/* * Copyright (c) 2012-2017, 2019 The Linux Foundation. All rights reserved. * * Previously licensed under the ISC license by Qualcomm Atheros, Inc. * * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* * This file was originally distributed by Qualcomm Atheros, Inc. * under proprietary terms before Copyright ownership was assigned * to the Linux Foundation. */ #if !defined( __LIM_SESSION_H ) #define __LIM_SESSION_H /**========================================================================= \file limSession.h \brief prototype for lim Session related APIs \author Sunit Bhatia ========================================================================*/ /*-------------------------------------------------------------------------- Include Files ------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------- Preprocessor definitions and constants ------------------------------------------------------------------------*/ #define NUM_WEP_KEYS 4 /*-------------------------------------------------------------------------- Type declarations ------------------------------------------------------------------------*/ typedef struct { tSirMacBeaconInterval beaconInterval; tANI_U8 fShortPreamble; tANI_U8 llaCoexist; tANI_U8 llbCoexist; tANI_U8 llgCoexist; tANI_U8 ht20Coexist; tANI_U8 llnNonGFCoexist; tANI_U8 fRIFSMode; tANI_U8 fLsigTXOPProtectionFullSupport; tANI_U8 gHTObssMode; }tBeaconParams, *tpBeaconParams; typedef struct sPESession // Added to Support BT-AMP { /* To check session table is in use or free*/ tANI_U8 available; tANI_U8 peSessionId; tANI_U8 smeSessionId; tANI_U16 transactionId; //In AP role: BSSID and selfMacAddr will be the same. //In STA role: they will be different tSirMacAddr bssId; tSirMacAddr selfMacAddr; tSirMacSSid ssId; tANI_U8 bssIdx; tANI_U8 valid; tLimMlmStates limMlmState; //MLM State tLimMlmStates limPrevMlmState; //Previous MLM State tLimSmeStates limSmeState; //SME State tLimSmeStates limPrevSmeState; //Previous SME State tLimSystemRole limSystemRole; tSirBssType bssType; tANI_U8 operMode; // AP - 0; STA - 1 ; tSirNwType nwType; tpSirSmeStartBssReq pLimStartBssReq; //handle to smestart bss req tANI_BOOLEAN bOSENAssociation; //handle to OSEN assoc req tANI_BOOLEAN bWPSAssociation; //WPS Registration tpSirSmeJoinReq pLimJoinReq; // handle to sme join req tpSirSmeJoinReq pLimReAssocReq; //handle to sme reassoc req tpLimMlmJoinReq pLimMlmJoinReq; //handle to MLM join Req #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) void *pLimMlmReassocRetryReq; //keep reasoc req for retry #endif void *pLimMlmReassocReq; //handle to MLM reassoc Req tANI_U16 channelChangeReasonCode; tANI_U16 channelChangeCSA; // channel change flag for CSA tANI_U8 dot11mode; tANI_U8 htCapability; /* Supported Channel Width Set: 0-20MHz 1 - 40MHz */ tANI_U8 htSupportedChannelWidthSet; /* Recommended Tx Width Set * 0 - use 20 MHz channel (control channel) * 1 - use channel width enabled under Supported Channel Width Set */ tANI_U8 htRecommendedTxWidthSet; /* Identifies the 40 MHz extension channel */ ePhyChanBondState htSecondaryChannelOffset; tSirRFBand limRFBand; tANI_U8 limIbssActive; //TO SUPPORT CONCURRENCY /* These global varibales moved to session Table to support BT-AMP : Oct 9th review */ tAniAuthType limCurrentAuthType; tANI_U16 limCurrentBssCaps; tANI_U8 limCurrentBssQosCaps; tANI_U16 limCurrentBssPropCap; tANI_U8 limSentCapsChangeNtf; tANI_U16 limAID; /* Parameters For Reassociation */ tSirMacAddr limReAssocbssId; tSirMacChanNum limReassocChannelId; /* CB paramaters required/duplicated for Reassoc since re-assoc mantains its own params in lim */ tANI_U8 reAssocHtSupportedChannelWidthSet; tANI_U8 reAssocHtRecommendedTxWidthSet; ePhyChanBondState reAssocHtSecondaryChannelOffset; tSirMacSSid limReassocSSID; tANI_U16 limReassocBssCaps; tANI_U8 limReassocBssQosCaps; tANI_U16 limReassocBssPropCap; // Assoc or ReAssoc Response Data/Frame void *limAssocResponseData; /** BSS Table parameters **/ /* * staId: Start BSS: this is the Sta Id for the BSS. Join: this is the selfStaId In both cases above, the peer STA