCCGODiffBI = 3 //If set to 3 tear down the P2P link in auto/ * Non-autonomous -GO case * gAllowMCCGODiffBI = 4 //If set to 4 don't disconnect the P2P client * in autonomous/Non-autonomous -GO case update * the BI dynamically */ #define CFG_ALLOW_MCC_GO_DIFF_BI_NAME "gAllowMCCGODiffBI" #define CFG_ALLOW_MCC_GO_DIFF_BI_MIN ( 0 ) #define CFG_ALLOW_MCC_GO_DIFF_BI_MAX ( 4 ) #define CFG_ALLOW_MCC_GO_DIFF_BI_DEFAULT ( 4 ) /* * Enable/Disable Thermal Mitigation feature * Default: Disable */ #define CFG_THERMAL_MIGRATION_ENABLE_NAME "gThermalMitigationEnable" #define CFG_THERMAL_MIGRATION_ENABLE_MIN ( 0 ) #define CFG_THERMAL_MIGRATION_ENABLE_MAX ( 1 ) #define CFG_THERMAL_MIGRATION_ENABLE_DEFAULT ( 1 ) /* * Enable/Disable Modulated DTIM feature * Default: Disable */ #define CFG_ENABLE_MODULATED_DTIM_NAME "gEnableModulatedDTIM" #define CFG_ENABLE_MODULATED_DTIM_MIN ( 0 ) #define CFG_ENABLE_MODULATED_DTIM_MAX ( 5 ) #define CFG_ENABLE_MODULATED_DTIM_DEFAULT ( 0 ) /* * Enable/Disable Multicast MAC Address List feature * Default: Disable */ #define CFG_MC_ADDR_LIST_ENABLE_NAME "gMCAddrListEnable" #define CFG_MC_ADDR_LIST_ENABLE_MIN ( 0 ) #define CFG_MC_ADDR_LIST_ENABLE_MAX ( 1 ) #define CFG_MC_ADDR_LIST_ENABLE_DEFAULT ( 0 ) /* Set number of buffers to be advertised during ADDBA negotiation*/ #define CFG_NUM_BUFF_ADVERT_NAME "gNumBuffAdvert" #define CFG_NUM_BUFF_ADVERT_MIN ( 0 ) #define CFG_NUM_BUFF_ADVERT_MAX ( 128 ) #define CFG_NUM_BUFF_ADVERT_DEFAULT ( 64 ) /* * Allow MCC to modify config */ #define CFG_MCC_CONFIG_PARAM_NAME "gMccAllowCfgModify" #define CFG_MCC_CONFIG_PARAM_MIN ( 0x0000 ) #define CFG_MCC_CONFIG_PARAM_MAX ( 0x01ff ) #define CFG_MCC_CONFIG_PARAM_DEFAULT ( 0x000C ) #define CFG_ENABLE_RX_STBC "gEnableRXSTBC" #define CFG_ENABLE_RX_STBC_MIN ( 0 ) #define CFG_ENABLE_RX_STBC_MAX ( 1 ) #define CFG_ENABLE_RX_STBC_DEFAULT ( 1 ) #define CFG_ENABLE_TX_STBC "gEnableTXSTBC" #define CFG_ENABLE_TX_STBC_MIN ( 0 ) #define CFG_ENABLE_TX_STBC_MAX ( 1 ) #define CFG_ENABLE_TX_STBC_DEFAULT ( 1 ) /* * Enable/Disable vsta based on MAX Assoc limit * defined in WCNSS_qcom_cfg.ini. */ #ifdef WLAN_SOFTAP_VSTA_FEATURE #define CFG_VSTA_SUPPORT_ENABLE "gEnableVSTASupport" #define CFG_VSTA_SUPPORT_ENABLE_MIN ( 0 ) #define CFG_VSTA_SUPPORT_ENABLE_MAX ( 1 ) #define CFG_VSTA_SUPPORT_ENABLE_DEFAULT ( 0 ) #endif #ifdef FEATURE_WLAN_TDLS #define CFG_TDLS_SUPPORT_ENABLE "gEnableTDLSSupport" #define CFG_TDLS_SUPPORT_ENABLE_MIN ( 0 ) #define CFG_TDLS_SUPPORT_ENABLE_MAX ( 1 ) #define CFG_TDLS_SUPPORT_ENABLE_DEFAULT ( 0 ) #define CFG_TDLS_IMPLICIT_TRIGGER "gEnableTDLSImplicitTrigger" #define CFG_TDLS_IMPLICIT_TRIGGER_MIN ( 0 ) #define CFG_TDLS_IMPLICIT_TRIGGER_MAX ( 1 ) #define CFG_TDLS_IMPLICIT_TRIGGER_DEFAULT ( 0 ) #define CFG_TDLS_TX_STATS_PERIOD "gTDLSTxStatsPeriod" #define CFG_TDLS_TX_STATS_PERIOD_MIN (1000) #define CFG_TDLS_TX_STATS_PERIOD_MAX ( 4294967295UL ) #define CFG_TDLS_TX_STATS_PERIOD_DEFAULT (2000) #define CFG_TDLS_TX_PACKET_THRESHOLD "gTDLSTxPacketThreshold" #define CFG_TDLS_TX_PACKET_THRESHOLD_MIN ( 0 ) #define CFG_TDLS_TX_PACKET_THRESHOLD_MAX ( 4294967295UL ) #define CFG_TDLS_TX_PACKET_THRESHOLD_DEFAULT (40) #define CFG_TDLS_DISCOVERY_PERIOD "gTDLSDiscoveryPeriod" #define CFG_TDLS_DISCOVERY_PERIOD_MIN ( 5000 ) #define CFG_TDLS_DISCOVERY_PERIOD_MAX ( 4294967295UL ) #define CFG_TDLS_DISCOVERY_PERIOD_DEFAULT ( 20000 ) #define CFG_TDLS_MAX_DISCOVERY_ATTEMPT "gTDLSMaxDiscoveryAttempt" #define CFG_TDLS_MAX_DISCOVERY_ATTEMPT_MIN ( 1 ) #define CFG_TDLS_MAX_DISCOVERY_ATTEMPT_MAX ( 100 ) #define CFG_TDLS_MAX_DISCOVERY_ATTEMPT_DEFAULT (5) #define CFG_TDLS_IDLE_TIMEOUT "gTDLSIdleTimeout" #define CFG_TDLS_IDLE_TIMEOUT_MIN ( 2000 ) #define CFG_TDLS_IDLE_TIMEOUT_MAX ( 40000 ) #define CFG_TDLS_IDLE_TIMEOUT_DEFAULT ( 5000 ) #define CFG_TDLS_IDLE_PACKET_THRESHOLD "gTDLSIdlePacketThreshold" #define CFG_TDLS_IDLE_PACKET_THRESHOLD_MIN ( 0 ) #define CFG_TDLS_IDLE_PACKET_THRESHOLD_MAX ( 40000 ) #define CFG_TDLS_IDLE_PACKET_THRESHOLD_DEFAULT ( 5 ) #define CFG_TDLS_RSSI_HYSTERESIS "gTDLSRssiHysteresis" #define CFG_TDLS_RSSI_HYSTERESIS_MIN ( 0 ) #define CFG_TDLS_RSSI_HYSTERESIS_MAX ( 100 ) #define CFG_TDLS_RSSI_HYSTERESIS_DEFAULT ( 100 ) #define CFG_TDLS_RSSI_TRIGGER_THRESHOLD "gTDLSRSSITriggerThreshold" #define CFG_TDLS_RSSI_TRIGGER_THRESHOLD_MIN ( -120 ) #define CFG_TDLS_RSSI_TRIGGER_THRESHOLD_MAX ( 0 ) #define CFG_TDLS_RSSI_TRIGGER_THRESHOLD_DEFAULT ( -75 ) #define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD "gTDLSRSSITeardownThreshold" #define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD_MIN ( -120 ) #define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD_MAX ( 0 ) #define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD_DEFAULT ( -75 ) #define CFG_TDLS_QOS_WMM_UAPSD_MASK_NAME "gTDLSUapsdMask" // ACs to setup U-APSD for TDLS Sta #define CFG_TDLS_QOS_WMM_UAPSD_MASK_MIN (0) #define CFG_TDLS_QOS_WMM_UAPSD_MASK_MAX (15) #define CFG_TDLS_QOS_WMM_UAPSD_MASK_DEFAULT (0) #define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE "gEnableTDLSBufferSta" #define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE_MIN (0) #define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE_MAX (1) #define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE_DEFAULT (1) #define CFG_TDLS_PUAPSD_INACTIVITY_TIME "gTDLSPuapsdInactivityTime" #define CFG_TDLS_PUAPSD_INACTIVITY_TIME_MIN (0) #define CFG_TDLS_PUAPSD_INACTIVITY_TIME_MAX (10) #define CFG_TDLS_PUAPSD_INACTIVITY_TIME_DEFAULT (0) #define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD "gTDLSPuapsdRxFrameThreshold" #define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD_MIN (10) #define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD_MAX (20) #define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD_DEFAULT (10) #define CFG_TDLS_EXTERNAL_CONTROL "gTDLSExternalControl" #define CFG_TDLS_EXTERNAL_CONTROL_MIN (0) #define CFG_TDLS_EXTERNAL_CONTROL_MAX (1) #define CFG_TDLS_EXTERNAL_CONTROL_DEFAULT (1) #define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE "gEnableTDLSOffChannel" #define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE_MIN (0) #define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE_MAX (1) #define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE_DEFAULT (1) #define CFG_TDLS_WMM_MODE_ENABLE "gEnableTDLSWmmMode" #define CFG_TDLS_WMM_MODE_ENABLE_MIN (0) #define CFG_TDLS_WMM_MODE_ENABLE_MAX (1) #define CFG_TDLS_WMM_MODE_ENABLE_DEFAULT (1) #define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE "gEnableTDLSScanCoexistence" #define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE_MIN (0) #define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE_MAX (1) #define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE_DEFAULT (0) /* Enable/Disable Consecutive Beacon miss */ #define CFG_ENABLE_CONSECUTIVE_BMISS_NAME "gEnableConcBmiss" #define CFG_ENABLE_CONSECUTIVE_BMISS_MIN ( 2 ) #define CFG_ENABLE_CONSECUTIVE_BMISS_MAX ( 10 ) #define CFG_ENABLE_CONSECUTIVE_BMISS_DEFAULT ( 5 ) /* Enable/Disable units of beacon wait time */ #define CFG_ENABLE_UNITS_BEACON_WAIT_NAME "gEnableUnitBwait" #define CFG_ENABLE_UNITS_BEACON_WAIT_MIN ( 2 ) #define CFG_ENABLE_UNITS_BEACON_WAIT_MAX ( 10 ) #define CFG_ENABLE_UNITS_BEACON_WAIT_DEFAULT ( 2 ) /* if gEnableTDLSScan * 0: Same as gEnableTDLSScanCoexistence ; driver will do disconnect if * Peer is not buffer STA capable. * 1: Dut will scan in all cases. * 2: If peer is not buffer STA capable, use CTS2self to do scan. */ #define CFG_TDLS_SCAN_ENABLE "gEnableTDLSScan" #define CFG_TDLS_SCAN_ENABLE_MIN (0) #define CFG_TDLS_SCAN_ENABLE_MAX (2) #define CFG_TDLS_SCAN_ENABLE_DEFAULT (1) #define CFG_TDLS_ENABLE_DEFER_TIMER "gTDLSEnableDeferTime" #define CFG_TDLS_ENABLE_DEFER_TIMER_MIN (2000) #define CFG_TDLS_ENABLE_DEFER_TIMER_MAX (6000) #define CFG_TDLS_ENABLE_DEFER_TIMER_DEFAULT (5000) #endif #ifdef WLAN_FEATURE_LINK_LAYER_STATS #define CFG_LINK_LAYER_STATS_ENABLE "gEnableLLStats" #define CFG_LINK_LAYER_STATS_ENABLE_MIN (0) #define CFG_LINK_LAYER_STATS_ENABLE_MAX (1) #define CFG_LINK_LAYER_STATS_ENABLE_DEFAULT (1) #endif #ifdef WLAN_FEATURE_EXTSCAN #define CFG_EXTSCAN_ENABLE "gEnableEXTScan" #define CFG_EXTSCAN_ENABLE_MIN (0) #define CFG_EXTSCAN_ENABLE_MAX (1) #define CFG_EXTSCAN_ENABLE_DEFAULT (1) #endif #ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE #define CFG_ACTIVEMODE_OFFLOAD_ENABLE "gEnableActiveModeOffload" #define CFG_ACTIVEMODE_OFFLOAD_ENABLE_MIN ( 0 ) #define CFG_ACTIVEMODE_OFFLOAD_ENABLE_MAX ( 1 ) #define CFG_ACTIVEMODE_OFFLOAD_ENABLE_DEFAULT ( 1 ) #endif /* Enable/Disable LPWR Image(cMEM uBSP) Transition */ #define CFG_ENABLE_LPWR_IMG_TRANSITION_NAME "gEnableLpwrImgTransition" #define CFG_ENABLE_LPWR_IMG_TRANSITION_MIN ( 0 ) #define CFG_ENABLE_LPWR_IMG_TRANSITION_MAX ( 1 ) #define CFG_ENABLE_LPWR_IMG_TRANSITION_DEFAULT ( 1 ) /* * Scan Aging timeout value in seconds */ #define CFG_SCAN_AGING_PARAM_NAME "gScanAgingTime" #define CFG_SCAN_AGING_PARAM_MIN ( 0 ) #define CFG_SCAN_AGING_PARAM_MAX ( 200 ) #define