/* * Copyright (c) 2011-2020 The Linux Foundation. All rights reserved. * * Previously licensed under the ISC license by Qualcomm Atheros, Inc. * * * Permission to use, copy, modify, and/or distribute this software for * any purpose with or without fee is hereby granted, provided that the * above copyright notice and this permission notice appear in all * copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* * This file was originally distributed by Qualcomm Atheros, Inc. * under proprietary terms before Copyright ownership was assigned * to the Linux Foundation. */ /** ------------------------------------------------------------------------- * ------------------------------------------------------------------------- * \file csrApi.h Exports and types for the Common Scan and Roaming Module interfaces. ========================================================================== */ #ifndef CSRAPI_H__ #define CSRAPI_H__ #include "sirApi.h" #include "sirMacProtDef.h" #include "csrLinkList.h" typedef enum { eCSR_AUTH_TYPE_NONE, //never used // MAC layer authentication types eCSR_AUTH_TYPE_OPEN_SYSTEM, eCSR_AUTH_TYPE_SHARED_KEY, eCSR_AUTH_TYPE_SAE, eCSR_AUTH_TYPE_AUTOSWITCH, // Upper layer authentication types eCSR_AUTH_TYPE_WPA, eCSR_AUTH_TYPE_WPA_PSK, eCSR_AUTH_TYPE_WPA_NONE, eCSR_AUTH_TYPE_RSN, eCSR_AUTH_TYPE_RSN_PSK, #if defined WLAN_FEATURE_VOWIFI_11R eCSR_AUTH_TYPE_FT_RSN, eCSR_AUTH_TYPE_FT_RSN_PSK, #endif #ifdef FEATURE_WLAN_WAPI eCSR_AUTH_TYPE_WAPI_WAI_CERTIFICATE, eCSR_AUTH_TYPE_WAPI_WAI_PSK, #endif /* FEATURE_WLAN_WAPI */ #ifdef FEATURE_WLAN_ESE eCSR_AUTH_TYPE_CCKM_WPA, eCSR_AUTH_TYPE_CCKM_RSN, #endif /* FEATURE_WLAN_ESE */ #ifdef WLAN_FEATURE_11W eCSR_AUTH_TYPE_RSN_PSK_SHA256, eCSR_AUTH_TYPE_RSN_8021X_SHA256, #endif eCSR_AUTH_TYPE_OWE, eCSR_NUM_OF_SUPPORT_AUTH_TYPE, eCSR_AUTH_TYPE_FAILED = 0xff, eCSR_AUTH_TYPE_UNKNOWN = eCSR_AUTH_TYPE_FAILED, }eCsrAuthType; typedef enum { eCSR_ENCRYPT_TYPE_NONE, eCSR_ENCRYPT_TYPE_WEP40_STATICKEY, eCSR_ENCRYPT_TYPE_WEP104_STATICKEY, eCSR_ENCRYPT_TYPE_WEP40, eCSR_ENCRYPT_TYPE_WEP104, eCSR_ENCRYPT_TYPE_TKIP, eCSR_ENCRYPT_TYPE_AES, #ifdef FEATURE_WLAN_WAPI eCSR_ENCRYPT_TYPE_WPI, //WAPI #endif /* FEATURE_WLAN_WAPI */ #ifdef FEATURE_WLAN_ESE eCSR_ENCRYPT_TYPE_KRK, #endif /* FEATURE_WLAN_ESE */ #ifdef WLAN_FEATURE_11W //11w BIP eCSR_ENCRYPT_TYPE_AES_CMAC, #endif eCSR_ENCRYPT_TYPE_ANY, eCSR_NUM_OF_ENCRYPT_TYPE = eCSR_ENCRYPT_TYPE_ANY, eCSR_ENCRYPT_TYPE_FAILED = 0xff, eCSR_ENCRYPT_TYPE_UNKNOWN = eCSR_ENCRYPT_TYPE_FAILED, }eCsrEncryptionType; /*--------------------------------------------------------------------------- Enumeration of the various Security types ---------------------------------------------------------------------------*/ typedef enum { eCSR_SECURITY_TYPE_WPA, eCSR_SECURITY_TYPE_RSN, #ifdef FEATURE_WLAN_WAPI eCSR_SECURITY_TYPE_WAPI, #endif /* FEATURE_WLAN_WAPI */ eCSR_SECURITY_TYPE_UNKNOWN, }eCsrSecurityType; typedef enum { eCSR_DOT11_MODE_TAURUS = 0, //This mean everything because it covers all thing we support eCSR_DOT11_MODE_abg = 0x0001, //11a/b/g only, no HT, no proprietary eCSR_DOT11_MODE_11a = 0x0002, eCSR_DOT11_MODE_11b = 0x0004, eCSR_DOT11_MODE_11g = 0x0008, eCSR_DOT11_MODE_11n = 0x0010, eCSR_DOT11_MODE_POLARIS = 0x0020, eCSR_DOT11_MODE_TITAN = 0x0040, eCSR_DOT11_MODE_11g_ONLY = 0x0080, eCSR_DOT11_MODE_11n_ONLY = 0x0100, eCSR_DOT11_MODE_TAURUS_ONLY = 0x0200, eCSR_DOT11_MODE_11b_ONLY = 0x0400, eCSR_DOT11_MODE_11a_ONLY = 0x0800, #ifdef WLAN_FEATURE_11AC eCSR_DOT11_MODE_11ac = 0x1000, eCSR_DOT11_MODE_11ac_ONLY = 0x2000, #endif //This is for WIFI test. It is same as eWNIAPI_MAC_PROTOCOL_ALL except when it starts IBSS in 11B of 2.4GHz //It is for CSR internal use eCSR_DOT11_MODE_AUTO = 0x4000, eCSR_NUM_PHY_MODE = 16, //specify the number of maximum bits for phyMode }eCsrPhyMode; typedef tANI_U8 tCsrBssid[WNI_CFG_BSSID_LEN]; typedef enum { eCSR_BSS_TYPE_NONE, eCSR_BSS_TYPE_INFRASTRUCTURE, eCSR_BSS_TYPE_INFRA_AP, // SoftAP AP eCSR_BSS_TYPE_IBSS, // an IBSS network we will NOT start eCSR_BSS_TYPE_START_IBSS, // an IBSS network we will start if no partners detected. eCSR_BSS_TYPE_WDS_AP, // BT-AMP AP eCSR_BSS_TYPE_WDS_STA, // BT-AMP station eCSR_BSS_TYPE_ANY, // any BSS type (IBSS or Infrastructure). }eCsrRoamBssType; typedef enum { eCSR_SCAN_REQUEST_11D_SCAN = 1, eCSR_SCAN_REQUEST_FULL_SCAN, eCSR_SCAN_IDLE_MODE_SCAN, eCSR_SCAN_HO_BG_SCAN, // bg scan request in NRT & RT Handoff sub-states eCSR_SCAN_HO_PROBE_SCAN, // directed probe on an entry from the candidate list eCSR_SCAN_HO_NT_BG_SCAN, // bg scan request in NT sub-state eCSR_SCAN_P2P_DISCOVERY, eCSR_SCAN_SOFTAP_CHANNEL_RANGE, eCSR_SCAN_P2P_FIND_PEER, }eCsrRequestType; typedef enum { eCSR_SCAN_RESULT_GET = 0, eCSR_SCAN_RESULT_FLUSH = 1, //to delete all cached scan results }eCsrScanResultCmd; typedef enum { eCSR_SCAN_SUCCESS, eCSR_SCAN_FAILURE, eCSR_SCAN_ABORT, eCSR_SCAN_FOUND_PEER, }eCsrScanStatus; /* Reason to abort the scan * The reason can used later to decide whether to update the scan results * to upper layer or not */ typedef enum { eCSR_SCAN_ABORT_DEFAULT = 1, eCSR_SCAN_ABORT_DUE_TO_BAND_CHANGE, //Scan aborted due to band change }eCsrAbortReason; typedef enum { eCSR_INI_SINGLE_CHANNEL_CENTERED = 0, eCSR_INI_DOUBLE_CHANNEL_HIGH_PRIMARY, eCSR_INI_DOUBLE_CHANNEL_LOW_PRIMARY, #ifdef WLAN_FEATURE_11AC eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED, eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED, eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED, eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW, eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW, eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH, eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH, #endif eCSR_INI_CHANNEL_BONDING_STATE_MAX }eIniChanBondState; #define CSR_SCAN_TIME_DEFAULT 0 #define CSR_VALUE_IGNORED 0xFFFFFFFF #define