ID wll be stored in dph hash table. */ tANI_U16 staId; tANI_U16 statypeForBss; //to know session is for PEER or SELF tANI_U8 shortSlotTimeSupported; tANI_U8 dtimPeriod; tSirMacRateSet rateSet; tSirMacRateSet extRateSet; tSirMacHTOperatingMode htOperMode; tANI_U8 currentOperChannel; tANI_U8 currentReqChannel; tANI_U8 LimRxedBeaconCntDuringHB; //Time stamp of the last beacon received from the BSS to which STA is connected. tANI_U64 lastBeaconTimeStamp; //RX Beacon count for the current BSS to which STA is connected. tANI_U32 currentBssBeaconCnt; tANI_U8 lastBeaconDtimCount; tANI_U8 lastBeaconDtimPeriod; tANI_U32 bcnLen; tANI_U8 *beacon; //Used to store last beacon / probe response before assoc. tANI_U32 assocReqLen; tANI_U8 *assocReq; //Used to store association request frame sent out while associating. tANI_U32 assocRspLen; tANI_U8 *assocRsp; //Used to store association response received while associating tAniSirDph dph; void * *parsedAssocReq; //Used to store parsed assoc req from various requesting station #ifdef WLAN_FEATURE_VOWIFI_11R tANI_U32 RICDataLen; //Used to store the Ric data received in the assoc response tANI_U8 *ricData; #endif #ifdef FEATURE_WLAN_ESE tANI_U32 tspecLen; //Used to store the TSPEC IEs received in the assoc response tANI_U8 *tspecIes; #endif tANI_U32 encryptType; tANI_BOOLEAN bTkipCntrMeasActive; // Used to keep record of TKIP counter measures start/stop tANI_U8 gLimProtectionControl; //used for 11n protection tANI_U8 gHTNonGFDevicesPresent; //protection related config cache tCfgProtection cfgProtection; // Number of legacy STAs associated tLimProtStaParams gLim11bParams; // Number of 11A STAs associated tLimProtStaParams gLim11aParams; // Number of non-ht non-legacy STAs associated tLimProtStaParams gLim11gParams; //Number of nonGf STA associated tLimProtStaParams gLimNonGfParams; //Number of HT 20 STAs associated tLimProtStaParams gLimHt20Params; //Number of Lsig Txop not supported STAs associated tLimProtStaParams gLimLsigTxopParams; // Number of STAs that do not support short preamble tLimNoShortParams gLimNoShortParams; // Number of STAs that do not support short slot time tLimNoShortSlotParams gLimNoShortSlotParams; // OLBC parameters tLimProtStaParams gLimOlbcParams; // OLBC parameters tLimProtStaParams gLimOverlap11gParams; tLimProtStaParams gLimOverlap11aParams; tLimProtStaParams gLimOverlapHt20Params; tLimProtStaParams gLimOverlapNonGfParams; //cache for each overlap tCacheParams protStaCache[LIM_PROT_STA_CACHE_SIZE]; tANI_U8 privacy; tAniAuthType authType; tSirKeyMaterial WEPKeyMaterial[NUM_WEP_KEYS]; tDot11fIERSN gStartBssRSNIe; tDot11fIEWPA gStartBssWPAIe; tSirAPWPSIEs APWPSIEs; tANI_U8 apUapsdEnable; tSirWPSPBCSession *pAPWPSPBCSession; tANI_U32 DefProbeRspIeBitmap[8]; tANI_U32 proxyProbeRspEn; tDot11fProbeResponse probeRespFrame; tANI_U8 ssidHidden; tANI_BOOLEAN fwdWPSPBCProbeReq; tANI_U8 wps_state; tANI_U8 limQosEnabled:1; //11E tANI_U8 limWmeEnabled:1; //WME tANI_U8 limWsmEnabled:1; //WSM tANI_U8 limHcfEnabled:1; tANI_U8 lim11dEnabled:1; #ifdef WLAN_FEATURE_11W tANI_U8 limRmfEnabled:1; //11W #endif tANI_U32 lim11hEnable; tPowerdBm maxTxPower; //MIN (Regulatory and local power constraint) tVOS_CON_MODE pePersona; #if defined WLAN_FEATURE_VOWIFI tPowerdBm txMgmtPower; #endif #ifdef WLAN_FEATURE_VOWIFI_11R tAniBool is11Rconnection; #endif #ifdef FEATURE_WLAN_ESE tAniBool isESEconnection; tEsePEContext eseContext; #endif #if defined WLAN_FEATURE_VOWIFI_11R || defined FEATURE_WLAN_ESE || defined(FEATURE_WLAN_LFR) tAniBool isFastTransitionEnabled; #endif #ifdef FEATURE_WLAN_LFR tAniBool isFastRoamIniFeatureEnabled; #endif tSirNoAParam p2pNoA; tSirP2PNoaAttr p2pGoPsUpdate; tANI_U32 defaultAuthFailureTimeout; tSirP2PNoaStart p2pGoPsNoaStartInd; /* EDCA QoS parameters * gLimEdcaParams - These EDCA parameters are used locally on AP or STA. * If STA, then these are values taken from the Assoc Rsp when associating, * or Beacons/Probe Response after association. If AP, then these are * values originally set locally on AP. * * gLimEdcaParamsBC - These EDCA parameters are use