CFG_SCAN_AGING_PARAM_DEFAULT ( 60 ) /* Config Param to enable the txLdpc capability * 0 - disable * 1 - HT LDPC enable * 2 - VHT LDPC enable * 3 - HT & VHT LDPC enable */ #define CFG_TX_LDPC_ENABLE_FEATURE "gTxLdpcEnable" #define CFG_TX_LDPC_ENABLE_FEATURE_MIN ( 0 ) #define CFG_TX_LDPC_ENABLE_FEATURE_MAX ( 3 ) #define CFG_TX_LDPC_ENABLE_FEATURE_DEFAULT ( 0 ) /* * Enable / Disable MCC Adaptive Scheduler feature * Default: Enable */ #define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_NAME "gEnableMCCAdaptiveScheduler" #define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_MIN ( 0 ) #define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_MAX ( 1 ) #define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_DEFAULT ( 1 ) #ifdef WLAN_FEATURE_11AC #define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE "gTxBFEnable" #define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE_MIN ( WNI_CFG_VHT_SU_BEAMFORMEE_CAP_STAMIN ) #define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE_MAX ( WNI_CFG_VHT_SU_BEAMFORMEE_CAP_STAMAX ) #define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE_DEFAULT ( WNI_CFG_VHT_SU_BEAMFORMEE_CAP_STADEF ) #define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED "gTxBFCsnValue" #define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_MIN ( WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_STAMIN ) #define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_MAX ( WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_STAMAX - 1 ) #define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_DEFAULT ( WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_STAMAX - 1 ) #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE "gEnableMuBformee" #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_MIN ( 0 ) #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_MAX ( 1 ) #define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_DEFAULT ( 1 ) #define CFG_VHT_AMPDU_LEN_EXP_NAME "gVhtMaxAmpduLenExp" #define CFG_VHT_AMPDU_LEN_EXP_MIN ( 0 ) #define CFG_VHT_AMPDU_LEN_EXP_MAX ( 7 ) #define CFG_VHT_AMPDU_LEN_EXP_DEFAULT ( 7 ) #endif /* * SAP ALLOW All Channels */ #define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_NAME "gSapAllowAllChannel" #define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_MIN ( 0 ) #define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_MAX ( 1 ) #define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_DEFAULT ( 0 ) #ifdef WLAN_FEATURE_11AC #define CFG_DISABLE_LDPC_WITH_TXBF_AP "gDisableLDPCWithTxbfAP" #define CFG_DISABLE_LDPC_WITH_TXBF_AP_MIN ( 0 ) #define CFG_DISABLE_LDPC_WITH_TXBF_AP_MAX ( 1 ) #define CFG_DISABLE_LDPC_WITH_TXBF_AP_DEFAULT ( 0 ) #endif #define CFG_LIST_OF_NON_DFS_COUNTRY_CODE "gListOfNonDfsCountryCode" #define CFG_LIST_OF_NON_DFS_COUNTRY_CODE_DEFAULT "JO,MA" /* * IBSS Operating Channels for 2.4G and 5GHz channels */ #define CFG_IBSS_ADHOC_CHANNEL_5GHZ_NAME "gAdHocChannel5G" #define CFG_IBSS_ADHOC_CHANNEL_5GHZ_MIN ( 36 ) #define CFG_IBSS_ADHOC_CHANNEL_5GHZ_MAX ( 165 ) #define CFG_IBSS_ADHOC_CHANNEL_5GHZ_DEFAULT ( 44 ) #define CFG_IBSS_ADHOC_CHANNEL_24GHZ_NAME "gAdHocChannel24G" #define CFG_IBSS_ADHOC_CHANNEL_24GHZ_MIN ( 1 ) #define CFG_IBSS_ADHOC_CHANNEL_24GHZ_MAX ( 14 ) #define CFG_IBSS_ADHOC_CHANNEL_24GHZ_DEFAULT ( 6 ) #define CFG_LIST_OF_NON_11AC_COUNTRY_CODE "gListOfNon11acCountryCode" #define CFG_LIST_OF_NON_11AC_COUNTRY_CODE_DEFAULT "RU,UA,ZA" /* Parameter to control VHT support in 2.4 GHz band */ #define CFG_ENABLE_VHT_FOR_24GHZ_NAME "gEnableVhtFor24GHzBand" #define CFG_ENABLE_VHT_FOR_24GHZ_MIN (0) #define CFG_ENABLE_VHT_FOR_24GHZ_MAX (1) #define CFG_ENABLE_VHT_FOR_24GHZ_DEFAULT (0) #define CFG_MAX_MEDIUM_TIME "gMaxMediumTime" #define CFG_MAX_MEDIUM_TIME_STAMIN WNI_CFG_MAX_MEDIUM_TIME_STAMIN #define CFG_MAX_MEDIUM_TIME_STAMAX WNI_CFG_MAX_MEDIUM_TIME_STAMAX #define CFG_MAX_MEDIUM_TIME_STADEFAULT WNI_CFG_MAX_MEDIUM_TIME_STADEF /* * SAP/P2P-GO mode traffic monitor */ #define CFG_ENABLE_TRAFFIC_MONITOR "gEnableTrafficMonitor" #define CFG_ENABLE_TRAFFIC_MONITOR_MIN ( 0 ) #define CFG_ENABLE_TRAFFIC_MONITOR_MAX ( 1 ) #define CFG_ENABLE_TRAFFIC_MONITOR_DEFAULT ( 0 ) #define CFG_TRAFFIC_IDLE_TIMEOUT "gTrafficIdleTimeout" #define CFG_TRAFFIC_IDLE_TIMEOUT_MIN ( 3000 ) #define CFG_TRAFFIC_IDLE_TIMEOUT_MAX ( 10000 ) #define CFG_TRAFFIC_IDLE_TIMEOUT_DEFAULT ( 5000 ) /* * SCAN Offload */ #define CFG_SCAN_OFFLOAD_NAME "gEnableDirectedScanOffload" #define CFG_SCAN_OFFLOAD_DISABLE ( 0 ) #define CFG_SCAN_OFFLOAD_ENABLE ( 1 ) #define CFG_SCAN_OFFLOAD_DEFAULT ( CFG_SCAN_OFFLOAD_DISABLE ) /* * Enable legacy fast roaming (LFR) on STA link during concurrent sessions */ #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD #define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY "gEnableFastRoamInConcurrency" #define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY_MIN ( 0 ) #define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY_MAX ( 1 ) #define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY_DEFAULT ( 1 ) #endif /* * FlexConnectPowerFactor parameter * Default: Disable (0) */ #define CFG_FLEX_CONNECT_POWER_FACTOR_NAME "gFlexConnectPowerFactor" #define CFG_FLEX_CONNECT_POWER_FACTOR_MIN ( 0 ) #define CFG_FLEX_CONNECT_POWER_FACTOR_MAX ( 9 ) #define CFG_FLEX_CONNECT_POWER_FACTOR_DEFAULT ( 0 ) /* * Enable heart beat monitoring offload to FW */ #define CFG_ENABLE_HEART_BEAT_OFFLOAD "gEnableIbssHeartBeatOffload" #define CFG_ENABLE_HEART_BEAT_OFFLOAD_MIN ( 0 ) #define CFG_ENABLE_HEART_BEAT_OFFLOAD_MAX ( 1 ) #define CFG_ENABLE_HEART_BEAT_OFFLOAD_DEFAULT ( 1 ) #define CFG_ANTENNA_DIVERSITY_PARAM_NAME "gAntennaDiversity" #define CFG_ANTENNA_DIVERSITY_PARAM_MIN ( 0 ) #define CFG_ANTENNA_DIVERSITY_PARAM_MAX ( 3 ) #define CFG_ANTENNA_DIVERSITY_PARAM_DEFAULT ( 0 ) #define CFG_ENABLE_SNR_MONITORING_NAME "gEnableSNRMonitoring" #define CFG_ENABLE_SNR_MONITORING_MIN ( 0 ) #define CFG_ENABLE_SNR_MONITORING_MAX ( 1 ) #define CFG_ENABLE_SNR_MONITORING_DEFAULT ( 0 ) //Macro to enable/disable dynamic timer #define CFG_DYNAMIC_SPLIT_SCAN_NAME "gEnableDynSplitScan" #define CFG_DYNAMIC_SPLIT_SCAN_MIN ( 0 ) #define CFG_DYNAMIC_SPLIT_SCAN_MAX ( 1 ) #define CFG_DYNAMIC_SPLIT_SCAN_DEFAULT ( 1 ) //Macro to monitor the packet count #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_NAME "gSplitScanTxRxThreshold" #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_MIN ( 10 ) #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_MAX ( 100 ) #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_DEFAULT ( 50 ) //Macro to handle the monitor timer value in milliseconds #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_NAME "gSplitScanTxRxTimer" #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_MIN ( 1000 ) #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_MAX ( 10000 ) #define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_DEFAULT ( 5000 ) #ifdef FEATURE_WLAN_SCAN_PNO #define CFG_PNO_SCAN_SUPPORT "gPNOScanSupport" #define CFG_PNO_SCAN_SUPPORT_ENABLE ( 1 ) #define CFG_PNO_SCAN_SUPPORT_DISABLE ( 0 ) #define CFG_PNO_SCAN_SUPPORT_DEFAULT ( 1 ) #define CFG_PNO_SCAN_TIMER_REPEAT_VALUE "gPNOScanTimerRepeatValue" #define CFG_PNO_SCAN_TIMER_REPEAT_VALUE_DEFAULT ( 6 ) #define CFG_PNO_SCAN_TIMER_REPEAT_VALUE_MIN ( 0 ) #define CFG_PNO_SCAN_TIMER_REPEAT_VALUE_MAX ( 0xffffffff ) #endif /* Not supporting this feature in pronto */ #define CFG_AMSDU_SUPPORT_IN_AMPDU_NAME "gAmsduSupportInAMPDU" #define CFG_AMSDU_SUPPORT_IN_AMPDU_MIN (0) #define CFG_AMSDU_SUPPORT_IN_AMPDU_MAX (0) #define CFG_AMSDU_SUPPORT_IN_AMPDU_DEFAULT (0) //disabled /* Prefer connecting to 5G AP even if its RSSI is lower by gSelect5GHzMargin dBm than 2.4G AP. This feature requires the dependent cfg.ini "gRoamPrefer5GHz" set to 1 */ #define CFG_STRICT_5GHZ_PREF_BY_MARGIN "gSelect5GHzMargin" #define CFG_STRICT_5GHZ_PREF_BY_MARGIN_MIN (0) #define CFG_STRICT_5GHZ_PREF_BY_MARGIN_MAX (60) #define CFG_STRICT_5GHZ_PREF_BY_MARGIN_DEFAULT (0) //set 0 to disable #define CFG_COALESING_IN_IBSS_NAME "gCoalesingInIBSS" #define CFG_COALESING_IN_IBSS_MIN (0) #define CFG_COALESING_IN_IBSS_MAX (1) #define CFG_COALESING_IN_IBSS_DEFAULT (0) //disabled #define CFG_DISABLE_ATH_NAME "gAthDisable" #define CFG_DISABLE_ATH_MIN (0) #define CFG_DISABLE_ATH_MAX (1) #define CFG_DISABLE_ATH_DEFAULT (0) //Enable Memory Debug #ifdef MEMORY_DEBUG #define CFG_ENABLE_MEMORY_DEBUG_NAME "gEnableMemoryDebug" #define CFG_ENABLE_MEMORY_DEBUG_MIN (0) #define CFG_ENABLE_MEMORY_DEBUG_MAX (1) #define CFG_ENABLE_MEMORY_DEBUG_DEFAULT (0) #endif #define CFG_OVERRIDE_COUNTRY_CODE "gStaCountryCode" #define CFG_OVERRIDE_COUNTRY_CODE_DEFAULT "000" /*Once the period expires the RSSI will be compared with Threshold * and if needed trigger events will be raised */ #define CFG_ASD_PROBE_INTERVAL_NAME "gAsdProbeInterval" #define CFG_ASD_PROBE_INTERVAL_DEFAULT (50) #define CFG_ASD_PROBE_INTERVAL_MIN (1) #define CFG_ASD_PROBE_INTERVAL_MAX (500) /* RSSI Threshold used to trigger probing activity/selection process*/ #define CFG_ASD_TRIGGER_THRESHOLD_NAME "gAsdTriggerThreshold" #define CFG_ASD_TRIGGER_THRESHOLD_DEFAULT (-60) #define CFG_ASD_TRIGGER_THRESHOLD_MIN (-100) #define CFG_ASD_TRIGGER_THRESHOLD_MAX (-10) /*RSSI Hysteresis Threshold for RSSI-RTT*/ #define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_NAME "gAsdRTTRssiHystThreshold" #define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_DEFAULT (3) #define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_MIN (0) #define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_MAX (5) //Enable debug for remain on channel issues #define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_NAME "gDebugP2pRemainOnChannel" #define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_DEFAULT ( 0 ) #define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_MIN ( 0 ) #define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_MAX ( 1 ) #define CFG_CTS2S_DURING_BTC_SCO_NAME "btcCTS2SduringSCO" #define CFG_CTS2S_DURING_BTC_SCO_DEFAULT WNI_CFG_BTC_CTS2S_DURING_SCO_STADEF #define CFG_CTS2S_DURING_BTC_SCO_MIN WNI_CFG_BTC_CTS2S_DURING_SCO_STAMIN #define CFG_CTS2S_DURING_BTC_SCO_MAX WNI_CFG_BTC_CTS2S_DURING_SCO_STAMAX #define CFG_BTC_FAST_WLAN_CONN_PREF "gBtcFastWlanConnPref" #define CFG_BTC_FAST_WLAN_CONN_PREF_DEFAULT ( 1 ) #define CFG_BTC_FAST_WLAN_CONN_PREF_MIN ( 0 ) #define CFG_BTC_FAST_WLAN_CONN_PREF_MAX ( 5 ) #define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN "gBtcStaticOppWlanIdleWlanLen" #define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN_DEFAULT ( 30000 ) #define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN_MIN ( 0 ) #define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN_MAX ( 250000 ) #define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN "gBtcStaticOppWlanIdleBtLen" #define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN_DEFAULT ( 120000 ) #define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN_MIN ( 0 ) #define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN_MAX ( 250000 ) #define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL "gBtcDisableWlanLinkCritical" #define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL_DEFAULT ( 0 ) #define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL_MIN ( 0 ) #define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL_MAX ( 1 ) /* * Connection related log Enable/Disable. * 0x1 - Enable mgmt pkt logs (no probe req/rsp). * 0x2 - Enable EAPOL pkt logs. * 0x4 - Enable DHCP pkt logs. * 0x0 - Disable all the above connection related logs. */ #define CFG_ENABLE_DEBUG_CONNECT_ISSUE "gEnableDebugLog" #define CFG_ENABLE_DEBUG_CONNECT_ISSUE_MIN (0) #define CFG_ENABLE_DEBUG_CONNECT_ISSUE_MAX (0xFF) #define CFG_ENABLE_DEBUG_CONNECT_ISSUE_DEFAULT (0) #define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_NAME "gEnableStrictRegulatoryForFCC" #define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_MIN ( 0 ) #define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_MAX ( 1 ) #define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_DEFAULT ( 0 ) #define CFG_ADVERTISE_CONCURRENT_OPERATION_NAME "gAdvertiseConcurrentOperation" #define CFG_ADVERTISE_CONCURRENT_OPERATION_DEFAULT ( 1 ) #define CFG_ADVERTISE_CONCURRENT_OPERATION_MIN ( 0 ) #define CFG_ADVERTISE_CONCURRENT_OPERATION_MAX ( 1 ) #define CFG_RA_FILTER_ENABLE_NAME "gRAFilterEnable" #define CFG_RA_FILTER_ENABLE_DEFAULT (0) #define CFG_RA_FILTER_ENABLE_MIN (0) #define CFG_RA_FILTER_ENABLE_MAX (1) #define CFG_RA_RATE_LIMIT_INTERVAL_NAME "gRARateLimitInterval" #define CFG_RA_RATE_LIMIT_INTERVAL_DEFAULT (60) #define CFG_RA_RATE_LIMIT_INTERVAL_MIN (0) #define CFG_RA_RATE_LIMIT_INTERVAL_MAX (3600) #define CFG_ROAMING_DFS_CHANNEL_NAME "gAllowDFSChannelRoam" #define CFG_ROAMING_DFS_CHANNEL_MIN (0) #define CFG_ROAMING_DFS_CHANNEL_MAX (1) #define CFG_ROAMING_DFS_CHANNEL_DEFAULT (1) #define CFG_TCP_DELACK_COMPUTE_INTERVAL "gTcpDelAckComputeInterval" #define CFG_TCP_DELACK_COMPUTE_INTERVAL_DEFAULT ( 2000 ) #define CFG_TCP_DELACK_COMPUTE_INTERVAL_MIN ( 1000 ) #define CFG_TCP_DELACK_COMPUTE_INTERVAL_MAX ( 10000 ) #define CFG_TCP_DELACK_THRESHOLD_HIGH "gTcpDelAckThresholdHigh" #define CFG_TCP_DELACK_THRESHOLD_HIGH_DEFAULT ( 17000 ) #define CFG_TCP_DELACK_THRESHOLD_HIGH_MIN ( 1000 ) #define CFG_TCP_DELACK_THRESHOLD_HIGH_MAX ( 25000 ) #define CFG_TCP_DELACK_THRESHOLD_LOW "gTcpDelAckThresholdLow" #define CFG_TCP_DELACK_THRESHOLD_LOW_DEFAULT ( 12000 ) #define CFG_TCP_DELACK_THRESHOLD_LOW_MIN ( 0 ) #define CFG_TCP_DELACK_THRESHOLD_LOW_MAX ( 25000 ) #ifdef WLAN_LOGGING_SOCK_SVC_ENABLE //Enable WLAN Logging to app space #define CFG_WLAN_LOGGING_SUPPORT_NAME "wlanLoggingEnable" #define CFG_WLAN_LOGGING_SUPPORT_ENABLE ( 1 ) #define CFG_WLAN_LOGGING_SUPPORT_DISABLE ( 0 ) #define CFG_WLAN_LOGGING_SUPPORT_DEFAULT ( 1 ) //Enable FATAL and ERROR logs for kmsg console #define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_NAME "wlanLoggingFEToConsole" #define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_ENABLE ( 1 ) #define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_DISABLE ( 0 ) #define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_DEFAULT ( 1 ) //Number of buffers to be used for WLAN logging #define CFG_WLAN_LOGGING_NUM_BUF_NAME "wlanLoggingNumBuf" #define CFG_WLAN_LOGGING_NUM_BUF_MIN ( 4 ) #define CFG_WLAN_LOGGING_NUM_BUF_MAX ( 64 ) #define CFG_WLAN_LOGGING_NUM_BUF_DEFAULT ( 32 ) //Number of buffers to be used for WLAN logging #define CFG_WLAN_PKT_STATS_NUM_BUF_NAME "wlanPerPktStatsNumBuf" #define CFG_WLAN_PKT_STATS_NUM_BUF_MIN ( 4 ) #define CFG_WLAN_PKT_STATS_NUM_BUF_MAX ( 64 ) #define CFG_WLAN_PKT_STATS_NUM_BUF_DEFAULT ( 16 ) #endif //WLAN_LOGGING_SOCK_SVC_ENABLE //Enable PerPKT stats Logging #define CFG_WLAN_PKT_STATS_LOGGING_NAME "wlanPerPktStatsLogEnable" #define CFG_WLAN_PKT_STATS_LOGGING_ENABLE ( 1 ) #define CFG_WLAN_PKT_STATS_LOGGING_DISABLE ( 0 ) #define CFG_WLAN_PKT_STATS_LOGGING_DEFAULT ( 1 ) #define CFG_IGNORE_PEER_ERP_INFO_NAME "gIgnorePeerErpInfo" #define CFG_IGNORE_PEER_ERP_INFO_MIN ( 0 ) #define CFG_IGNORE_PEER_ERP_INFO_MAX ( 1 ) #define CFG_IGNORE_PEER_ERP_INFO_DEFAULT ( 0 ) #define CFG_IGNORE_PEER_HT_MODE_NAME "gIgnorePeerHTopMode" #define CFG_IGNORE_PEER_HT_MODE_MIN ( 0 ) #define CFG_IGNORE_PEER_HT_MODE_MAX ( 1 ) #define CFG_IGNORE_PEER_HT_MODE_DEFAULT ( 0 ) #define CFG_INITIAL_DWELL_TIME_NAME "gInitialDwellTime" #define CFG_INITIAL_DWELL_TIME_DEFAULT (0) #define CFG_INITIAL_DWELL_TIME_MIN (0) #define CFG_INITIAL_DWELL_TIME_MAX (100) #define CFG_INITIAL_SCAN_SKIP_DFS_CH_NAME "gInitialScanSkipDFSCh" #define CFG_INITIAL_SCAN_SKIP_DFS_CH_DEFAULT (1) #define CFG_INITIAL_SCAN_SKIP_DFS_CH_MIN (0) #define CFG_INITIAL_SCAN_SKIP_DFS_CH_MAX (1) #define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_NAME "btcFatalHidnSniffBlkGuidance" #define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_MIN ( 0 ) #define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_MAX ( 2 ) #define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_DEFAULT ( 2 ) #define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_NAME "btcCriticalHidnSniffBlkGuidance" #define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_MIN ( 0 ) #define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_MAX ( 1 ) #define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_DEFAULT ( 1 ) #define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_NAME "btcA2dpTxQueueThold" #define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_MIN ( 0 ) #define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_MAX ( 1 ) #define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_DEFAULT ( 0 ) #define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_NAME "btcOppTxQueueThold" #define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_MIN ( 0 ) #define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_MAX ( 3 ) #define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_DEFAULT ( 1 ) #ifdef WLAN_FEATURE_11W #define CFG_PMF_SA_QUERY_MAX_RETRIES_NAME "pmfSaQueryMaxRetries" #define CFG_PMF_SA_QUERY_MAX_RETRIES_DEFAULT ( 5 ) #define CFG_PMF_SA_QUERY_MAX_RETRIES_MIN ( 0 ) #define CFG_PMF_SA_QUERY_MAX_RETRIES_MAX ( 20 ) #define CFG_PMF_SA_QUERY_RETRY_INTERVAL_NAME "pmfSaQueryRetryInterval" #define CFG_PMF_SA_QUERY_RETRY_INTERVAL_DEFAULT ( 200 ) #define CFG_PMF_SA_QUERY_RETRY_INTERVAL_MIN ( 0 ) #define CFG_PMF_SA_QUERY_RETRY_INTERVAL_MAX ( 2000 ) #endif #define CFG_DEFER_IMPS_FOR_TIME_NAME "gDeferIMPStime" #define CFG_DEFER_IMPS_FOR_TIME_MIN (0) #define CFG_DEFER_IMPS_FOR_TIME_MAX (500) #define CFG_DEFER_IMPS_FOR_TIME_DEFAULT (200) /* If last disconnection was due to HB failure and we reconnect * to same AP next time, send Deauth before starting connection */ #define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION "gSendDeauthBeforeCon" #define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION_MIN (0) #define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION_MAX (1) #define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION_DEFAULT (0) /* gEnableMacAddrSpoof = 0 => disable mac spoofing = 1 => enable mac spoofing in both HOST and FW = 2 => enable mac spoofing in FW and disable mac spoofing in HOST */ #define CFG_ENABLE_MAC_ADDR_SPOOFING "gEnableMacAddrSpoof" #define CFG_ENABLE_MAC_ADDR_SPOOFING_MIN (0) #define CFG_ENABLE_MAC_ADDR_SPOOFING_MAX (2) #define CFG_ENABLE_MAC_ADDR_SPOOFING_DEFAULT (0) /* Disable Mac Spoof for p2p Scan */ #define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING "gDisableP2PMacAddrSpoof" #define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING_MIN (0) #define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING_MAX (1) #define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING_DEFAULT (1) #define CFG_ENABLE_FATAL_EVENT_TRIGGER "gEnableFatalEvent" #define CFG_ENABLE_FATAL_EVENT_TRIGGER_MIN (0) #define CFG_ENABLE_FATAL_EVENT_TRIGGER_MAX (1) #define CFG_ENABLE_FATAL_EVENT_TRIGGER_DEFAULT (1) #define CFG_ENABLE_MGMT_LOGGING "gEnableMgmtLogging" #define CFG_ENABLE_MGMT_LOGGING_MIN (0) #define CFG_ENABLE_MGMT_LOGGING_MAX (1) #define CFG_ENABLE_MGMT_LOGGING_DEFAULT (0) #define CFG_ENABLE_BMUHW_TRACING "gEnableBMUHWtracing" #define CFG_ENABLE_BMUHW_TRACING_MIN (0) #define CFG_ENABLE_BMUHW_TRACING_MAX (1) #define CFG_ENABLE_BMUHW_TRACING_DEFAULT (1) #define CFG_ENABLE_FW_LOGGING "gEnableFWLogging" #define CFG_ENABLE_FW_LOGGING_MIN (0) #define CFG_ENABLE_FW_LOGGING_MAX (1) #define CFG_ENABLE_FW_LOGGING_DEFAULT (1) // firmware will wakeup the host to send logs always #define CFG_ENABLE_FW_CONTINIOUS_LOGGING "gEnableContFWLogging" #define CFG_ENABLE_FW_CONTINIOUS_LOGGING_MIN (0) #define CFG_ENABLE_FW_CONTINIOUS_LOGGING_MAX (1) #define CFG_ENABLE_FW_CONTINIOUS_LOGGING_DEFAULT (0) /* when firmware log reaches this threshold and * if host is awake it will push the logs. */ #define CFG_MIN_LOGGING_BUFFER_SIZE "gMinLoggingBufferSize" #define CFG_MIN_LOGGING_BUFFER_SIZE_MIN (0) #define CFG_MIN_LOGGING_BUFFER_SIZE_MAX (6) #define CFG_MIN_LOGGING_BUFFER_SIZE_DEFAULT (1) // Max ring size in firmware to log msgs when host is suspended state #define CFG_MAX_LOGGING_BUFFER_SIZE "gMaxLoggingBufferSize" #define CFG_MAX_LOGGING_BUFFER_SIZE_MIN (0) #define CFG_MAX_LOGGING_BUFFER_SIZE_MAX (6) #define CFG_MAX_LOGGING_BUFFER_SIZE_DEFAULT (6) #define CFG_ENABLE_CH_AVOID "gEnableChannelAvoidance" #define CFG_ENABLE_CH_AVOID_MIN ( 0 ) #define CFG_ENABLE_CH_AVOID_MAX ( 1 ) #define CFG_ENABLE_CH_AVOID_DEFAULT ( 1 ) #define CFG_MAX_CONCURRENT_CONNECTIONS_NAME "gMaxConcurrentActiveSessions" #define CFG_MAX_CONCURRENT_CONNECTIONS_DEFAULT ( 2 ) #define CFG_MAX_CONCURRENT_CONNECTIONS_MIN ( 1 ) #define CFG_MAX_CONCURRENT_CONNECTIONS_MAX ( 4 ) #ifdef WLAN_FEATURE_AP_HT40_24G #define CFG_ENABLE_HT_2040_COEX "gApHT4024G" #define CFG_ENABLE_HT_2040_COEX_MIN ( 0 ) #define CFG_ENABLE_HT_2040_COEX_MAX ( 1 ) #define CFG_ENABLE_HT_2040_COEX_DEFAULT ( 0 ) #endif //Enable Dynamic WMM PS support #define CFG_ENABLE_DYNAMIC_WMMPS_NAME "gEnableDynamicWMMPS" #define CFG_ENABLE_DYNAMIC_WMM_PS_MIN (0) #define CFG_ENABLE_DYNAMIC_WMM_PS_MAX (1) #define CFG_ENABLE_DYNAMIC_WMM_PS_DEFAULT (1) /* * If the number of consecutive SPs for which the firmware has sent * trigger frame (because more data bit was set to 1 at end of SP) * when dynamic WMM PS support is enabled exceeds this value then * firmware will come out of power save mode */ #define CFG_MAX_UAPSD_CONSEC_SP_NAME "gMaxUapsdConsecSP" #define CFG_MAX_UAPSD_CONSEC_SP_DEFAULT ( 10 ) #define CFG_MAX_UAPSD_CONSEC_SP_MIN ( 0 ) #define CFG_MAX_UAPSD_CONSEC_SP_MAX ( 500 ) /* * If the number of frames received in the "gUapsdConsecRxCntMeasWindow" * exceeds this value then firmware will come out of power save mode. * Comes into effect only when dynamic WMM PS is enabled. */ #define CFG_MAX_UAPSD_CONSEC_RX_CNT_NAME "gMaxUapsdConsecRxCnt" #define CFG_MAX_UAPSD_CONSEC_RX_CNT_DEFAULT ( 50 ) #define CFG_MAX_UAPSD_CONSEC_RX_CNT_MIN ( 0 ) #define CFG_MAX_UAPSD_CONSEC_RX_CNT_MAX ( 5000 ) /* * If the number of frames transmitted in the "gUapsdConsecTxCntMeasWindow" * exceeds this value then firmware will come out of power save mode. * Comes into effect only when dynamic WMM PS is enabled. */ #define CFG_MAX_UAPSD_CONSEC_TX_CNT_NAME "gMaxUapsdConsecTxCnt" #define CFG_MAX_UAPSD_CONSEC_TX_CNT_DEFAULT ( 50 ) #define CFG_MAX_UAPSD_CONSEC_TX_CNT_MIN ( 0 ) #define CFG_MAX_UAPSD_CONSEC_TX_CNT_MAX ( 5000 ) // Read the description in "gMaxUapsdConsecRxCnt", the interval is in msec #define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_NAME "gUapsdConsecRxCntMeasWindow" #define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_DEFAULT ( 500 ) #define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_MIN ( 50 ) #define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_MAX ( 50000 ) // Read the description in "gMaxUapsdConsecTxCnt", the interval is in msec #define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_NAME "gUapsdConsecTxCntMeasWindow" #define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_DEFAULT ( 500 ) #define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_MIN ( 50 ) #define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_MAX ( 50000 ) /* * number of PS poll frames that can be sent by the firmware to retrieve * Data before the firmware comes out of power save mode for an AC * which is neither Delivery or Trigger enabled when dynamic WMM PS * is configured. * Comes into effect only when dynamic WMM PS is enabled. */ #define CFG_UAPSD_PSPOLL_NAME "gMaxPsPollInWmmUapsdMode" #define CFG_UAPSD_PSPOLL_MIN (0) #define CFG_UAPSD_PSPOLL_MAX (255) #define CFG_UAPSD_PSPOLL_DEFAULT (0) /* * If the number of itervals for which the firmware detects no activity * on the WMM PS enabled ACs exceeds this value then the firmware will * go to power save mode. The length of the interval is dynamically * calculated by the firmware depending on the configured service * intervals. * Comes into effect only when dynamic WMM PS is enabled. */ #define CFG_MAX_UAPSD_INACT_INTVL_NAME "gMaxUapsdInactivityIntervals" #define CFG_MAX_UAPSD_INACT_INTVL_MIN (1) #define CFG_MAX_UAPSD_INACT_INTVL_MAX (255) #define CFG_MAX_UAPSD_INACT_INTVL_DEFAULT (10) #define CFG_BURST_MODE_BE_TXOP_VALUE "gBurstModeTXOPValue" #define CFG_BURST_MODE_BE_TXOP_VALUE_MIN ( 0 ) #define CFG_BURST_MODE_BE_TXOP_VALUE_MAX ( 12288 ) #define CFG_BURST_MODE_BE_TXOP_VALUE_DEFAULT ( 0 ) #define CFG_P2P_LISTEN_DEFER_INTERVAL_NAME "gP2PListenDeferInterval" #define CFG_P2P_LISTEN_DEFER_INTERVAL_MIN ( 100 ) #define CFG_P2P_LISTEN_DEFER_INTERVAL_MAX ( 200 ) #define CFG_P2P_LISTEN_DEFER_INTERVAL_DEFAULT ( 100 ) #define CFG_BTC_ENABLE_IND_TIMER_VALUE "gBtcEnableIndTimerVal" #define CFG_BTC_ENABLE_IND_TIMER_VALUE_MIN ( 5 ) #define CFG_BTC_ENABLE_IND_TIMER_VALUE_MAX ( 60 ) #define CFG_BTC_ENABLE_IND_TIMER_VALUE_DEFAULT ( 60 ) #define CFG_DXE_REPLENISH_RX_TIMER_VALUE "gDXEReplenishRXTimerVal" #define CFG_DXE_REPLENISH_RX_TIMER_VALUE_MIN ( 0 ) #define CFG_DXE_REPLENISH_RX_TIMER_VALUE_MAX ( 20000 ) #define CFG_DXE_REPLENISH_RX_TIMER_VALUE_DEFAULT ( 6000 ) #define CFG_DXE_SSR_ENABLE "gDxeSSREnable" #define CFG_DXE_SSR_ENABLE_DEFAULT ( 1 ) #define CFG_DXE_SSR_ENABLE_MIN ( 0 ) #define CFG_DXE_SSR_ENABLE_MAX ( 1 ) #define CFG_TOGGLE_ARP_BDRATES_NAME "gToggleArpBDRates" #define CFG_TOGGLE_ARP_BDRATES_MIN 0 #define CFG_TOGGLE_ARP_BDRATES_MAX 2 #define CFG_TOGGLE_ARP_BDRATES_DEFAULT 0 #define CFG_DISABLE_BAR_WAKEUP_HOST_NAME "gDisableBarWakeUp" #define CFG_DISABLE_BAR_WAKEUP_HOST_MIN 0 #define CFG_DISABLE_BAR_WAKEUP_HOST_MAX 1 #define CFG_DISABLE_BAR_WAKEUP_HOST_DEFAULT 0 #ifdef DHCP_SERVER_OFFLOAD /* * Enable/Disable DHCP Server Offload * Default: Disable */ #define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_NAME "gDHCPServerOffloadEnable" #define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_MIN ( 0 ) #define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_MAX ( 1 ) #define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_DEFAULT ( 1 ) /* Max number of DHCP clients to be supported */ #define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_NAME "gDHCPMaxNumClients" #define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_MIN ( 1 ) #define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_MAX ( 4 ) #define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_DEFAULT ( 4 ) /* Start address of the pool */ #define CFG_DHCP_SERVER_OFFLOAD_START_LSB_NAME "gDHCPStartLsb" #define CFG_DHCP_SERVER_OFFLOAD_START_LSB_MIN ( 100 ) #define CFG_DHCP_SERVER_OFFLOAD_START_LSB_MAX ( 255 ) #define CFG_DHCP_SERVER_OFFLOAD_START_LSB_DEFAULT ( 100 ) /* DHCP Server IP*/ #define CFG_DHCP_SERVER_IP_NAME "gDHCPServerIP" #define CFG_DHCP_SERVER_IP_DEFAULT "192.168.43.1" #endif /* DHCP_SERVER_OFFLOAD */ #ifdef MDNS_OFFLOAD /* * Enable/Disable multicast DNS Offload * 0x0 - Disable mDNS (Default) * 0x1 - Enable mDNS */ #define CFG_MDNS_OFFLOAD_SUPPORT_NAME "gMDNSOffloadEnable" #define CFG_MDNS_OFFLOAD_SUPPORT_MIN ( 0 ) #define CFG_MDNS_OFFLOAD_SUPPORT_MAX ( 1 ) #define CFG_MDNS_OFFLOAD_SUPPORT_ENABLE ( 1 ) #define CFG_MDNS_OFFLOAD_SUPPORT_DEFAULT ( 1 ) /* Set FQDN string for mDNS */ #define CFG_MDNS_FQDN_NAME "gMDNSFqdn" #define CFG_MDNS_FQDN_DEFAULT "_GoProRemote._tcp.local" /* Set UFQDN string for mDNS */ #define CFG_MDNS_UNIQUE_FQDN_NAME "gMDNSUniqueFqdn" #define CFG_MDNS_UNIQUE_FQDN_DEFAULT "service._GoProRemote._tcp.local" /* Set the response Type A to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_A_NAME "gMDNSResponseTypeA" #define CFG_MDNS_RESPONSE_TYPE_A_DEFAULT "goprobp-D89685121212.local" #define CFG_MDNS_RESPONSE_TYPE_A_IPV4_NAME "gMDNSResponseTypeAIpv4Addr" #define CFG_MDNS_RESPONSE_TYPE_A_IPV4_MIN ( 1 ) #define CFG_MDNS_RESPONSE_TYPE_A_IPV4_MAX ( 0xffffffff ) #define CFG_MDNS_RESPONSE_TYPE_A_IPV4_DEFAULT ( 0xc0a80102 ) /* Set the response Type TXT to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_TXT_NAME "gMDNSResponseTypeTXT" #define CFG_MDNS_RESPONSE_TYPE_TXT_DEFAULT "GoProBP-D89685121212._GoProRemote._tcp.local" #define CFG_MDNS_RESPONSE_TYPE_TXT_CNT_NAME "gMDNSResponseTypeTXTContent" #define CFG_MDNS_RESPONSE_TYPE_TXT_CNT_DEFAULT "Device=HERO 3+-BAWA Model=BAWA Version=HD3.11.02.00 Wifi Version=4.0.36.0 Protocol Version=2" /* Set the response Type PTR to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_PTR_NAME "gMDNSResponseTypePTR" #define CFG_MDNS_RESPONSE_TYPE_PTR_DEFAULT "_GoProRemote._tcp.local" #define CFG_MDNS_RESPONSE_TYPE_PTR_DN_NAME "gMDNSResponseTypePTRDomainName" #define CFG_MDNS_RESPONSE_TYPE_PTR_DN_DEFAULT "GoProBP-D89685121212._GoProRemote._tcp.local" /* Set the response Type SRV to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_SRV_NAME "gMDNSResponseTypeSRV" #define CFG_MDNS_RESPONSE_TYPE_SRV_DEFAULT "GoProBP-D89685121212._GoProRemote._tcp.local" /* Set the response Type SRV Priority to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_NAME "gMDNSResponseTypeSRVPriority" #define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_MIN ( 0 ) #define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_MAX ( 65535 ) #define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_DEFAULT ( 0 ) /* Set the response Type SRV Weight to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_NAME "gMDNSResponseTypeSRVWeight" #define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_MIN ( 0 ) #define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_MAX ( 65525 ) #define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_DEFAULT ( 0 ) /* Set the response Type SRV Port to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_NAME "gMDNSResponseTypeSRVPort" #define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_MIN ( 0 ) #define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_MAX ( 65525 ) #define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_DEFAULT ( 80 ) /* Set the response Type SRV Target to mDNS queries */ #define CFG_MDNS_RESPONSE_TYPE_SRV_TGT_NAME "gMDNSResponseTypeSRVTarget" #define CFG_MDNS_RESPONSE_TYPE_SRV_TGT_DEFAULT "goprobp-D89685121212.local" #endif /* MDNS_OFFLOAD */ /* * gExtScanConcMode is used to manage EXT Scan during concurrency * This can be useful during WFD session. To avoid glitches during WFD * either ext scan has to be disabled or use split scan * 0: Disable EXT Scan * 1: Use Split scan * 2: Enable EXT Scan */ #define CFG_EXT_SCAN_CONC_MODE "gExtScanConcMode" #define CFG_EXT_SCAN_CONC_MODE_MIN (0) #define CFG_EXT_SCAN_CONC_MODE_MAX (2) #define CFG_EXT_SCAN_CONC_MODE_DEFAULT (0) /* * If within gLinkFailTimeout period(values is mentioned in msec) if FW * doesn't receive acks for gLinkFailTxCnt number of packets, then link will * be disconnected. */ #define CFG_LINK_FAIL_TIMEOUT_NAME "gLinkFailTimeout" #define CFG_LINK_FAIL_TIMEOUT_MIN ( 1000 ) #define CFG_LINK_FAIL_TIMEOUT_MAX ( 60000 ) #define CFG_LINK_FAIL_TIMEOUT_DEF ( 6000 ) #define CFG_LINK_FAIL_TX_CNT_NAME "gLinkFailTxCnt" #define CFG_LINK_FAIL_TX_CNT_MIN ( 50 ) #define CFG_LINK_FAIL_TX_CNT_MAX ( 1000 ) #define CFG_LINK_FAIL_TX_CNT_DEF ( 200 ) #define CFG_OPTIMIZE_CA_EVENT_NAME "gOptimizeCAevent" #define CFG_OPTIMIZE_CA_EVENT_DISABLE ( 0 ) #define CFG_OPTIMIZE_CA_EVENT_ENABLE ( 1 ) #define CFG_OPTIMIZE_CA_EVENT_DEFAULT ( 0 ) #define CFG_ACTIVE_PASSIVE_CHAN_CONV_NAME "gActivePassiveChCon" #define CFG_ACTIVE_PASSIVE_CHAN_CONV_MIN (0) #define CFG_ACTIVE_PASSIVE_CHAN_CONV_MAX (1) #define CFG_ACTIVE_PASSIVE_CHAN_CONV_DEF (1) #define CFG_WIFI_CONFIG_ENABLE "gEnableWifiConfig" #define CFG_WIFI_CONFIG_MIN (0) #define CFG_WIFI_CONFIG_MAX (1) #define CFG_WIFI_CONFIG_DEFAULT (1) #define CFG_MAXCHAN_FOR_CHANTIME_CORR_NAME "gMaxChannelForMoreDwellTime" #define CFG_MAXCHAN_FOR_CHANTIME_CORR_MIN (0) #define CFG_MAXCHAN_FOR_CHANTIME_CORR_MAX (35) #define CFG_MAXCHAN_FOR_CHANTIME_CORR_DEFAULT (10) /* * BOffsetCorrectionEnable : This ini will control enabling/disabling * of rate dependent power offsets in firmware */ #define CFG_SAR_BOFFSET_SET_CORRECTION_NAME "gBOffsetCorrectionEnable" #define CFG_SAR_BOFFSET_SET_CORRECTION_MIN (0) #define CFG_SAR_BOFFSET_SET_CORRECTION_MAX (1) #define CFG_SAR_BOFFSET_SET_CORRECTION_DEFAULT (0) /* * If gEnableEdcaParams is set to 1, params gEdcaVoCwmin, * gEdcaViCwmin, gEdcaBkCwmin, gEdcaBeCwmin, gEdcaVoCwmax, * gEdcaViCwmax, gEdcaBkCwmax, gEdcaBeCwmax, gEdcaVoAifs, * gEdcaViAifs, gEdcaBkAifs and gEdcaBeAifs values are used * to overwrite the values received from AP */ #define CFG_ENABLE_EDCA_INI_NAME "gEnableEdcaParams" #define CFG_ENABLE_EDCA_INI_MIN (0) #define CFG_ENABLE_EDCA_INI_MAX (1) #define CFG_ENABLE_EDCA_INI_DEFAULT (0) /* Cwmin value for EDCA_AC_VO. CWVomin = 2^gEdcaVoCwmin -1 */ #define CFG_EDCA_VO_CWMIN_VALUE_NAME "gEdcaVoCwmin" #define CFG_EDCA_VO_CWMIN_VALUE_MIN (0x0) #define CFG_EDCA_VO_CWMIN_VALUE_MAX (15) #define CFG_EDCA_VO_CWMIN_VALUE_DEFAULT (2) /* Cwmin value for EDCA_AC_VI. CWVimin = 2^gEdcaViCwmin -1 */ #define CFG_EDCA_VI_CWMIN_VALUE_NAME "gEdcaViCwmin" #define CFG_EDCA_VI_CWMIN_VALUE_MIN (0x0) #define CFG_EDCA_VI_CWMIN_VALUE_MAX (15) #define CFG_EDCA_VI_CWMIN_VALUE_DEFAULT (3) /* Cwmin value for EDCA_AC_BK. CWBkmin = 2^gEdcaBkCwmin -1 */ #define CFG_EDCA_BK_CWMIN_VALUE_NAME "gEdcaBkCwmin" #define CFG_EDCA_BK_CWMIN_VALUE_MIN (0x0) #define CFG_EDCA_BK_CWMIN_VALUE_MAX (15) #define CFG_EDCA_BK_CWMIN_VALUE_DEFAULT (4) /* Cwmin value for EDCA_AC_BE. CWBemin = 2^gEdcaBeCwmin -1 */ #define CFG_EDCA_BE_CWMIN_VALUE_NAME "gEdcaBeCwmin" #define CFG_EDCA_BE_CWMIN_VALUE_MIN (0x0) #define CFG_EDCA_BE_CWMIN_VALUE_MAX (15) #define CFG_EDCA_BE_CWMIN_VALUE_DEFAULT (4) /* Cwmax value for EDCA_AC_VO. CWVomax = 2^gEdcaVoCwmax -1 */ #define CFG_EDCA_VO_CWMAX_VALUE_NAME "gEdcaVoCwmax" #define CFG_EDCA_VO_CWMAX_VALUE_MIN (0) #define CFG_EDCA_VO_CWMAX_VALUE_MAX (15) #define CFG_EDCA_VO_CWMAX_VALUE_DEFAULT (3) /* Cwmax value for EDCA_AC_VI. CWVimax = 2^gEdcaViCwmax -1 */ #define CFG_EDCA_VI_CWMAX_VALUE_NAME "gEdcaViCwmax" #define CFG_EDCA_VI_CWMAX_VALUE_MIN (0) #define CFG_EDCA_VI_CWMAX_VALUE_MAX (15) #define CFG_EDCA_VI_CWMAX_VALUE_DEFAULT (4) /* Cwmax value for EDCA_AC_BK. CWBkmax = 2^gEdcaBkCwmax -1 */ #define CFG_EDCA_BK_CWMAX_VALUE_NAME "gEdcaBkCwmax" #define CFG_EDCA_BK_CWMAX_VALUE_MIN (0) #define CFG_EDCA_BK_CWMAX_VALUE_MAX (15) #define CFG_EDCA_BK_CWMAX_VALUE_DEFAULT (10) /* Cwmax value for EDCA_AC_BE. CWBemax = 2^gEdcaBeCwmax -1 */ #define CFG_EDCA_BE_CWMAX_VALUE_NAME "gEdcaBeCwmax" #define CFG_EDCA_BE_CWMAX_VALUE_MIN (0) #define CFG_EDCA_BE_CWMAX_VALUE_MAX (15) #define CFG_EDCA_BE_CWMAX_VALUE_DEFAULT (10) /* Aifs value for EDCA_AC_VO.*/ #define CFG_EDCA_VO_AIFS_VALUE_NAME "gEdcaVoAifs" #define CFG_EDCA_VO_AIFS_VALUE_MIN (0) #define CFG_EDCA_VO_AIFS_VALUE_MAX (15) #define CFG_EDCA_VO_AIFS_VALUE_DEFAULT (2) /* Aifs value for EDCA_AC_VI.*/ #define CFG_EDCA_VI_AIFS_VALUE_NAME "gEdcaViAifs" #define CFG_EDCA_VI_AIFS_VALUE_MIN (0) #define CFG_EDCA_VI_AIFS_VALUE_MAX (15) #define CFG_EDCA_VI_AIFS_VALUE_DEFAULT (2) /* Aifs value for EDCA_AC_BK.*/ #define CFG_EDCA_BK_AIFS_VALUE_NAME "gEdcaBkAifs" #define CFG_EDCA_BK_AIFS_VALUE_MIN (0) #define CFG_EDCA_BK_AIFS_VALUE_MAX (15) #define CFG_EDCA_BK_AIFS_VALUE_DEFAULT (7) /* Aifs value for EDCA_AC_BE.