CSR_RSN_PMKID_SIZE 16 #define CSR_RSN_MAX_PMK_LEN 48 #define CSR_MAX_PMKID_ALLOWED 32 #define CSR_WEP40_KEY_LEN 5 #define CSR_WEP104_KEY_LEN 13 #define CSR_TKIP_KEY_LEN 32 #define CSR_AES_KEY_LEN 16 #define CSR_MAX_TX_POWER ( WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMAX ) #define CSR_MAX_RSC_LEN 16 #ifdef FEATURE_WLAN_WAPI #define CSR_WAPI_BKID_SIZE 16 #define CSR_MAX_BKID_ALLOWED 16 #define CSR_WAPI_KEY_LEN 32 #define CSR_MAX_KEY_LEN ( CSR_WAPI_KEY_LEN ) //longest one is for WAPI #else #define CSR_MAX_KEY_LEN ( CSR_TKIP_KEY_LEN ) //longest one is for TKIP #endif /* FEATURE_WLAN_WAPI */ #ifdef FEATURE_WLAN_ESE #define CSR_KRK_KEY_LEN 16 #endif typedef struct tagCsrChannelInfo { tANI_U8 numOfChannels; tANI_U8 *ChannelList; //it will be an array of channels }tCsrChannelInfo, *tpCsrChannelInfo; typedef struct tagCsrSSIDInfo { tSirMacSSid SSID; tANI_BOOLEAN handoffPermitted; tANI_BOOLEAN ssidHidden; }tCsrSSIDInfo; typedef struct tagCsrSSIDs { tANI_U32 numOfSSIDs; tCsrSSIDInfo *SSIDList; //To be allocated for array of SSIDs }tCsrSSIDs; typedef struct tagCsrBSSIDs { tANI_U32 numOfBSSIDs; tCsrBssid *bssid; }tCsrBSSIDs; typedef struct tagCsrStaParams { tANI_U16 capability; tANI_U8 extn_capability[SIR_MAC_MAX_EXTN_CAP]; tANI_U8 supported_rates_len; tANI_U8 supported_rates[SIR_MAC_MAX_SUPP_RATES]; tANI_U8 htcap_present; tSirHTCap HTCap; tANI_U8 vhtcap_present; tSirVHTCap VHTCap; tANI_U8 uapsd_queues; tANI_U8 max_sp; tANI_U8 supported_channels_len; tANI_U8 supported_channels[SIR_MAC_MAX_SUPP_CHANNELS]; tANI_U8 supported_oper_classes_len; tANI_U8 supported_oper_classes[SIR_MAC_MAX_SUPP_OPER_CLASSES]; }tCsrStaParams; typedef struct tagCsrScanRequest { tSirScanType scanType; tCsrBssid bssid; eCsrRoamBssType BSSType; tCsrSSIDs SSIDs; tCsrChannelInfo ChannelInfo; tANI_U32 minChnTime; //in units of milliseconds tANI_U32 maxChnTime; //in units of milliseconds tANI_U32 min_chntime_btc_esco; //in units of milliseconds tANI_U32 max_chntime_btc_esco; //in units of milliseconds tANI_U32 restTime; //in units of milliseconds //ignored when not connected tANI_U32 uIEFieldLen; tANI_U8 *pIEField; bool scan_randomize; bool nl_scan; eCsrRequestType requestType; //11d scan or full scan tANI_BOOLEAN p2pSearch; tANI_BOOLEAN skipDfsChnlInP2pSearch; }tCsrScanRequest; typedef struct tagCsrBGScanRequest { tSirScanType scanType; tSirMacSSid SSID; tCsrChannelInfo ChannelInfo; tANI_U32 scanInterval; //in units of milliseconds tANI_U32 minChnTime; //in units of milliseconds tANI_U32 maxChnTime; //in units of milliseconds tANI_U32 min_chntime_btc_esco; //in units of milliseconds tANI_U32 max_chntime_btc_esco; //in units of milliseconds tANI_U32 restTime; //in units of milliseconds //ignored when not connected tANI_U32 throughputImpact; //specify whether BG scan cares about impacting throughput //ignored when not connected tCsrBssid bssid; //how to use it?? Apple }tCsrBGScanRequest, *tpCsrBGScanRequest; typedef struct tagCsrScanResultInfo { //Carry the IEs for the current BSSDescription. A pointer to tDot11fBeaconIEs. Maybe NULL for start BSS. void *pvIes; tAniSSID ssId; v_TIME_t timer; // timer is variable which is used for hidden SSID's timer value //This member must be the last in the structure because the end of tSirBssDescription is an // array with nonknown size at this time tSirBssDescription BssDescriptor; }tCsrScanResultInfo; typedef struct tagCsrEncryptionList { tANI_U32 numEntries; eCsrEncryptionType encryptionType[eCSR_NUM_OF_ENCRYPT_TYPE]; }tCsrEncryptionList, *tpCsrEncryptionList; typedef struct tagCsrAuthList { tANI_U32 numEntries; eCsrAuthType authType[eCSR_NUM_OF_SUPPORT_AUTH_TYPE]; }tCsrAuthList, *tpCsrAuthList; #ifdef WLAN_FEATURE_VOWIFI_11R typedef struct tagCsrMobilityDomainInfo { tANI_U8 mdiePresent; tANI_U16 mobilityDomain; } tCsrMobilityDomainInfo; #endif #ifdef FEATURE_WLAN_ESE typedef struct tagCsrEseCckmInfo { tANI_U32 reassoc_req_num; tANI_BOOLEAN krk_plumbed; tANI_U8 krk[CSR_KRK_KEY_LEN]; } tCsrEseCckmInfo; #endif #if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD) typedef struct tagCsrEseCckmIe { tANI_U8 cckmIe[DOT11F_IE_RSN_MAX_LEN]; tANI_U8 cckmIeLen; } tCsrEseCckmIe; #endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */ typedef struct tagCsrScanResultFilter { tCsrBSSIDs BSSIDs; //each bssid has a length of WNI_CFG_BSSID_LEN (6) tCsrSSIDs SSIDs; tCsrChannelInfo ChannelInfo; tCsrAuthList authType; tCsrEncryptionList EncryptionType; //eCSR_ENCRYPT_TYPE_ANY cannot be set in multicast encryption type. If caller doesn't case, //put all supported encryption types in here tCsrEncryptionList mcEncryptionType; eCsrRoamBssType BSSType; //this is a bit mask of all the needed phy mode defined in eCsrPhyMode tANI_U32 phyMode; //If countryCode[0] is not 0, countryCode is checked independent of fCheckUnknownCountryCode tANI_U8 countryCode[WNI_CFG_COUNTRY_CODE_LEN]; tANI_U8 uapsd_mask; /*For WPS filtering if true => auth and ecryption should be ignored*/ tANI_BOOLEAN bWPSAssociation; tANI_BOOLEAN bOSENAssociation; #if defined WLAN_FEATURE_VOWIFI /*For measurement reports --> if set, only SSID, BSSID and channel is considered for filtering.