by AP to broadcast * to other STATIONs in the BSS. * * gLimEdcaParamsActive: These EDCA parameters are what's actively being * used on station. Specific AC values may be downgraded depending on * admission control for that particular AC. */ tSirMacEdcaParamRecord gLimEdcaParams[MAX_NUM_AC]; //used locally tSirMacEdcaParamRecord gLimEdcaParamsBC[MAX_NUM_AC]; //used for broadcast tSirMacEdcaParamRecord gLimEdcaParamsActive[MAX_NUM_AC]; tANI_U8 gLimEdcaParamSetCount; tBeaconParams beaconParams; #ifdef WLAN_FEATURE_11AC tANI_U8 vhtCapability; tANI_U8 vhtTxChannelWidthSet; tLimOperatingModeInfo gLimOperatingMode; tLimWiderBWChannelSwitchInfo gLimWiderBWChannelSwitch; tANI_U8 vhtCapabilityPresentInBeacon; tANI_U8 apCenterChan; tANI_U8 apChanWidth; tANI_U8 txBFIniFeatureEnabled; tANI_U8 txMuBformee; #endif tANI_U8 spectrumMgtEnabled; /* *********************11H related*****************************/ //tANI_U32 gLim11hEnable; tLimSpecMgmtInfo gLimSpecMgmt; bool include_ecsa_ie; bool include_wide_ch_bw_ie; // CB Primary/Secondary Channel Switch Info tLimChannelSwitchInfo gLimChannelSwitch; /* *********************End 11H related*****************************/ /*Flag to Track Status/Indicate HBFailure on this session */ tANI_BOOLEAN LimHBFailureStatus; tANI_U32 gLimPhyMode; tANI_U8 amsduSupportedInBA; tANI_U8 txLdpcIniFeatureEnabled; /** * Following is the place holder for free peer index pool. * A non-zero value indicates that peer index is available * for assignment. */ tANI_U8 *gpLimPeerIdxpool; tANI_U8 freePeerIdxHead; tANI_U8 freePeerIdxTail; tANI_U16 gLimNumOfCurrentSTAs; #ifdef FEATURE_WLAN_TDLS tANI_U32 peerAIDBitmap[2]; tANI_BOOLEAN tdlsChanSwitProhibited; #endif tANI_BOOLEAN fWaitForProbeRsp; tANI_BOOLEAN fIgnoreCapsChange; tANI_BOOLEAN fDeauthReceived; #ifdef FEATURE_WLAN_DIAG_SUPPORT_LIM tANI_S8 rssi; #endif tANI_U8 isAmsduSupportInAMPDU; tANI_U8 isCoalesingInIBSSAllowed; tANI_BOOLEAN isCiscoVendorAP; /* To hold OBSS Scan IE Parameters */ tSirOBSSHT40Param obssHT40ScanParam; /* HS 2.0 Indication */ tDot11fIEhs20vendor_ie hs20vendor_ie; /* flag to indicate country code in beacon */ tANI_U8 countryInfoPresent; /* DSCP to UP mapping for HS 2.0 */ tSirQosMapSet QosMapSet; tANI_U8 isKeyInstalled; tANI_BOOLEAN is11Gonly; tANI_BOOLEAN addBssfailed; tDot11fIEExtCap ExtCap; uint32_t sta_auth_retries_for_code17; tDot11fIEHTCaps ht_caps; tDot11fIEVHTCaps vht_caps; tDot11fIEHTInfo ht_operation; tDot11fIEVHTOperation vht_operation; bool force_24ghz_in_ht20; int8_t def_max_tx_pwr; bool sae_pmk_cached; }tPESession, *tpPESession; #define LIM_MAX_ACTIVE_SESSIONS 4 /*------------------------------------------------------------------------- Function declarations and documenation ------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------- \brief peCreateSession() - creates a new PE session given the BSSID This function returns the session context and the session ID if the session corresponding to the passed BSSID is found in the PE session table. \param pMac - pointer to global adapter context \param bssid - BSSID of the new session \param sessionId -session ID is returned here, if session is created. \return tpPESession - pointer to the session context or NULL if session can not be created. \sa --------------------------------------------------------------------------*/ tpPESession peCreateSession(tpAniSirGlobal pMac, tANI_U8 *bssid , tANI_U8* sessionId, tANI_U16 numSta); /*-------------------------------------------------------------------------- \brief peFindSessionByBssid() - looks up the PE session given the BSSID. This function returns the session context and the session ID if the session corresponding to the given BSSID is found in the PE session table. \param pMac - pointer to global adapter context \param bssid - BSSID of the session \param sessionId -session ID is returned here, if session is found. \return tpPESession - pointer to the session context or NULL if session is not found. \sa --------------------------------------------------------------------------*/ tpPESession peFindSessionByBssid(tpAniSirGlobal