*/ #define CFG_EDCA_BE_AIFS_VALUE_NAME "gEdcaBeAifs" #define CFG_EDCA_BE_AIFS_VALUE_MIN (0) #define CFG_EDCA_BE_AIFS_VALUE_MAX (15) #define CFG_EDCA_BE_AIFS_VALUE_DEFAULT (3) /* If gSendMgmtPktViaWQ5 is enabled, mgmt packet will go via WQ5 */ #define CFG_SEND_MGMT_PKT_VIA_WQ5_NAME "gSendMgmtPktViaWQ5" #define CFG_SEND_MGMT_PKT_VIA_WQ5_MIN ( 0 ) #define CFG_SEND_MGMT_PKT_VIA_WQ5_MAX ( 1) #define CFG_SEND_MGMT_PKT_VIA_WQ5_DEF ( 0 ) /* * gSapProbeRespOffload: when set in sap, offloads the * probe response transmission to firmware */ #define CFG_SAP_PROBE_RESP_OFFLOAD_NAME "gSapProbeRespOffload" #define CFG_SAP_PROBE_RESP_OFFLOAD_MIN (0) #define CFG_SAP_PROBE_RESP_OFFLOAD_MAX (1) #define CFG_SAP_PROBE_RESP_OFFLOAD_DEFAULT (1) /* * gDisableScanDuringSco is used to disable/enable scan during SCO call * This can be useful to avoid glitches because of EXIT_IMPS invoked by scan * when SCO call in progress * 0: Enable scan * 1: Disable scan */ #define CFG_DISABLE_SCAN_DURING_SCO "gDisableScanDuringSco" #define CFG_DISABLE_SCAN_DURING_SCO_MIN (0) #define CFG_DISABLE_SCAN_DURING_SCO_MAX (1) #define CFG_DISABLE_SCAN_DURING_SCO_DEFAULT (0) #define CFG_SAP_INTERNAL_RESTART_NAME "gEnableSapInternalRestart" #define CFG_SAP_INTERNAL_RESTART_MIN (0) #define CFG_SAP_INTERNAL_RESTART_MAX (1) #define CFG_SAP_INTERNAL_RESTART_DEFAULT (1) /* * maximum interval (in seconds) for a * single scan plan supported by the device. */ #define CFG_MAX_SCHED_SCAN_PLAN_INT_NAME "g_max_sched_scan_plan_int" #define CFG_MAX_SCHED_SCAN_PLAN_INT_MIN (1) #define CFG_MAX_SCHED_SCAN_PLAN_INT_MAX (7200) #define CFG_MAX_SCHED_SCAN_PLAN_INT_DEFAULT (3600) /* * maximum number of iterations for a single * scan plan supported by the device. */ #define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_NAME "g_max_sched_scan_plan_itrns" #define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_MIN (1) #define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_MAX (100) #define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_DEFAULT (10) /* * gEnableLFRMBB is used to disable/enable LFR Make before Break * 1: Enable LFR Make before Break * 0: Disable LFR Make before Break */ #define CFG_ENABLE_LFR_MBB "gEnableLFRMBB" #define CFG_ENABLE_LFR_MBB_MIN (0) #define CFG_ENABLE_LFR_MBB_MAX (1) #define CFG_ENABLE_LFR_MBB_DEFAULT (0) /* Value for TRIGGER_NULLFRAME_BEFORE_HB.*/ #define CFG_TRIGGER_NULLFRAME_BEFORE_HB_NAME "gTriggerNullframeBeforeHb" #define CFG_TRIGGER_NULLFRAME_BEFORE_HB_MIN (0) #define CFG_TRIGGER_NULLFRAME_BEFORE_HB_MAX (1) #define CFG_TRIGGER_NULLFRAME_BEFORE_HB_DEFAULT (0) /* * If enabled ecsa will be used to switch channel to force scc else SAP * will be restarted. */ #define CFG_FORCE_SCC_WITH_ECSA_NAME "force_scc_with_ecsa" #define CFG_FORCE_SCC_WITH_ECSA_MIN (0) #define CFG_FORCE_SCC_WITH_ECSA_MAX (1) #define CFG_FORCE_SCC_WITH_ECSA_DEFAULT (1) #define CFG_STA_SAP_SCC_ON_DFS_CHAN "sta_sap_scc_on_dfs_chan" #define CFG_STA_SAP_SCC_ON_DFS_CHAN_MIN (0) #define CFG_STA_SAP_SCC_ON_DFS_CHAN_MAX (1) #define CFG_STA_SAP_SCC_ON_DFS_CHAN_DEFAULT (0) /* * gEnableAggBTCScoOUI is used to enable aggregation during SCO * with specific AP based on OUI. If set to nothing, feature is * enabled for all APs. Ini supports only single OUI. * ex: gEnableAggBTCScoOUI=74-EA-CB - enable with specific AP */ #define CFG_ENABLE_AGG_BTC_SCO_OUI_NAME "gEnableAggBTCScoOUI" #define CFG_ENABLE_AGG_BTC_SCO_OUI_DEFAULT "" /* * gNumBuffBTCSco is used to set block ack buffer size for * aggregation during SCO. If this is set to 0 or 1, aggregation * during SCO feature is disabled. To enable aggregation * during SCO, gNumBuffBTCSco should be set to be greater than 1. */ #define CFG_NUM_BUFF_BTC_SCO_INVALID 1 #define CFG_NUM_BUFF_BTC_SCO_NAME "gNumBuffBTCSco" #define CFG_NUM_BUFF_BTC_SCO_MIN (0) #define CFG_NUM_BUFF_BTC_SCO_MAX (10) #define CFG_NUM_BUFF_BTC_SCO_DEFAULT (0) /* Value for ENABLE_POWERSAVE_OFFLOAD*/ #define CFG_ENABLE_POWERSAVE_OFFLOAD_NAME "gEnablePowerSaveOffload" #define CFG_ENABLE_POWERSAVE_OFFLOAD_MIN (1) #define CFG_ENABLE_POWERSAVE_OFFLOAD_MAX (2) #define CFG_ENABLE_POWERSAVE_OFFLOAD_DEFAULT (1) /* * * force_rsne_override - force rsnie override from user * @Min: 0 * @Max: 1 * @Default: 0 * * This ini is used to enable/disable test mode to force rsne override used in * security enhancement test cases to pass the RSNIE sent by user in * assoc request. * * Related: None * * Supported Feature: STA * * Usage: internal * * */ #define CFG_FORCE_RSNE_OVERRIDE_NAME "force_rsne_override" #define CFG_FORCE_RSNE_OVERRIDE_MIN (0) #define CFG_FORCE_RSNE_OVERRIDE_MAX (1) #define CFG_FORCE_RSNE_OVERRIDE_DEFAULT (0) /* * * gEnabledefaultSAP - This will control the creation of default SAP * interface * @Default: NULL * * This ini is used for providing control to create a default SAP session * along with the creation of wlan0 and p2p0. The name of the interface is * specified as the parameter * * Usage: External * * */ #define CFG_ENABLE_DEFAULT_SAP "gEnabledefaultSAP" #define CFG_ENABLE_DEFAULT_SAP_DEFAULT "" /* * * sae_enabled - Enable/Disable SAE support in driver * @Min: 0 * @Max: 1 * @Default: 1 * * This ini is used to enable/disable SAE support in driver * Driver will update config to supplicant based on this config. * * Related: None * * Supported Feature: SAE * Usage: External * * */ #define CFG_IS_SAE_ENABLED_NAME "sae_enabled" #define CFG_IS_SAE_ENABLED_DEFAULT (1) #define CFG_IS_SAE_ENABLED_MIN (0) #define CFG_IS_SAE_ENABLED_MAX (1) /* * * enable_sae_for_sap - Enable/Disable SAE support in driver for SAP * @Min: 0 * @Max: 1 * @Default: 1 * * This ini is used to enable/disable SAE support in driver for SAP mode * Driver will process/drop the SAE authentication frames based on this config. * * Related: None * * Supported Feature: SAE * Usage: External * * */ #define CFG_ENABLE_SAE_FOR_SAP_NAME "enable_sae_for_sap" #define CFG_ENABLE_SAE_FOR_SAP_DEFAULT (1) #define CFG_ENABLE_SAE_FOR_SAP_MIN (0) #define CFG_ENABLE_SAE_FOR_SAP_MAX (1) #define CFG_SW_PTA_ENABLE_NAME "sw_pta_enable" #define CFG_SW_PTA_ENABLE_DEFAULT (0) #define CFG_SW_PTA_ENABLE_MIN (0) #define CFG_SW_PTA_ENABLE_MAX (1) /* Enable/disable periodic scan no candidate found */ #define CFG_PERIODIC_ROAM_SCAN_ENABLED "gPeriodicRoamScanEnabled" #define CFG_PERIODIC_ROAM_SCAN_ENABLED_MIN (0) #define CFG_PERIODIC_ROAM_SCAN_ENABLED_MAX (1) #define CFG_PERIODIC_ROAM_SCAN_ENABLED_DEFAULT (0) /*--------------------------------------------------------------------------- Type declarations -------------------------------------------------------------------------*/ typedef struct { //Bitmap to track what is explicitly configured DECLARE_BITMAP(bExplicitCfg, MAX_CFG_INI_ITEMS); //Config parameters v_U32_t RTSThreshold; v_U32_t FragmentationThreshold; v_U32_t nCheckForHangTime; v_U32_t Calibration; v_U32_t CalibrationPeriod; v_U8_t OperatingChannel; v_BOOL_t ShortSlotTimeEnabled; v_BOOL_t Is11dSupportEnabled; v_BOOL_t Is11hSupportEnabled; v_U32_t nDeferScanTimeInterval; v_BOOL_t fEnforce11dChannels; v_BOOL_t fSupplicantCountryCodeHasPriority; v_BOOL_t fEnforceCountryCodeMatch; v_BOOL_t fEnforceDefaultDomain; v_U32_t Cfg1Id; v_U32_t Cfg2Id; v_U32_t Cfg3Id; v_U32_t Cfg4Id; v_U32_t Cfg5Id; v_U32_t Cfg1Value; v_U32_t Cfg2Value; v_U32_t Cfg3Value; v_U32_t Cfg4Value; v_U32_t Cfg5Value; v_U32_t HeartbeatThresh24; char PowerUsageControl[4]; v_U8_t nEnableSuspend; v_U8_t nEnableDriverStop; v_BOOL_t fIsImpsEnabled; v_BOOL_t fIsSsrPanicOnFailure; v_BOOL_t fIsLogpEnabled; v_U8_t btcExecutionMode; v_U8_t btcConsBtSlotsToBlockDuringDhcp; v_U8_t btcA2DPBtSubIntervalsDuringDhcp; v_U32_t btcStaticLenInqBt; v_U32_t btcStaticLenPageBt; v_U32_t btcStaticLenConnBt; v_U32_t btcStaticLenLeBt; v_U32_t btcStaticLenInqWlan; v_U32_t btcStaticLenPageWlan; v_U32_t btcStaticLenConnWlan; v_U32_t btcStaticLenLeWlan; v_U32_t btcDynMaxLenBt; v_U32_t btcDynMaxLenWlan; v_U32_t btcMaxScoBlockPerc; v_U32_t btcDhcpProtOnA2dp; v_U32_t btcDhcpProtOnSco; v_U32_t mwsCoexVictimWANFreq[10]; v_U32_t mwsCoexVictimWLANFreq[10]; v_U32_t mwsCoexVictimConfig[10]; v_U32_t mwsCoexVictimConfig2[10]; v_U32_t mwsCoexModemBackoff; v_U32_t mwsCoexConfig[6]; v_U32_t SARPowerBackoff; v_U32_t nImpsModSleepTime; v_U32_t nImpsMaxSleepTime; v_U32_t nImpsMinSleepTime; v_BOOL_t fIsBmpsEnabled; v_U32_t nBmpsModListenInterval; v_U32_t nBmpsMaxListenInterval; v_U32_t nBmpsMinListenInterval; v_BOOL_t fIsAutoBmpsTimerEnabled; v_U32_t nAutoBmpsTimerValue; eHddDot11Mode dot11Mode; v_U32_t nChannelBondingMode24GHz; bool override_ht20_40_24g; v_U32_t nChannelBondingMode5GHz; v_U32_t MaxRxAmpduFactor; v_U32_t nBAAgingTimerInterval; v_U16_t TxRate; v_U32_t AdaptiveThresholdAlgo; v_U32_t ShortGI20MhzEnable; v_U32_t BlockAckAutoSetup; v_U32_t ScanResultAgeCount; v_U32_t nScanAgeTimeNCNPS; v_U32_t nScanAgeTimeNCPS; v_U32_t nScanAgeTimeCNPS; v_U32_t nScanAgeTimeCPS; v_U8_t nRssiCatGap; v_BOOL_t fIsShortPreamble; v_BOOL_t fIsAutoIbssBssid; v_MACADDR_t IbssBssid; v_U32_t AdHocChannel5G; v_U32_t AdHocChannel24G; v_U8_t intfAddrMask; v_MACADDR_t intfMacAddr[VOS_MAX_CONCURRENCY_PERSONA]; v_BOOL_t apUapsdEnabled; v_BOOL_t apRandomBssidEnabled; v_BOOL_t apProtEnabled; v_U16_t apProtection; v_BOOL_t apOBSSProtEnabled; v_U8_t MinFramesProcThres; v_U8_t apCntryCode[4]; v_BOOL_t apDisableIntraBssFwd; v_U8_t nEnableListenMode; v_U32_t nAPAutoShutOff; v_U8_t apStartChannelNum; v_U8_t apEndChannelNum; v_U8_t apOperatingBand; v_BOOL_t apAutoChannelSelection; v_U8_t enableLTECoex; v_U32_t apKeepAlivePeriod; v_U32_t goKeepAlivePeriod; v_U32_t apLinkMonitorPeriod; v_U32_t goLinkMonitorPeriod; v_U32_t nBeaconInterval; v_U8_t nTxPowerCap; //In dBm v_BOOL_t fIsLowGainOverride; v_U8_t disablePacketFilter; #if defined WLAN_FEATURE_VOWIFI v_BOOL_t fRrmEnable; v_U8_t nInChanMeasMaxDuration; v_U8_t nOutChanMeasMaxDuration; v_U16_t nRrmRandnIntvl; #endif #ifdef WLAN_FEATURE_VOWIFI_11R //Vowifi 11r params