*/ tANI_BOOLEAN fMeasurement; #endif #ifdef WLAN_FEATURE_VOWIFI_11R tCsrMobilityDomainInfo MDID; #endif tANI_BOOLEAN p2pResult; #ifdef WLAN_FEATURE_11W // Management Frame Protection tANI_BOOLEAN MFPEnabled; tANI_U8 MFPRequired; tANI_U8 MFPCapable; #endif #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD tANI_BOOLEAN isPERRoamScan; #endif tCsrBssid bssid_hint; bool ignore_pmf_cap; }tCsrScanResultFilter; typedef struct sCsrChnPower_ { tANI_U8 firstChannel; tANI_U8 numChannels; tANI_U8 maxtxPower; }sCsrChnPower; typedef struct sCsrChannel_ { tANI_U8 numChannels; tANI_U8 channelList[WNI_CFG_VALID_CHANNEL_LIST_LEN]; }sCsrChannel; typedef struct tagCsr11dinfo { sCsrChannel Channels; tANI_U8 countryCode[WNI_CFG_COUNTRY_CODE_LEN+1]; //max power channel list sCsrChnPower ChnPower[WNI_CFG_VALID_CHANNEL_LIST_LEN]; }tCsr11dinfo; typedef enum { eCSR_ROAM_CANCELLED = 1, //this mean error happens before association_start or roaming_start is called. eCSR_ROAM_FAILED, //a CSR trigger roaming operation starts, callback may get a pointer to tCsrConnectedProfile eCSR_ROAM_ROAMING_START, //a CSR trigger roaming operation is completed eCSR_ROAM_ROAMING_COMPLETION, //Connection completed status. eCSR_ROAM_CONNECT_COMPLETION, //an association or start_IBSS operation starts, //callback may get a pointer to tCsrRoamProfile and a pointer to tSirBssDescription eCSR_ROAM_ASSOCIATION_START, //a roaming operation is finish, see eCsrRoamResult for //possible data passed back eCSR_ROAM_ASSOCIATION_COMPLETION, eCSR_ROAM_DISASSOCIATED, eCSR_ROAM_ASSOCIATION_FAILURE, //when callback with this flag. callback gets a pointer to the BSS desc. eCSR_ROAM_SHOULD_ROAM, //A new candidate for PMKID is found eCSR_ROAM_SCAN_FOUND_NEW_BSS, //CSR is done lostlink roaming and still cannot reconnect eCSR_ROAM_LOSTLINK, //a link lost is detected. CSR starts roaming. eCSR_ROAM_LOSTLINK_DETECTED, //TKIP MIC error detected, callback gets a pointer to tpSirSmeMicFailureInd eCSR_ROAM_MIC_ERROR_IND, eCSR_ROAM_IBSS_IND, //IBSS indications. //Update the connection status, useful for IBSS: new peer added, network is active etc. eCSR_ROAM_CONNECT_STATUS_UPDATE, eCSR_ROAM_GEN_INFO, eCSR_ROAM_SET_KEY_COMPLETE, eCSR_ROAM_REMOVE_KEY_COMPLETE, eCSR_ROAM_IBSS_LEAVE, //IBSS indications. //BSS in WDS mode status indication eCSR_ROAM_WDS_IND, //BSS in SoftAP mode status indication eCSR_ROAM_INFRA_IND, eCSR_ROAM_WPS_PBC_PROBE_REQ_IND, #ifdef WLAN_FEATURE_VOWIFI_11R eCSR_ROAM_FT_RESPONSE, #endif eCSR_ROAM_FT_START, eCSR_ROAM_REMAIN_CHAN_READY, eCSR_ROAM_SEND_ACTION_CNF, //this mean error happens before association_start or roaming_start is called. eCSR_ROAM_SESSION_OPENED, eCSR_ROAM_FT_REASSOC_FAILED, #ifdef FEATURE_WLAN_LFR eCSR_ROAM_PMK_NOTIFY, #endif #ifdef FEATURE_WLAN_LFR_METRICS eCSR_ROAM_PREAUTH_INIT_NOTIFY, eCSR_ROAM_PREAUTH_STATUS_SUCCESS, eCSR_ROAM_PREAUTH_STATUS_FAILURE, eCSR_ROAM_HANDOVER_SUCCESS, #endif #ifdef FEATURE_WLAN_TDLS eCSR_ROAM_TDLS_STATUS_UPDATE, eCSR_ROAM_RESULT_MGMT_TX_COMPLETE_IND, #endif eCSR_ROAM_DISCONNECT_ALL_P2P_CLIENTS, //Disaconnect all the clients eCSR_ROAM_SEND_P2P_STOP_BSS, //Stopbss triggered from SME due to different // beacon interval #ifdef WLAN_FEATURE_11W eCSR_ROAM_UNPROT_MGMT_FRAME_IND, #endif #ifdef WLAN_FEATURE_RMC eCSR_ROAM_IBSS_PEER_INFO_COMPLETE, #endif #ifdef WLAN_FEATURE_AP_HT40_24G eCSR_ROAM_2040_COEX_INFO_IND, #endif #if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD) eCSR_ROAM_TSM_IE_IND, eCSR_ROAM_CCKM_PREAUTH_NOTIFY, eCSR_ROAM_ESE_ADJ_AP_REPORT_IND, eCSR_ROAM_ESE_BCN_REPORT_IND, #endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */ eCSR_ROAM_UPDATE_MAX_RATE_IND, eCSR_ROAM_LOST_LINK_PARAMS_IND, eCSR_ROAM_UPDATE_SCAN_RESULT, eCSR_ROAM_ECSA_BCN_TX_IND, eCSR_ROAM_ECSA_CHAN_CHANGE_RSP, eCSR_ROAM_STA_CHANNEL_SWITCH, eCSR_ROAM_SAE_COMPUTE, }eRoamCmdStatus; //comment inside indicates what roaming callback gets typedef enum { eCSR_ROAM_RESULT_NONE, //this means no more action in CSR //If roamStatus is eCSR_ROAM_ASSOCIATION_COMPLETION, tCsrRoamInfo's pBssDesc may pass back eCSR_ROAM_RESULT_FAILURE, //Pass back pointer to tCsrRoamInfo eCSR_ROAM_RESULT_ASSOCIATED, eCSR_ROAM_RESULT_NOT_ASSOCIATED, eCSR_ROAM_RESULT_MIC_FAILURE, eCSR_ROAM_RESULT_FORCED, eCSR_ROAM_RESULT_DISASSOC_IND, eCSR_ROAM_RESULT_DEAUTH_IND, eCSR_ROAM_RESULT_CAP_CHANGED, //This means we starts an IBSS //tCsrRoamInfo's pBssDesc may pass back eCSR_ROAM_RESULT_IBSS_STARTED, //START_BSS failed //tCsrRoamInfo's pBssDesc may pass back eCSR_ROAM_RESULT_IBSS_START_FAILED, eCSR_ROAM_RESULT_IBSS_JOIN_SUCCESS, eCSR_ROAM_RESULT_IBSS_JOIN_FAILED, eCSR_ROAM_RESULT_IBSS_CONNECT, eCSR_ROAM_RESULT_IBSS_INACTIVE, //If roamStatus is eCSR_ROAM_ASSOCIATION_COMPLETION //tCsrRoamInfo's pBssDesc may pass back. and the peer's MAC address in peerMacOrBssid //If roamStatus is eCSR_ROAM_IBSS_IND, //the peer's MAC address in peerMacOrBssid and a beacon frame of the IBSS in pbFrames eCSR_ROAM_RESULT_IBSS_NEW_PEER, //Peer departed from IBSS, Callback may get a pointer tSmeIbssPeerInd in pIbssPeerInd eCSR_ROAM_RESULT_IBSS_PEER_DEPARTED, //Coalescing in the IBSS network (joined an IBSS network) //Callback pass a BSSID in peerMacOrBssid eCSR_ROAM_RESULT_IBSS_COALESCED, //If roamStatus is eCSR_ROAM_ROAMING_START, callback may get a pointer to tCsrConnectedProfile used to connect. eCSR_ROAM_RESULT_IBSS_STOP, eCSR_ROAM_RESULT_LOSTLINK, eCSR_ROAM_RESULT_MIC_ERROR_UNICAST, eCSR_ROAM_RESULT_MIC_ERROR_GROUP, eCSR_ROAM_RESULT_AUTHENTICATED, eCSR_ROAM_RESULT_NEW_RSN_BSS, #ifdef FEATURE_WLAN_WAPI eCSR_ROAM_RESULT_NEW_WAPI_BSS, #endif /* FEATURE_WLAN_WAPI */ // WDS started successfully eCSR_ROAM_RESULT_WDS_STARTED, // WDS start failed eCSR_ROAM_RESULT_WDS_START_FAILED, // WDS stopped eCSR_ROAM_RESULT_WDS_STOPPED, // WDS joined successfully in STA mode eCSR_ROAM_RESULT_WDS_ASSOCIATED, // A station joined WDS AP eCSR_ROAM_RESULT_WDS_ASSOCIATION_IND, // WDS join failed in STA mode eCSR_ROAM_RESULT_WDS_NOT_ASSOCIATED, // WDS disassociated eCSR_ROAM_RESULT_WDS_DISASSOCIATED, // INFRA started successfully eCSR_ROAM_RESULT_INFRA_STARTED, // INFRA start failed eCSR_ROAM_RESULT_INFRA_START_FAILED, // INFRA stopped eCSR_ROAM_RESULT_INFRA_STOPPED, // A station joining INFRA AP eCSR_ROAM_RESULT_INFRA_ASSOCIATION_IND, // A station joined INFRA AP eCSR_ROAM_RESULT_INFRA_ASSOCIATION_CNF, // INFRA disassociated eCSR_ROAM_RESULT_INFRA_DISASSOCIATED, eCSR_ROAM_RESULT_WPS_PBC_PROBE_REQ_IND, eCSR_ROAM_RESULT_SEND_ACTION_FAIL, // peer rejected assoc because max assoc limit reached. callback gets pointer to peer eCSR_ROAM_RESULT_MAX_ASSOC_EXCEEDED, //Assoc