pMac, tANI_U8* bssid, tANI_U8* sessionId); /*-------------------------------------------------------------------------- \brief peFindSessionByBssIdx() - looks up the PE session given the bssIdx. This function returns the session context if the session corresponding to the given bssIdx is found in the PE session table. \param pMac - pointer to global adapter context \param bssIdx - bss index of the session \return tpPESession - pointer to the session context or NULL if session is not found. \sa --------------------------------------------------------------------------*/ tpPESession peFindSessionByBssIdx(tpAniSirGlobal pMac, tANI_U8 bssIdx); tANI_S8 limGetInfraSessionId(tpAniSirGlobal pMac); /*-------------------------------------------------------------------------- \brief peFindSessionByPeerSta() - looks up the PE session given the Peer Station Address. This function returns the session context and the session ID if the session corresponding to the given destination address is found in the PE session table. \param pMac - pointer to global adapter context \param sa - Peer STA Address of the session \param sessionId -session ID is returned here, if session is found. \return tpPESession - pointer to the session context or NULL if session is not found. \sa --------------------------------------------------------------------------*/ tpPESession peFindSessionByPeerSta(tpAniSirGlobal pMac, tANI_U8* sa, tANI_U8* sessionId); /*-------------------------------------------------------------------------- \brief peFindSessionBySessionId() - looks up the PE session given the session ID. This function returns the session context if the session corresponding to the given session ID is found in the PE session table. \param pMac - pointer to global adapter context \param sessionId -session ID for which session context needs to be looked up. \return tpPESession - pointer to the session context or NULL if session is not found. \sa --------------------------------------------------------------------------*/ tpPESession peFindSessionBySessionId(tpAniSirGlobal pMac , tANI_U8 sessionId); /*-------------------------------------------------------------------------- \brief peFindSessionByBssid() - looks up the PE session given staid. This function returns the session context and the session ID if the session corresponding to the given StaId is found in the PE session table. \param pMac - pointer to global adapter context \param staid - StaId of the session \param sessionId - session ID is returned here, if session is found. \return tpPESession - pointer to the session context or NULL if session is not found. --------------------------------------------------------------------------*/ tpPESession peFindSessionByStaId(tpAniSirGlobal pMac, tANI_U8 staid, tANI_U8* sessionId); /** * pe_find_session_by_sme_session_id() - looks up the PE session for given sme * session id * @mac_ctx: pointer to global adapter context * @sme_session_id: sme session id * * Looks up the PE session for given sme session id * * Return: pe session entry for given sme session if found else NULL */ tpPESession pe_find_session_by_sme_session_id(tpAniSirGlobal mac_ctx, uint8_t sme_session_id); /*-------------------------------------------------------------------------- \brief peDeleteSession() - deletes the PE session given the session ID. \param pMac - pointer to global adapter context \param sessionId -session ID of the session which needs to be deleted. \sa --------------------------------------------------------------------------*/ void peDeleteSession(tpAniSirGlobal pMac, tpPESession psessionEntry); /*-------------------------------------------------------------------------- \brief peDeleteSession() - Returns the SME session ID and Transaction ID . \param pMac - pointer to global adapter context \param sessionId -session ID of the session which needs to be deleted. \sa --------------------------------------------------------------------------*/ int peFindBssIdxFromSmeSessionId(tpAniSirGlobal pMac, tANI_U8 sme_sessionId); #endif //#if !defined( __LIM_SESSION_H )