v_BOOL_t fFTResourceReqSupported; #endif v_BOOL_t gEnableRoamDelayStats; #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING v_U16_t nNeighborScanPeriod; v_U8_t nNeighborReassocRssiThreshold; v_U8_t nNeighborLookupRssiThreshold; v_U8_t neighborScanChanList[WNI_CFG_VALID_CHANNEL_LIST_LEN]; v_U16_t nNeighborScanMinChanTime; v_U16_t nNeighborScanMaxChanTime; v_U16_t nMaxNeighborReqTries; v_U16_t nNeighborResultsRefreshPeriod; v_U16_t nEmptyScanRefreshPeriod; v_U8_t nNeighborInitialForcedRoamTo5GhEnable; v_U8_t nWeakZoneRssiThresholdForRoam; #endif //Additional Handoff params v_BOOL_t nEnableIdleScan; v_U32_t nRoamingTime; v_U16_t nVccRssiTrigger; v_U32_t nVccUlMacLossThreshold; v_U32_t nPassiveMinChnTime; //in units of milliseconds v_U32_t nPassiveMaxChnTime; //in units of milliseconds v_U32_t nActiveMinChnTime; //in units of milliseconds v_U32_t nActiveMaxChnTime; //in units of milliseconds v_U32_t nInitialDwellTime; //in units of milliseconds uint32_t min_chntime_btc_esco; //in units of milliseconds uint32_t max_chntime_btc_esco; //in units of milliseconds uint32_t min_chntime_btc_sco; uint32_t max_chntime_btc_sco; #ifdef WLAN_AP_STA_CONCURRENCY v_U32_t nPassiveMinChnTimeConc; //in units of milliseconds v_U32_t nPassiveMaxChnTimeConc; //in units of milliseconds v_U32_t nActiveMinChnTimeConc; //in units of milliseconds v_U32_t nActiveMaxChnTimeConc; //in units of milliseconds v_U32_t nRestTimeConc; //in units of milliseconds v_U8_t nNumStaChanCombinedConc; //number of channels combined for //STA in each split scan operation v_U8_t nNumP2PChanCombinedConc; //number of channels combined for //P2P in each split scan operation #endif v_U8_t nMaxPsPoll; v_U8_t nRssiFilterPeriod; v_BOOL_t fIgnoreDtim; v_U8_t fMaxLIModulatedDTIM; v_U8_t nRxAnt; v_U8_t fEnableFwHeartBeatMonitoring; v_U8_t fEnableFwBeaconFiltering; v_BOOL_t fEnableFwRssiMonitoring; v_U8_t nDataInactivityTimeout; v_U8_t nthBeaconFilter; //WMM QoS Configuration hdd_wmm_user_mode_t WmmMode; v_BOOL_t b80211eIsEnabled; v_U8_t UapsdMask; // what ACs to setup U-APSD for at assoc v_U32_t InfraUapsdVoSrvIntv; v_U32_t InfraUapsdVoSuspIntv; v_U32_t InfraUapsdViSrvIntv; v_U32_t InfraUapsdViSuspIntv; v_U32_t InfraUapsdBeSrvIntv; v_U32_t InfraUapsdBeSuspIntv; v_U32_t InfraUapsdBkSrvIntv; v_U32_t InfraUapsdBkSuspIntv; #ifdef FEATURE_WLAN_LFR v_BOOL_t isFastRoamIniFeatureEnabled; v_BOOL_t MAWCEnabled; #endif #ifdef FEATURE_WLAN_ESE v_U32_t InfraInactivityInterval; v_BOOL_t isEseIniFeatureEnabled; #endif #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) v_BOOL_t isFastTransitionEnabled; v_U8_t RoamRssiDiff; v_U8_t nImmediateRoamRssiDiff; v_BOOL_t isWESModeEnabled; #endif #ifdef FEATURE_WLAN_OKC v_BOOL_t isOkcIniFeatureEnabled; #endif #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD v_BOOL_t isRoamOffloadScanEnabled; v_BOOL_t isPERRoamEnabled; v_BOOL_t isPERRoamRxPathEnabled; v_BOOL_t isPERRoamCCAEnabled; v_S15_t PERRoamFullScanThreshold; v_S15_t PERMinRssiThresholdForRoam; v_U16_t rateUpThreshold; v_U16_t rateDownThreshold; v_U16_t PERroamTriggerPercent; v_U32_t waitPeriodForNextPERScan; v_U32_t PERtimerThreshold; v_U32_t PERroamRxPktsThreshold; #endif #ifdef WLAN_FEATURE_LFR_MBB tANI_BOOLEAN enable_lfr_mbb; #endif hdd_wmm_classification_t PktClassificationBasis; // DSCP or 802.1Q v_BOOL_t bImplicitQosEnabled; /* default TSPEC parameters for AC_VO */ sme_QosWmmDirType InfraDirAcVo; v_U16_t InfraNomMsduSizeAcVo; v_U32_t InfraMeanDataRateAcVo; v_U32_t InfraMinPhyRateAcVo; v_U16_t InfraSbaAcVo; /* default TSPEC parameters for AC_VI */ sme_QosWmmDirType InfraDirAcVi; v_U16_t InfraNomMsduSizeAcVi; v_U32_t InfraMeanDataRateAcVi; v_U32_t InfraMinPhyRateAcVi; v_U16_t InfraSbaAcVi; /* default TSPEC parameters for AC_BE */ sme_QosWmmDirType InfraDirAcBe; v_U16_t InfraNomMsduSizeAcBe; v_U32_t InfraMeanDataRateAcBe; v_U32_t InfraMinPhyRateAcBe; v_U16_t InfraSbaAcBe; /* default TSPEC parameters for AC_BK */ sme_QosWmmDirType InfraDirAcBk; v_U16_t InfraNomMsduSizeAcBk; v_U32_t InfraMeanDataRateAcBk; v_U32_t InfraMinPhyRateAcBk; v_U16_t InfraSbaAcBk; /* TL related configuration */ v_U8_t WfqBkWeight; v_U8_t WfqBeWeight; v_U8_t WfqViWeight; v_U8_t WfqVoWeight; v_U32_t DelayedTriggerFrmInt; v_U16_t BkReorderAgingTime; v_U16_t BeReorderAgingTime; v_U16_t ViReorderAgingTime; v_U16_t VoReorderAgingTime; v_BOOL_t enablePNReplay; /* Wowl pattern */ char wowlPattern[1024]; /* Control for Replay counetr. value 1 means single replay counter for all TID*/ v_BOOL_t bSingleTidRc; v_U8_t mcastBcastFilterSetting; v_BOOL_t fhostArpOffload; v_BOOL_t fhostNSOffload; v_BOOL_t burstSizeDefinition; v_U8_t tsInfoAckPolicy; /* RF Settling Time Clock */ v_U32_t rfSettlingTimeUs; v_U8_t enableBtAmp; #ifdef WLAN_BTAMP_FEATURE v_U8_t preferredChannel; #endif //WLAN_BTAMP_FEATURE v_U8_t dynamicPsPollValue; v_BOOL_t AddTSWhenACMIsOff; v_BOOL_t fValidateScanList; v_U32_t infraStaKeepAlivePeriod; v_U8_t nNullDataApRespTimeout; v_U8_t nBandCapability; v_U32_t apDataAvailPollPeriodInMs; v_BOOL_t fEnableBeaconEarlyTermination; v_BOOL_t teleBcnWakeupEn; /* VOS Trace Control*/ v_U16_t vosTraceEnableBAP; v_U16_t vosTraceEnableTL; v_U16_t vosTraceEnableWDI; v_U16_t vosTraceEnableHDD; v_U16_t vosTraceEnableSME; v_U16_t vosTraceEnablePE; v_U16_t vosTraceEnablePMC; v_U16_t vosTraceEnableWDA; v_U16_t vosTraceEnableSYS; v_U16_t vosTraceEnableVOSS; v_U16_t vosTraceEnableSAP; v_U16_t vosTraceEnableHDDSAP; /* WDI Trace Control */ v_U32_t wdiTraceEnableDAL; v_U32_t wdiTraceEnableCTL; v_U32_t wdiTraceEnableDAT; v_U32_t wdiTraceEnablePAL; v_U16_t nTeleBcnTransListenInterval; v_U16_t nTeleBcnMaxListenInterval; v_U16_t nTeleBcnTransLiNumIdleBeacons; v_U16_t nTeleBcnMaxLiNumIdleBeacons; v_U8_t bcnEarlyTermWakeInterval; v_U32_t enableCloseLoop; v_U8_t enableBypass11d; v_U8_t enableDFSChnlScan; v_U8_t enableDFSPnoChnlScan; v_U8_t enableDynamicDTIM; v_U8_t enableAutomaticTxPowerControl; v_U8_t ShortGI40MhzEnable; eHddLinkSpeedReportType reportMaxLinkSpeed; v_S31_t linkSpeedRssiHigh; #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) v_BOOL_t nRoamPrefer5GHz; v_BOOL_t nRoamIntraBand; v_U8_t nProbes; v_U16_t nRoamScanHomeAwayTime; #endif v_S31_t linkSpeedRssiMid; v_S31_t linkSpeedRssiLow; v_U8_t enableMCC; v_U8_t allowMCCGODiffBI; v_BOOL_t isP2pDeviceAddrAdministrated; v_U8_t thermalMitigationEnable; #ifdef WLAN_FEATURE_11AC v_U8_t vhtChannelWidth; v_U8_t vhtRxMCS; v_U8_t vhtTxMCS; v_BOOL_t enableTxBF; v_U8_t txBFCsnValue; v_BOOL_t enableMuBformee; v_U8_t gVhtMaxAmpduLenExp; #endif v_U8_t enableModulatedDTIM; v_U32_t fEnableMCAddrList; v_BOOL_t enableFirstScan2GOnly; v_BOOL_t skipDfsChnlInP2pSearch; v_BOOL_t ignoreDynamicDtimInP2pMode; v_U16_t configMccParam; v_U32_t numBuffAdvert; v_BOOL_t enableRxSTBC; v_BOOL_t enableTxSTBC; #ifdef FEATURE_WLAN_TDLS v_BOOL_t fEnableTDLSSupport; v_BOOL_t fEnableTDLSImplicitTrigger; v_U32_t fTDLSTxStatsPeriod; v_U32_t fTDLSTxPacketThreshold; v_U32_t fTDLSDiscoveryPeriod; v_U32_t fTDLSMaxDiscoveryAttempt; v_U32_t fTDLSIdleTimeout; v_U32_t fTDLSIdlePacketThreshold; v_U32_t fTDLSRSSIHysteresis; v_S31_t fTDLSRSSITriggerThreshold; v_S31_t fTDLSRSSITeardownThreshold; v_U32_t fTDLSUapsdMask; // what ACs to setup U-APSD for TDLS v_U32_t fEnableTDLSBufferSta; v_U32_t fTDLSPuapsdInactivityTimer; v_U32_t fTDLSRxFrameThreshold; v_BOOL_t fTDLSExternalControl; v_U32_t fEnableTDLSOffChannel; v_U32_t fEnableTDLSWmmMode; v_BOOL_t fEnableTDLSScanCoexSupport; v_BOOL_t fEnableTDLSScan; #endif #ifdef WLAN_FEATURE_LINK_LAYER_STATS v_BOOL_t fEnableLLStats; #endif #ifdef WLAN_FEATURE_EXTSCAN v_BOOL_t fEnableEXTScan; #endif #ifdef WLAN_SOFTAP_VSTA_FEATURE v_BOOL_t fEnableVSTASupport; #endif #ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE v_BOOL_t fEnableActiveModeOffload; #endif v_U32_t enableLpwrImgTransition; v_U32_t enable_conc_bmiss; v_U32_t enable_units_bwait; v_U8_t scanAgingTimeout; v_BOOL_t enableTxLdpc; v_U8_t disableLDPCWithTxbfAP; v_U8_t enableMCCAdaptiveScheduler; v_BOOL_t isAndroidPsEn; v_BOOL_t sapAllowAllChannel; v_U8_t retryLimitZero; v_U8_t retryLimitOne; v_U8_t retryLimitTwo; v_U8_t disableAggWithBtc; char listOfNonDfsCountryCode[128]; v_BOOL_t enableSSR; char listOfNon11acCountryCode[128]; v_U32_t cfgMaxMediumTime; v_U8_t enableTrafficMonitor; v_U32_t trafficIdleTimeout; v_BOOL_t enableVhtFor24GHzBand; v_U8_t fScanOffload; #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD /* Flag indicating whether legacy fast roam during concurrency is enabled in cfg.ini or not */ v_BOOL_t bFastRoamInConIniFeatureEnabled; #endif v_BOOL_t fEnableAdaptRxDrain; //TX and RX traffic threshold for split scan v_U8_t txRxThresholdForSplitScan; v_U8_t dynSplitscan; //Enable/Disable dynamic //splitscan //Traffic monitor timer for split scan v_U32_t trafficMntrTmrForSplitScan; v_U8_t flexConnectPowerFactor; v_BOOL_t enableIbssHeartBeatOffload; v_U32_t antennaDiversity; v_BOOL_t fEnableSNRMonitoring; /*PNO related parameters */ #ifdef FEATURE_WLAN_SCAN_PNO v_BOOL_t configPNOScanSupport; v_U32_t configPNOScanTimerRepeatValue; #endif