rejected due to concurrent session running on a different channel eCSR_ROAM_RESULT_ASSOC_FAIL_CON_CHANNEL, #ifdef FEATURE_WLAN_TDLS eCSR_ROAM_RESULT_ADD_TDLS_PEER, eCSR_ROAM_RESULT_UPDATE_TDLS_PEER, eCSR_ROAM_RESULT_DELETE_TDLS_PEER, eCSR_ROAM_RESULT_TEARDOWN_TDLS_PEER_IND, eCSR_ROAM_RESULT_DELETE_ALL_TDLS_PEER_IND, eCSR_ROAM_RESULT_LINK_ESTABLISH_REQ_RSP, eCSR_ROAM_RESULT_CHANNEL_SWITCH_REQ_RSP, #endif #ifdef WLAN_FEATURE_RMC eCSR_ROAM_RESULT_IBSS_PEER_INFO_SUCCESS, eCSR_ROAM_RESULT_IBSS_PEER_INFO_FAILED, #endif /* If Scan for SSID failed to found proper BSS */ eCSR_ROAM_RESULT_SCAN_FOR_SSID_FAILURE, }eCsrRoamResult; /*---------------------------------------------------------------------------- List of link quality indications HDD can receive from SME -----------------------------------------------------------------------------*/ typedef enum { eCSR_ROAM_LINK_QUAL_MIN_IND = -1, eCSR_ROAM_LINK_QUAL_POOR_IND = 0, /* bad link */ eCSR_ROAM_LINK_QUAL_GOOD_IND = 1, /* acceptable for voice */ eCSR_ROAM_LINK_QUAL_VERY_GOOD_IND = 2, /* suitable for voice */ eCSR_ROAM_LINK_QUAL_EXCELLENT_IND = 3, /* suitable for voice */ eCSR_ROAM_LINK_QUAL_MAX_IND /* invalid value */ } eCsrRoamLinkQualityInd; typedef enum { eCSR_DISCONNECT_REASON_UNSPECIFIED = 0, eCSR_DISCONNECT_REASON_MIC_ERROR, eCSR_DISCONNECT_REASON_DISASSOC, eCSR_DISCONNECT_REASON_DEAUTH, eCSR_DISCONNECT_REASON_HANDOFF, eCSR_DISCONNECT_REASON_IBSS_JOIN_FAILURE, eCSR_DISCONNECT_REASON_IBSS_LEAVE, }eCsrRoamDisconnectReason; typedef enum { // Not associated in Infra or participating in an IBSS / Ad-hoc network. eCSR_ASSOC_STATE_TYPE_NOT_CONNECTED, // Associated in an Infrastructure network. eCSR_ASSOC_STATE_TYPE_INFRA_ASSOCIATED, // Participating in an IBSS network though disconnected (no partner stations // in the IBSS). eCSR_ASSOC_STATE_TYPE_IBSS_DISCONNECTED, // Participating in an IBSS network with partner stations also present eCSR_ASSOC_STATE_TYPE_IBSS_CONNECTED, // Participating in a WDS network in AP or STA mode but not connected yet eCSR_ASSOC_STATE_TYPE_WDS_DISCONNECTED, // Participating in a WDS network and connected peer to peer eCSR_ASSOC_STATE_TYPE_WDS_CONNECTED, // Participating in a Infra network in AP not yet in connected state eCSR_ASSOC_STATE_TYPE_INFRA_DISCONNECTED, // Participating in a Infra network and connected to a peer eCSR_ASSOC_STATE_TYPE_INFRA_CONNECTED, }eCsrConnectState; // This parameter is no longer supported in the Profile. Need to set this in the global properties // for the adapter. typedef enum eCSR_MEDIUM_ACCESS { eCSR_MEDIUM_ACCESS_AUTO = 0, eCSR_MEDIUM_ACCESS_DCF, eCSR_MEDIUM_ACCESS_eDCF, eCSR_MEDIUM_ACCESS_HCF, eCSR_MEDIUM_ACCESS_WMM_eDCF_802dot1p, eCSR_MEDIUM_ACCESS_WMM_eDCF_DSCP, eCSR_MEDIUM_ACCESS_WMM_eDCF_NoClassify, eCSR_MEDIUM_ACCESS_11e_eDCF = eCSR_MEDIUM_ACCESS_eDCF, eCSR_MEDIUM_ACCESS_11e_HCF = eCSR_MEDIUM_ACCESS_HCF, }eCsrMediaAccessType; typedef enum { eCSR_TX_RATE_AUTO = 0, // use rate adaption to determine Tx rate. eCSR_TX_RATE_1Mbps = 0x00000001, eCSR_TX_RATE_2Mbps = 0x00000002, eCSR_TX_RATE_5_5Mbps = 0x00000004, eCSR_TX_RATE_6Mbps = 0x00000008, eCSR_TX_RATE_9Mbps = 0x00000010, eCSR_TX_RATE_11Mbps = 0x00000020, eCSR_TX_RATE_12Mbps = 0x00000040, eCSR_TX_RATE_18Mbps = 0x00000080, eCSR_TX_RATE_24Mbps = 0x00000100, eCSR_TX_RATE_36Mbps = 0x00000200, eCSR_TX_RATE_42Mbps = 0x00000400, eCSR_TX_RATE_48Mbps = 0x00000800, eCSR_TX_RATE_54Mbps = 0x00001000, eCSR_TX_RATE_72Mbps = 0x00002000, eCSR_TX_RATE_84Mbps = 0x00004000, eCSR_TX_RATE_96Mbps = 0x00008000, eCSR_TX_RATE_108Mbps = 0x00010000, eCSR_TX_RATE_126Mbps = 0x00020000, eCSR_TX_RATE_144Mbps = 0x00040000, eCSR_TX_RATE_168Mbps = 0x00080000, eCSR_TX_RATE_192Mbps = 0x00100000, eCSR_TX_RATE_216Mbps = 0x00200000, eCSR_TX_RATE_240Mbps = 0x00400000, }eCsrExposedTxRate; typedef enum { eCSR_OPERATING_CHANNEL_ALL = 0, eCSR_OPERATING_CHANNEL_AUTO = eCSR_OPERATING_CHANNEL_ALL, eCSR_OPERATING_CHANNEL_ANY = eCSR_OPERATING_CHANNEL_ALL, }eOperationChannel; typedef enum { eCSR_DOT11_FRAG_THRESH_AUTO = -1, eCSR_DOT11_FRAG_THRESH_MIN = 256, eCSR_DOT11_FRAG_THRESH_MAX = 2346, eCSR_DOT11_FRAG_THRESH_DEFAULT = 2000 }eCsrDot11FragThresh; //for channel bonding for ibss typedef enum { eCSR_CB_OFF = 0, eCSR_CB_AUTO = 1, eCSR_CB_DOWN = 2, eCSR_CB_UP = 3, }eCsrCBChoice; //For channel bonding, the channel number gap is 4, either up or down. For both 11a and 11g mode. #define CSR_CB_CHANNEL_GAP 4 #define CSR_CB_CENTER_CHANNEL_OFFSET 2 #define CSR_MAX_24GHz_CHANNEL_NUMBER ( SIR_11B_CHANNEL_END ) #define CSR_MIN_5GHz_CHANNEL_NUMBER ( SIR_11A_CHANNEL_BEGIN ) #define CSR_MAX_5GHz_CHANNEL_NUMBER ( SIR_11A_CHANNEL_END ) // WEP keysize (in bits)... typedef enum { eCSR_SECURITY_WEP_KEYSIZE_40 = 40, // 40 bit key + 24bit IV = 64bit WEP eCSR_SECURITY_WEP_KEYSIZE_104 = 104, // 104bit key + 24bit IV = 128bit WEP eCSR_SECURITY_WEP_KEYSIZE_MIN = eCSR_SECURITY_WEP_KEYSIZE_40, eCSR_SECURITY_WEP_KEYSIZE_MAX = eCSR_SECURITY_WEP_KEYSIZE_104, eCSR_SECURITY_WEP_KEYSIZE_MAX_BYTES = ( eCSR_SECURITY_WEP_KEYSIZE_MAX / 8 ), }eCsrWEPKeySize; // Possible values for the WEP static key ID... typedef enum { eCSR_SECURITY_WEP_STATIC_KEY_ID_MIN = 0, eCSR_SECURITY_WEP_STATIC_KEY_ID_MAX = 3, eCSR_SECURITY_WEP_STATIC_KEY_ID_DEFAULT = 0, eCSR_SECURITY_WEP_STATIC_KEY_ID_INVALID = -1, }eCsrWEPStaticKeyID; // Two extra key indicies are used for the IGTK (which is used by BIP) #define CSR_MAX_NUM_KEY (eCSR_SECURITY_WEP_STATIC_KEY_ID_MAX + 2 + 1) typedef enum { eCSR_SECURITY_SET_KEY_ACTION_NO_CHANGE, eCSR_SECURITY_SET_KEY_ACTION_SET_KEY, eCSR_SECURITY_SET_KEY_ACTION_DELETE_KEY, }eCsrSetKeyAction; typedef enum { eCSR_BAND_ALL, eCSR_BAND_24, eCSR_BAND_5G, eCSR_BAND_MAX, }eCsrBand; typedef enum { // Roaming because HDD requested for reassoc by changing one of the fields in // tCsrRoamModifyProfileFields. OR // Roaming because SME requested for reassoc by changing one of the fields in // tCsrRoamModifyProfileFields. eCsrRoamReasonStaCapabilityChanged, // Roaming because SME requested for reassoc to a different AP, as part of // inter AP handoff. eCsrRoamReasonBetterAP, // Roaming because SME requested it as the link is lost - placeholder, will // clean it up once handoff code gets in eCsrRoamReasonSmeIssuedForLostLink, }eCsrRoamReasonCodes; typedef enum { eCsrRoamWmmAuto = 0, eCsrRoamWmmQbssOnly = 1, eCsrRoamWmmNoQos = 2, } eCsrRoamWmmUserModeType; typedef enum { eCSR_REQUESTER_MIN = 0, eCSR_DIAG, eCSR_UMA_GAN, eCSR_HDD } eCsrStatsRequesterType; typedef enum { INIT = 0, REINIT, } driver_load_type; typedef struct tagPmkidCandidateInfo { tCsrBssid BSSID; tANI_BOOLEAN preAuthSupported; }tPmkidCandidateInfo; typedef struct tagPmkidCacheInfo { tCsrBssid BSSID; tANI_U8 PMKID[CSR_RSN_PMKID_SIZE]; uint8_t pmk[CSR_RSN_MAX_PMK_LEN]; uint8_t pmk_len; uint8_t ssid_len; uint8_t ssid[SIR_MAC_MAX_SSID_LENGTH]; uint8_t cache_id[CACHE_ID_LEN]; }tPmkidCacheInfo; #ifdef FEATURE_WLAN_WAPI typedef struct tagBkidCandidateInfo { tCsrBssid BSSID; tANI_BOOLEAN preAuthSupported; }tBkidCandidateInfo; typedef struct tagBkidCacheInfo { tCsrBssid BSSID; tANI_U8 BKID[CSR_WAPI_BKID_SIZE]; }tBkidCacheInfo; #endif /* FEATURE_WLAN_WAPI */ typedef struct tagCsrKeys { tANI_U8 KeyLength[ CSR_MAX_NUM_KEY ]; //Also use to indicate whether the key index is set tANI_U8 KeyMaterial[ CSR_MAX_NUM_KEY ][ CSR_MAX_KEY_LEN ]; tANI_U8 defaultIndex; }tCsrKeys; /* Following are fields which are part of tCsrRoamConnectedProfile might need modification dynamically once STA is up & running and this could trigger reassoc */ typedef struct tagCsrRoamModifyProfileFields { // during connect this specifies ACs U-APSD is to be setup // for (Bit0:VO; Bit1:VI; Bit2:BK; Bit3:BE all other bits are ignored). // During assoc response this COULD carry confirmation of what ACs U-APSD // got setup for. Later if an APP looking for APSD, SME-QoS might need to // modify this field tANI_U8 uapsd_mask; // HDD might ask to modify this field tANI_U16 listen_interval; }tCsrRoamModifyProfileFields; typedef struct tagCsrRoamProfile { //For eCSR_BSS_TYPE_WDS_AP. There must be one SSID in SSIDs. //For eCSR_BSS_TYPE_WDS_STA. There must be two SSIDs. Index 0 is the SSID of the WDS-AP //that we need to join. Index 1 is the SSID for self BSS. tCsrSSIDs SSIDs; tCsrBSSIDs BSSIDs; tANI_U32 phyMode; //this is a bit mask of all the needed phy mode defined in eCsrPhyMode eCsrRoamBssType BSSType; tCsrAuthList AuthType; eCsrAuthType negotiatedAuthType; tCsrAuthList akm_list; tCsrEncryptionList EncryptionType; //This field is for output only, not for input eCsrEncryptionType negotiatedUCEncryptionType; //eCSR_ENCRYPT_TYPE_ANY cannot be set in multicast encryption type. If caller doesn't case, //put all supported encryption types in here tCsrEncryptionList mcEncryptionType; //This field is for output only, not for input eCsrEncryptionType negotiatedMCEncryptionType; #ifdef WLAN_FEATURE_11W // Management Frame Protection tANI_BOOLEAN MFPEnabled; tANI_U8 MFPRequired; tANI_U8 MFPCapable; #endif tCsrKeys Keys; eCsrCBChoice CBMode; //up, down or auto tCsrChannelInfo ChannelInfo; tANI_U8 operationChannel; tANI_U16 beaconInterval; //If this is 0, SME will fill in for caller. // during connect this specifies ACs U-APSD is to be setup // for (Bit0:VO; Bit1:VI; Bit2:BK; Bit3:BE all other bits are ignored). // During assoc response this COULD carry confirmation of what ACs U-APSD got setup for tANI_U8 uapsd_mask; tANI_U32 nWPAReqIELength; //The byte count in the pWPAReqIE tANI_U8 *pWPAReqIE; //If not null, it has the IE byte stream for WPA tANI_U32 nRSNReqIELength; //The byte count in the pRSNReqIE tANI_U8 *pRSNReqIE; //If not null, it has the IE byte stream for RSN #ifdef FEATURE_WLAN_WAPI tANI_U32 nWAPIReqIELength; //The byte count in the pWAPIReqIE tANI_U8 *pWAPIReqIE; //If not null, it has the IE byte stream for WAPI #endif /* FEATURE_WLAN_WAPI */ //The byte count in the pAddIE for scan (at the time of join) tANI_U32 nAddIEScanLength; /* Additional IE information. * It has the IE byte stream for additional IE, * which can be WSC IE and/or P2P IE */ tANI_U8 addIEScan[SIR_MAC_MAX_ADD_IE_LENGTH+2]; //Additional IE information. tANI_U32 nAddIEAssocLength; //The byte count in the pAddIE for assoc tANI_U8 *pAddIEAssoc; //If not null, it has the IE byte stream for additional IE, which can be WSC IE and/or P2P IE tANI_U8 countryCode[WNI_CFG_COUNTRY_CODE_LEN]; //it is ignored if [0] is 0. /*WPS Association if true => auth and ecryption should be ignored*/ tANI_BOOLEAN bWPSAssociation; tANI_BOOLEAN bOSENAssociation; tANI_U32 nWSCReqIELength; //The byte count in the pWSCReqIE tANI_U8 *pWSCReqIE; //If not null, it has the IE byte stream for WSC tANI_U8 ieee80211d; tANI_U8 privacy; tANI_BOOLEAN fwdWPSPBCProbeReq; tAniAuthType csr80211AuthType; tANI_U32 dtimPeriod; tANI_BOOLEAN ApUapsdEnable; tANI_BOOLEAN protEnabled; tANI_BOOLEAN obssProtEnabled; tANI_U16 cfg_protection; tANI_U8 wps_state; #ifdef WLAN_FEATURE_VOWIFI_11R tCsrMobilityDomainInfo MDID; #endif tVOS_CON_MODE csrPersona; bool force_24ghz_in_ht20; tCsrBssid bssid_hint; bool force_rsne_override; bool require_h2e; }tCsrRoamProfile; typedef struct tagCsrRoamConnectedProfile { tSirMacSSid SSID; tANI_BOOLEAN handoffPermitted; tANI_BOOLEAN ssidHidden; tCsrBssid bssid; eCsrRoamBssType BSSType; eCsrAuthType AuthType; tCsrAuthList AuthInfo; tCsrAuthList akm_list; eCsrEncryptionType EncryptionType; tCsrEncryptionList EncryptionInfo; eCsrEncryptionType mcEncryptionType; tCsrEncryptionList mcEncryptionInfo; eCsrCBChoice CBMode; //up, down or auto tANI_U8 operationChannel; tANI_U16 beaconInterval; tCsrKeys Keys; // meaningless on connect. It's an OUT param from CSR's point of view // During assoc response carries the ACM bit-mask i.e. what // ACs