v_U8_t isAmsduSupportInAMPDU; v_U8_t nSelect5GHzMargin; v_U8_t isCoalesingInIBSSAllowed; v_BOOL_t cfgAthDisable; v_U32_t cfgBtcActiveWlanLen; v_U32_t cfgBtcActiveBtLen; v_U32_t cfgBtcSapActiveWlanLen; v_U32_t cfgBtcSapActiveBtLen; #ifdef MEMORY_DEBUG v_BOOL_t IsMemoryDebugSupportEnabled; #endif char overrideCountryCode[4]; v_U32_t gAsdProbeInterval; v_S7_t gAsdTriggerThreshold; v_U32_t gAsdRTTRssiHystThreshold; v_BOOL_t debugP2pRemainOnChannel; v_U32_t cfgBtcCTS2SduringSCO; v_U32_t gEnableDebugLog; v_U16_t nOBSSScanActiveDwellTime; v_U16_t nOBSSScanPassiveDwellTime; v_U16_t nOBSSScanWidthTriggerInterval; v_BOOL_t gEnableStrictRegulatoryForFCC; v_BOOL_t advertiseConcurrentOperation; v_U32_t defaultRateIndex24Ghz; v_BOOL_t sapEnable11AC; v_BOOL_t cfgRAFilterEnable; v_U16_t cfgRARateLimitInterval; v_U8_t allowDFSChannelRoam; #ifdef WLAN_LOGGING_SOCK_SVC_ENABLE //WLAN Logging v_U32_t wlanLoggingEnable; v_U32_t wlanLoggingFEToConsole; v_U32_t wlanLoggingNumBuf; v_U32_t wlanPerPktStatsLogEnable; v_U32_t wlanPerPktStatsNumBuf; #endif v_BOOL_t ignorePeerErpInfo; v_BOOL_t initialScanSkipDFSCh; v_U32_t cfgBtcFatalHidnSniffBlkGuidance; v_U32_t cfgBtcCriticalHidnSniffBlkGuidance; v_U32_t cfgBtcA2dpTxQueueThold; v_U32_t cfgBtcOppTxQueueThold; v_U32_t tcpDelAckComputeInterval; v_U32_t tcpDelAckThresholdHigh; v_U32_t tcpDelAckThresholdLow; #ifdef WLAN_FEATURE_11W v_U32_t pmfSaQueryMaxRetries; v_U32_t pmfSaQueryRetryInterval; #endif v_U32_t deferImpsTime; v_BOOL_t sendDeauthBeforeCon; v_U8_t enableMacSpoofing; v_BOOL_t disableP2PMacSpoofing; v_BOOL_t enableFatalEvent; v_BOOL_t enableMgmtLogging; v_BOOL_t enableBMUHWtracing; v_BOOL_t enableFWLogging; v_BOOL_t enableContFWLogging; v_U8_t minLoggingBufferSize; v_U8_t maxLoggingBufferSize; v_BOOL_t fenableCHAvoidance; v_U8_t gMaxConcurrentActiveSessions; v_U32_t enableDynamicWMMPS; v_U32_t maxUapsdConsecSP; v_U32_t maxUapsdConsecRxCnt; v_U32_t maxUapsdConsecTxCnt; v_U32_t uapsdConsecRxCntMeasWindow; v_U32_t uapsdConsecTxCntMeasWindow; v_U32_t maxPsPollInWmmUapsdMode; v_U32_t maxUapsdInactivityIntervals; v_U32_t burstModeTXOPValue; v_U8_t acsScanBandPreference; v_U16_t acsBandSwitchThreshold; v_U32_t enableDynamicRAStartRate; v_U32_t enableRtsCtsHtVht; #ifdef WLAN_FEATURE_AP_HT40_24G v_BOOL_t apHT40_24GEnabled; #endif v_U16_t gP2PListenDeferInterval; v_U8_t btcEnableIndTimerVal; v_U8_t btcFastWlanConnPref; v_U32_t dxeReplenishRXTimerVal; v_U32_t dxeSSREnable; v_U8_t multicast_host_msgs; v_BOOL_t toggleArpBDRates; v_U32_t btcStaticOppWlanIdleWlanLen; v_U32_t btcStaticOppWlanIdleBtLen; v_U32_t btc_disable_wlan_link_critical; v_U32_t linkFailTimeout; v_U32_t linkFailTxCnt; v_BOOL_t ignorePeerHTopMode; v_U8_t gOptimizeCAevent; v_U8_t gActivePassiveChCon; v_U32_t cfgExtScanConcMode; v_U16_t rps_mask; v_BOOL_t fEnableWifiConfig; v_BOOL_t crash_inject_enabled; v_U32_t enable_delack; v_BOOL_t disableBarWakeUp; v_U8_t max_chan_for_dwell_time_cfg; v_U16_t tdls_enable_defer_time; v_U8_t boffset_correction_enable; #ifdef DHCP_SERVER_OFFLOAD v_BOOL_t enable_dhcp_srv_offload; v_U32_t dhcp_max_num_clients; v_U8_t dhcp_srv_ip[IPADDR_STRING_LENGTH]; v_U8_t dhcp_start_lsb; #endif /* DHCP_SERVER_OFFLOAD */ #ifdef MDNS_OFFLOAD uint32_t enable_mdns_offload; uint8_t mdns_fqdn[MAX_MDNS_FQDN_LEN]; uint8_t mdns_uniquefqdn[MAX_MDNS_FQDN_LEN]; uint8_t mdns_resp_type_a[MAX_MDNS_RESP_LEN]; uint32_t mdns_resp_type_a_ipv4; uint8_t mdns_resp_type_txt[MAX_MDNS_RESP_LEN]; uint8_t mdns_resp_type_txt_content[MAX_MDNS_RESP_LEN]; uint8_t mdns_resp_type_ptr[MAX_MDNS_RESP_LEN]; uint8_t mdns_resp_type_ptr_dname[MAX_MDNS_RESP_LEN]; uint8_t mdns_resp_type_srv[MAX_MDNS_RESP_LEN]; uint16_t mdns_resp_type_srv_priority; uint16_t mdns_resp_type_srv_weight; uint16_t mdns_resp_type_srv_port; uint8_t mdns_resp_type_srv_target[MAX_MDNS_RESP_LEN]; #endif /* MDNS_OFFLOAD */ uint32_t enable_edca_params; uint32_t edca_vo_cwmin; uint32_t edca_vi_cwmin; uint32_t edca_bk_cwmin; uint32_t edca_be_cwmin; uint32_t edca_vo_cwmax; uint32_t edca_vi_cwmax; uint32_t edca_bk_cwmax; uint32_t edca_be_cwmax; uint32_t edca_vo_aifs; uint32_t edca_vi_aifs; uint32_t edca_bk_aifs; uint32_t edca_be_aifs; v_BOOL_t sendMgmtPktViaWQ5; v_BOOL_t sap_probe_resp_offload; v_BOOL_t disable_scan_during_sco; v_BOOL_t sap_internal_restart; #ifdef SAP_AUTH_OFFLOAD bool enable_sap_auth_offload; uint32_t sap_auth_offload_sec_type; uint8_t sap_auth_offload_key[WLAN_PSK_STRING_LENGTH]; #endif /* SAP_AUTH_OFFLOAD */ uint32_t max_sched_scan_plan_interval; uint32_t max_sched_scan_plan_iterations; uint32_t sta_auth_retries_for_code17; uint32_t trigger_nullframe_before_hb; bool force_scc_with_ecsa; uint8_t enable_rtt_support; uint32_t sta_sap_scc_on_dfs_chan; uint8_t enable_aggr_btc_sco_oui[9]; uint8_t num_buff_aggr_btc_sco; /* control marking indoor channel passive to disable */ bool disable_indoor_channel; uint32_t enable_power_save_offload; uint32_t btc_dyn_wlan_len; uint32_t btc_dyn_bt_len; uint32_t btc_dyn_bt_ext_len; uint32_t btc_dyn_num_bt_ext; bool indoor_channel_support; bool force_rsne_override; char enabledefaultSAP[CFG_CONCURRENT_IFACE_MAX_LEN]; #ifdef WLAN_FEATURE_SAE bool is_sae_enabled; bool enable_sae_for_sap; #endif #ifdef FEATURE_WLAN_LFR uint8_t bssid_blacklist_timeout; #endif #ifdef FEATURE_WLAN_SW_PTA bool is_sw_pta_enabled; #endif bool isPeriodicRoamScanEnabled; } hdd_config_t; /*--------------------------------------------------------------------------- Function declarations and documenation -------------------------------------------------------------------------*/ VOS_STATUS hdd_parse_config_ini(hdd_context_t *pHddCtx); VOS_STATUS hdd_set_sme_config( hdd_context_t *pHddCtx ); v_BOOL_t hdd_update_config_dat ( hdd_context_t *pHddCtx ); VOS_STATUS hdd_cfg_get_config(hdd_context_t *pHddCtx, char *pBuf, int buflen); eCsrPhyMode hdd_cfg_xlate_to_csr_phy_mode( eHddDot11Mode dot11Mode ); VOS_STATUS hdd_execute_config_command(hdd_context_t *pHddCtx, char *command); tANI_BOOLEAN hdd_is_okc_mode_enabled(hdd_context_t *pHddCtx); VOS_STATUS hdd_string_to_u8_array(char *str, tANI_U8 *intArray, tANI_U8 *len, tANI_U8 intArrayMaxLen, char *seperator, bool to_hex); #ifdef MDNS_OFFLOAD int hdd_string_to_string_array(char *data, uint8_t *datalist, char separator, uint8_t *num_entries, uint8_t max_entries, uint8_t max_len_entry); #endif /* MDNS_OFFLOAD */ #define VAR_OFFSET( _Struct, _Var ) (offsetof(_Struct, _Var)) #define VAR_SIZE( _Struct, _Var ) (sizeof(((_Struct *)0)->_Var)) #define VAR_FLAGS_NONE ( 0 ) #define VAR_FLAGS_REQUIRED ( 1 << 0 ) // bit 0 is Required or Optional #define VAR_FLAGS_OPTIONAL ( 0 << 0 ) #define VAR_FLAGS_RANGE_CHECK ( 1 << 1 ) // bit 1 tells if range checking is required. // If less than MIN, assume MIN. // If greater than MAX, assume MAX. #define VAR_FLAGS_RANGE_CHECK_ASSUME_MINMAX ( VAR_FLAGS_RANGE_CHECK ) #define VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT ( 1 << 2 ) // bit 2 is range checking that assumes the DEFAULT value // If less than MIN, assume DEFAULT, // If grateer than MAX, assume DEFAULT. #define VAR_FLAGS_DYNAMIC_CFG ( 1 << 3 ) // Bit 3 indicates that // the config item can be // modified dynamicially // on a running system typedef enum { WLAN_PARAM_Integer, WLAN_PARAM_SignedInteger, WLAN_PARAM_HexInteger, WLAN_PARAM_String, WLAN_PARAM_MacAddr, }WLAN_PARAMETER_TYPE; #define REG_VARIABLE( _Name, _Type, _Struct, _VarName, \ _Flags, _Default, _Min, _Max ) \ { \ ( _Name ), \ ( _Type ), \ ( _Flags ), \ VAR_OFFSET( _Struct, _VarName ), \ VAR_SIZE( _Struct, _VarName ), \ ( _Default ), \ ( _Min ), \ ( _Max ), \ NULL, \ 0 \ } #define REG_DYNAMIC_VARIABLE( _Name, _Type, _Struct, _VarName, \ _Flags, _Default, _Min, _Max, \ _CBFunc, _CBParam ) \ { \ ( _Name ), \ ( _Type ), \ ( VAR_FLAGS_DYNAMIC_CFG | ( _Flags ) ), \ VAR_OFFSET( _Struct, _VarName ), \ VAR_SIZE( _Struct, _VarName ), \ ( _Default ), \ ( _Min ), \ ( _Max ), \ ( _CBFunc ), \ ( _CBParam ) \ } #define REG_VARIABLE_STRING( _Name, _Type, _Struct, _VarName, \ _Flags, _Default ) \ { \ ( _Name ), \ ( _Type ), \ ( _Flags ), \ VAR_OFFSET( _Struct, _VarName ), \ VAR_SIZE( _Struct, _VarName ), \ (unsigned long)( _Default ), \ 0, \ 0, \ NULL, \ 0 \ } typedef struct tREG_TABLE_ENTRY { char* RegName; // variable name in the qcom_cfg.ini file WLAN_PARAMETER_TYPE RegType; // variable type in the hdd_config_t structure unsigned long Flags; // Specify optional parms and if RangeCheck is performed unsigned short VarOffset; // offset to field from the base address of the structure unsigned short VarSize; // size (in bytes) of the field unsigned long VarDefault; // default value to use unsigned long VarMin; // minimum value, for range checking unsigned long VarMax; // maximum value, for range checking // Dynamic modification notifier void (*pfnDynamicNotify)(hdd_context_t *pHddCtx, unsigned long NotifyId); unsigned long NotifyId; // Dynamic modification identifier } REG_TABLE_ENTRY; static __inline unsigned long utilMin( unsigned long a, unsigned long b ) { return( ( a < b ) ? a : b ); } #endif