have ACM=1 (if any), // (Bit0:VO; Bit1:VI; Bit2:BK; Bit3:BE all other bits are ignored) tANI_U8 acm_mask; tCsrRoamModifyProfileFields modifyProfileFields; tANI_U32 nAddIEAssocLength; //The byte count in the pAddIE for assoc tANI_U8 *pAddIEAssoc; //If not null, it has the IE byte stream for additional IE, which can be WSC IE and/or P2P IE tSirBssDescription *pBssDesc; tANI_BOOLEAN qap; //AP supports QoS tANI_BOOLEAN qosConnection; //A connection is QoS enabled #ifdef WLAN_FEATURE_VOWIFI_11R tCsrMobilityDomainInfo MDID; #endif #ifdef FEATURE_WLAN_ESE tCsrEseCckmInfo eseCckmInfo; tANI_BOOLEAN isESEAssoc; #endif tANI_U32 dot11Mode; #ifdef WLAN_FEATURE_11W /* Management Frame Protection */ tANI_BOOLEAN MFPEnabled; tANI_U8 MFPRequired; tANI_U8 MFPCapable; #endif }tCsrRoamConnectedProfile; #ifdef WLAN_FEATURE_VOWIFI_11R typedef struct tagCsr11rConfigParams { tANI_BOOLEAN IsFTResourceReqSupported; } tCsr11rConfigParams; #endif #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING typedef struct tagCsrNeighborRoamConfigParams { tANI_U32 nNeighborScanTimerPeriod; tANI_U8 nNeighborLookupRssiThreshold; tANI_U8 nNeighborReassocRssiThreshold; tANI_U16 nNeighborScanMinChanTime; tANI_U16 nNeighborScanMaxChanTime; sCsrChannel neighborScanChanList; tANI_U8 nMaxNeighborRetries; tANI_U16 nNeighborResultsRefreshPeriod; tANI_U16 nEmptyScanRefreshPeriod; tANI_U8 nNeighborInitialForcedRoamTo5GhEnable; tANI_U8 nWeakZoneRssiThresholdForRoam; }tCsrNeighborRoamConfigParams; #endif typedef struct tagCsrConfigParam { tANI_U32 FragmentationThreshold; tANI_U32 channelBondingMode24GHz; // keep this tANI_U32. This gets converted to ePhyChannelBondState tANI_U32 channelBondingMode5GHz; // in csrChangeDefaultConfigParam using convertCBIniValueToPhyCBState eCsrPhyMode phyMode; eCsrBand eBand; tANI_U32 RTSThreshold; tANI_U32 HeartbeatThresh50; tANI_U32 HeartbeatThresh24; eCsrCBChoice cbChoice; eCsrBand bandCapability; //indicate hw capability tANI_U32 bgScanInterval; tANI_U16 TxRate; eCsrRoamWmmUserModeType WMMSupportMode; tANI_BOOLEAN Is11eSupportEnabled; tANI_BOOLEAN Is11dSupportEnabled; tANI_BOOLEAN Is11dSupportEnabledOriginal; tANI_BOOLEAN Is11hSupportEnabled; tANI_BOOLEAN shortSlotTime; tANI_BOOLEAN ProprietaryRatesEnabled; tANI_U8 AdHocChannel24; tANI_U8 AdHocChannel5G; tANI_U32 impsSleepTime; //in units of seconds tANI_U32 nScanResultAgeCount; //this number minus one is the number of times a scan doesn't find it before it is removed tANI_U32 scanAgeTimeNCNPS; //scan result aging time threshold when Not-Connect-No-Power-Save, in seconds tANI_U32 scanAgeTimeNCPS; //scan result aging time threshold when Not-Connect-Power-Save, in seconds tANI_U32 scanAgeTimeCNPS; //scan result aging time threshold when Connect-No-Power-Save, in seconds, tANI_U32 scanAgeTimeCPS; //scan result aging time threshold when Connect-Power-Savein seconds tANI_U32 nRoamingTime; //In seconds, CSR will try this long before gives up. 0 means no roaming tANI_U8 bCatRssiOffset; //to set the RSSI difference for each category tANI_U8 fEnableMCCMode; //to set MCC Enable/Disable mode tANI_U8 fAllowMCCGODiffBI; //to allow MCC GO different B.I than STA's. NOTE: make sure if RIVA firmware can handle this combination before enabling this //at the moment, this flag is provided only to pass Wi-Fi Cert. 5.1.12 tCsr11dinfo Csr11dinfo; //Whether to limit the channels to the ones set in Csr11dInfo. If true, the opertaional //channels are limited to the default channel list. It is an "AND" operation between the //default channels and the channels in the 802.11d IE. tANI_BOOLEAN fEnforce11dChannels; //Country Code Priority //0 = 802.11D > Country IOCTL > NV //1 = Country IOCTL > 802.11D > NV tANI_BOOLEAN fSupplicantCountryCodeHasPriority; //When true, AP with unknown country code won't be see. //"Unknown country code" means either Ap doesn't have 11d IE or we cannot //find a domain for the country code in its 11d IE. tANI_BOOLEAN fEnforceCountryCodeMatch; //When true, only APs in the default domain can be seen. If the Ap has "unknown country //code", or the domain of the country code doesn't match the default domain, the Ap is //not acceptable. tANI_BOOLEAN fEnforceDefaultDomain; tANI_U16 vccRssiThreshold; tANI_U32 vccUlMacLossThreshold; tANI_U32 nPassiveMinChnTime; //in units of milliseconds tANI_U32 nPassiveMaxChnTime; //in units of milliseconds tANI_U32 nActiveMinChnTime; //in units of milliseconds tANI_U32 nActiveMaxChnTime; //in units of milliseconds tANI_U32 nInitialDwellTime; //in units of milliseconds uint32_t min_chntime_btc_esco; //in units of milliseconds uint32_t max_chntime_btc_esco; //in units of milliseconds uint32_t min_chntime_btc_sco; uint32_t max_chntime_btc_sco; tANI_U32 disableAggWithBtc; #ifdef WLAN_AP_STA_CONCURRENCY tANI_U32 nPassiveMinChnTimeConc; //in units of milliseconds tANI_U32 nPassiveMaxChnTimeConc; //in units of milliseconds tANI_U32 nActiveMinChnTimeConc; //in units of milliseconds tANI_U32 nActiveMaxChnTimeConc; //in units of milliseconds tANI_U32 nRestTimeConc; //in units of milliseconds tANI_U8 nNumStaChanCombinedConc; //number of channels combined for //STA in each split scan operation tANI_U8 nNumP2PChanCombinedConc; //number of channels combined for //P2P in each split scan operation #endif tANI_BOOLEAN IsIdleScanEnabled; //in dBm, the maximum TX power //The actual TX power is the lesser of this value and 11d. //If 11d is disable, the lesser of this and default setting. tANI_U8 nTxPowerCap; tANI_U32 statsReqPeriodicity; //stats request frequency from PE while in full power tANI_U32 statsReqPeriodicityInPS;//stats request frequency from PE while in power save #ifdef WLAN_FEATURE_VOWIFI_11R tCsr11rConfigParams csr11rConfig; #endif #ifdef FEATURE_WLAN_ESE tANI_U8 isEseIniFeatureEnabled; #endif #ifdef FEATURE_WLAN_LFR tANI_U8 isFastRoamIniFeatureEnabled; tANI_U8 MAWCEnabled; #endif #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) tANI_U8 isFastTransitionEnabled; tANI_U8 RoamRssiDiff; tANI_U8 nImmediateRoamRssiDiff; tANI_BOOLEAN isWESModeEnabled; #endif #ifdef WLAN_FEATURE_NEIGHBOR_ROAMING tCsrNeighborRoamConfigParams neighborRoamConfig; #endif /* Instead of Reassoc, send ADDTS/DELTS even when ACM is off for that AC * This is mandated by WMM-AC certification */ tANI_BOOLEAN addTSWhenACMIsOff; /*channelPowerInfoList24 has been seen corrupted. Set this flag to true trying to * detect when it happens. Adding this into code because we can't reproduce it easily. * We don't know when it happens. */ tANI_BOOLEAN fValidateList; /*Customer wants to start with an active scan based on the default country code. * This optimization will minimize the driver load to association time. * Based on this flag we will bypass the initial passive scan needed for 11d * to determine the country code & domain */ tANI_BOOLEAN fEnableBypass11d; /*Customer wants to optimize the scan time. Avoiding scans(passive) on DFS * channels while swipping through both bands can save some time * (apprx 1.3 sec) */ tANI_U8 fEnableDFSChnlScan; //To enable/disable scanning 2.4Ghz channels twice on a single scan request from HDD tANI_BOOLEAN fScanTwice; #ifdef WLAN_FEATURE_11AC tANI_U32 nVhtChannelWidth; tANI_U8 enableTxBF; tANI_U8 txBFCsnValue; tANI_BOOLEAN enableVhtFor24GHz; tANI_U8 enableMuBformee; #endif /* * To enable/disable scanning only 2.4Ghz channels on first scan */ tANI_BOOLEAN fFirstScanOnly2GChnl; #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) tANI_BOOLEAN nRoamPrefer5GHz; tANI_BOOLEAN nRoamIntraBand; tANI_U8 nProbes; tANI_U16 nRoamScanHomeAwayTime; #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD tANI_BOOLEAN isRoamOffloadScanEnabled; tANI_BOOLEAN bFastRoamInConIniFeatureEnabled; v_BOOL_t isPERRoamEnabled; v_BOOL_t isPERRoamCCAEnabled; v_S15_t PERRoamFullScanThreshold; v_S15_t PERMinRssiThresholdForRoam; v_U32_t rateUpThreshold; v_U32_t rateDownThreshold; v_U32_t waitPeriodForNextPERScan; v_U32_t PERtimerThreshold; v_U32_t PERroamTriggerPercent; #endif #ifdef WLAN_FEATURE_LFR_MBB tANI_BOOLEAN enable_lfr_mbb; #endif #endif tANI_BOOLEAN ignorePeerErpInfo; tANI_U8 scanCfgAgingTime; tANI_U8 enableTxLdpc; tANI_U8 isAmsduSupportInAMPDU; tANI_U8 nSelect5GHzMargin; tANI_U8 isCoalesingInIBSSAllowed; tANI_U8 allowDFSChannelRoam; tANI_BOOLEAN initialScanSkipDFSCh; tANI_BOOLEAN sendDeauthBeforeCon; eCsrBand scanBandPreference; #ifdef WLAN_FEATURE_AP_HT40_24G tANI_BOOLEAN apHT40_24GEnabled; tANI_U32 channelBondingAPMode24GHz; // Use for SAP/P2P GO 2.4GHz channel Bonding #endif tANI_U32 nOBSSScanWidthTriggerInterval; tANI_U8 roamDelayStatsEnabled; tANI_BOOLEAN ignorePeerHTopMode; tANI_BOOLEAN disableP2PMacSpoofing; tANI_BOOLEAN enableFatalEvent; tANI_U8 max_chan_for_dwell_time_cfg; uint32_t enable_edca_params; uint32_t edca_vo_cwmin; uint32_t edca_vi_cwmin; uint32_t edca_bk_cwmin; uint32_t edca_be_cwmin; uint32_t edca_vo_cwmax; uint32_t edca_vi_cwmax; uint32_t edca_bk_cwmax; uint32_t edca_be_cwmax; uint32_t edca_vo_aifs; uint32_t edca_vi_aifs; uint32_t edca_bk_aifs; uint32_t edca_be_aifs; tANI_BOOLEAN disable_scan_during_sco; uint32_t sta_auth_retries_for_code17; uint32_t sta_sap_scc_on_dfs_chan; tANI_U8 agg_btc_sco_oui[3]; tANI_U8 num_ba_buff_btc_sco; tANI_U8 num_ba_buff; bool force_scc_with_ecsa; bool isPeriodicRoamScanEnabled; bool require_h2e; }tCsrConfigParam; //Tush typedef struct tagCsrUpdateConfigParam { tCsr11dinfo Csr11dinfo; }tCsrUpdateConfigParam; typedef struct tagCsrRoamInfo { tCsrRoamProfile *pProfile; //may be NULL tSirBssDescription *pBssDesc; //May be NULL tANI_U32 nBeaconLength; //the length, in bytes, of the beacon frame, can be 0 tANI_U32 nAssocReqLength; //the length, in bytes, of the assoc req frame, can be 0 tANI_U32 nAssocRspLength; //The length, in bytes, of the assoc rsp frame, can be 0 tANI_U32 nFrameLength; tANI_U8 frameType; tANI_U8 *pbFrames; //Point to a buffer contain the beacon, assoc req, assoc rsp frame, in that order //user needs to use nBeaconLength, nAssocReqLength, nAssocRspLength to desice where //each frame starts and ends. tANI_BOOLEAN fReassocReq; //set to true if for re-association tANI_BOOLEAN fReassocRsp; //set to true if for re-association tCsrBssid bssid; //Only valid in IBSS //this is the peers MAC address for eCSR_ROAM_RESULT_IBSS_NEW_PEER or PEER_DEPARTED tCsrBssid peerMac; tSirResultCodes statusCode; tANI_U32 reasonCode; //this could be our own defined or sent from the other BSS(per 802.11 spec) tANI_U8 staId; // Peer stationId when connected /*The DPU signatures will be sent eventually to TL to help it determine the association to which a packet belongs to*/ /*Unicast DPU signature*/ tANI_U8 ucastSig; /*Broadcast DPU signature*/ tANI_U8 bcastSig; tANI_BOOLEAN fAuthRequired; //FALSE means auth needed from supplicant. TRUE means authenticated(static WEP, open) tANI_U8 sessionId; tANI_U8 rsnIELen; tANI_U8 *prsnIE; tANI_U8 addIELen; tANI_U8 *paddIE; union { tSirMicFailureInfo *pMICFailureInfo; tCsrRoamConnectedProfile *pConnectedProfile; tSirWPSPBCProbeReq *pWPSPBCProbeReq; tSirLostLinkParamsInfo *pLostLinkParams; } u; tANI_BOOLEAN wmmEnabledSta; //set to true if WMM enabled STA #ifdef WLAN_FEATURE_AP_HT40_24G tANI_BOOLEAN HT40MHzIntoEnabledSta; //set to true if 40 MHz Intolerant enabled STA #endif tANI_U32 dtimPeriod; #ifdef FEATURE_WLAN_ESE tANI_BOOLEAN isESEAssoc; #ifdef FEATURE_WLAN_ESE_UPLOAD tSirTsmIE tsmIe; tANI_U32 timestamp[2]; tANI_U16 tsmRoamDelay; tSirEseBcnReportRsp *pEseBcnReportRsp; #endif /* FEATURE_WLAN_ESE_UPLOAD */ #endif #ifdef WLAN_FEATURE_VOWIFI_11R tANI_BOOLEAN is11rAssoc; #endif void* pRemainCtx; tANI_U32 rxChan; #ifdef FEATURE_WLAN_TDLS tANI_U8 staType; #endif // Required for indicating the frames to upper layer tANI_U32 beaconLength; tANI_U8* beaconPtr; tANI_U32 assocReqLength; tANI_U8* assocReqPtr; tANI_S8 rxRssi; tANI_U32 maxRateFlags; #ifdef WLAN_FEATURE_AP_HT40_24G tpSirHT2040CoexInfoInd pSmeHT2040CoexInfoInd; #endif tDot11fIEHTCaps ht_caps; tDot11fIEVHTCaps vht_caps; tDot11fIEhs20vendor_ie hs20vendor_ie; tDot11fIEVHTOperation vht_operation; tDot11fIEHTInfo ht_operation; bool reassoc; struct sir_channel_chanege_rsp *ap_chan_change_rsp; tSirSmeChanInfo chan_info; tSirMacHTChannelWidth ch_width; #ifdef WLAN_FEATURE_SAE struct sir_sae_info *sae_info; #endif }tCsrRoamInfo; typedef struct tagCsrFreqScanInfo { tANI_U32 nStartFreq; //in unit of MHz tANI_U32 nEndFreq; //in unit of MHz tSirScanType scanType; }tCsrFreqScanInfo; typedef struct sSirSmeAssocIndToUpperLayerCnf { tANI_U16 messageType; // eWNI_SME_ASSOC_CNF tANI_U16 length; tANI_U8 sessionId; tSirResultCodes statusCode; tSirMacAddr bssId; // Self BSSID tSirMacAddr peerMacAddr; tANI_U16 aid; tSirMacAddr alternateBssId; tANI_U8 alternateChannelId; tANI_U8 wmmEnabledSta; //set to true if WMM enabled STA tSirRSNie rsnIE; // RSN IE received from peer tSirAddie addIE; // Additional IE received from peer, which can be WSC and/or P2P IE tANI_U8 reassocReq; //set to true if reassoc #ifdef WLAN_FEATURE_AP_HT40_24G tANI_U8 HT40MHzIntoEnabledSta; //set to true if 40 MHz Intolerant enabled STA #endif uint32_t rate_flags; tSirSmeChanInfo chan_info; tSirMacHTChannelWidth ch_width; tDot11fIEHTCaps HTCaps; tDot11fIEVHTCaps VHTCaps; uint32_t ies_len; uint8_t *ies; } tSirSmeAssocIndToUpperLayerCnf, *tpSirSmeAssocIndToUpperLayerCnf; typedef struct tagCsrSummaryStatsInfo { tANI_U32 retry_cnt[4]; tANI_U32 multiple_retry_cnt[4]; tANI_U32 tx_frm_cnt[4]; //tANI_U32 num_rx_frm_crc_err; same as rx_error_cnt //tANI_U32 num_rx_frm_crc_ok; same as rx_frm_cnt tANI_U32 rx_frm_cnt; tANI_U32 frm_dup_cnt; tANI_U32 fail_cnt[4]; tANI_U32 rts_fail_cnt; tANI_U32 ack_fail_cnt; tANI_U32 rts_succ_cnt; tANI_U32 rx_discard_cnt; tANI_U32 rx_error_cnt; tANI_U32 tx_byte_cnt; }tCsrSummaryStatsInfo; typedef struct tagCsrGlobalClassAStatsInfo { tANI_U32 rx_frag_cnt; tANI_U32 promiscuous_rx_frag_cnt; //tANI_U32 rx_fcs_err; tANI_U32 rx_input_sensitivity; tANI_U32 max_pwr; //tANI_U32 default_pwr; tANI_U32 sync_fail_cnt; tANI_U32 tx_rate; //mcs index for HT20 and HT40 rates tANI_U32 mcs_index; //to defferentiate between HT20 and HT40 rates;short and long guard interval tANI_U32 tx_rate_flags; }tCsrGlobalClassAStatsInfo; typedef struct tagCsrGlobalClassBStatsInfo { tANI_U32 uc_rx_wep_unencrypted_frm_cnt; tANI_U32 uc_rx_mic_fail_cnt; tANI_U32 uc_tkip_icv_err; tANI_U32 uc_aes_ccmp_format_err; tANI_U32 uc_aes_ccmp_replay_cnt; tANI_U32 uc_aes_ccmp_decrpt_err; tANI_U32 uc_wep_undecryptable_cnt; tANI_U32 uc_wep_icv_err; tANI_U32 uc_rx_decrypt_succ_cnt; tANI_U32 uc_rx_decrypt_fail_cnt; tANI_U32 mcbc_rx_wep_unencrypted_frm_cnt; tANI_U32 mcbc_rx_mic_fail_cnt; tANI_U32 mcbc_tkip_icv_err; tANI_U32 mcbc_aes_ccmp_format_err; tANI_U32 mcbc_aes_ccmp_replay_cnt; tANI_U32 mcbc_aes_ccmp_decrpt_err; tANI_U32 mcbc_wep_undecryptable_cnt; tANI_U32 mcbc_wep_icv_err; tANI_U32 mcbc_rx_decrypt_succ_cnt; tANI_U32 mcbc_rx_decrypt_fail_cnt; }tCsrGlobalClassBStatsInfo; typedef struct tagCsrGlobalClassCStatsInfo { tANI_U32 rx_amsdu_cnt; tANI_U32 rx_ampdu_cnt; tANI_U32 tx_20_frm_cnt; tANI_U32 rx_20_frm_cnt; tANI_U32 rx_mpdu_in_ampdu_cnt; tANI_U32 ampdu_delimiter_crc_err; }tCsrGlobalClassCStatsInfo; typedef struct tagCsrGlobalClassDStatsInfo { tANI_U32 tx_uc_frm_cnt; tANI_U32 tx_mc_frm_cnt; tANI_U32 tx_bc_frm_cnt; tANI_U32 rx_uc_frm_cnt; tANI_U32 rx_mc_frm_cnt; tANI_U32 rx_bc_frm_cnt; tANI_U32 tx_uc_byte_cnt[4]; tANI_U32 tx_mc_byte_cnt; tANI_U32 tx_bc_byte_cnt; tANI_U32 rx_uc_byte_cnt[4]; tANI_U32 rx_mc_byte_cnt; tANI_U32 rx_bc_byte_cnt; tANI_U32 rx_byte_cnt; tANI_U32 num_rx_bytes_crc_ok; tANI_U32 rx_rate; }tCsrGlobalClassDStatsInfo; typedef struct tagCsrPerStaStatsInfo { tANI_U32 tx_frag_cnt[4]; tANI_U32 tx_ampdu_cnt; tANI_U32 tx_mpdu_in_ampdu_cnt; } tCsrPerStaStatsInfo; typedef struct tagCsrRoamSetKey { eCsrEncryptionType encType; tAniKeyDirection keyDirection; //Tx, Rx or Tx-and-Rx tCsrBssid peerMac; //Peers MAC address. ALL 1's for group key tANI_U8 paeRole; //0 for supplicant tANI_U8 keyId; // Kye index tANI_U16 keyLength; //Number of bytes containing the key in pKey tANI_U8 Key[CSR_MAX_KEY_LEN]; tANI_U8 keyRsc[CSR_MAX_RSC_LEN]; } tCsrRoamSetKey; typedef struct tagCsrRoamRemoveKey { eCsrEncryptionType encType; tCsrBssid peerMac; //Peers MAC address. ALL 1's for group key tANI_U8 keyId; //key index } tCsrRoamRemoveKey; #ifdef FEATURE_WLAN_TDLS typedef struct tagCsrLinkEstablishParams { tSirMacAddr peerMac; tANI_U8 uapsdQueues; tANI_U8 qos; tANI_U8 maxSp; tANI_U8 isBufSta; tANI_U8 isOffChannelSupported; tANI_U8 isResponder; tANI_U8 supportedChannelsLen; tANI_U8 supportedChannels[SIR_MAC_MAX_SUPP_CHANNELS]; tANI_U8 supportedOperClassesLen; tANI_U8 supportedOperClasses[SIR_MAC_MAX_SUPP_OPER_CLASSES]; }tCsrTdlsLinkEstablishParams; typedef struct tagCsrTdlsSendMgmt { tSirMacAddr peerMac; tANI_U8 frameType; tANI_U8 dialog; tANI_U16 statusCode; tANI_U8 responder; tANI_U32 peerCapability; tANI_U8 *buf; tANI_U8 len; }tCsrTdlsSendMgmt; #endif typedef void * tScanResultHandle; #define CSR_INVALID_SCANRESULT_HANDLE (NULL) #ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD typedef struct tagCsrHandoffRequest { tCsrBssid bssid; tANI_U8 channel; /* To check if its a REASSOC or a FASTREASSOC IOCTL */ tANI_U8 src; }tCsrHandoffRequest; #endif typedef enum { REASSOC = 0, FASTREASSOC = 1, CONNECT_CMD_USERSPACE = 2, } handoff_src; #if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD) typedef struct tagCsrEseBeaconReqParams { tANI_U16 measurementToken; tANI_U8 channel; tANI_U8 scanMode; tANI_U16 measurementDuration; } tCsrEseBeaconReqParams, *tpCsrEseBeaconReqParams; typedef struct tagCsrEseBeaconReq { tANI_U8 numBcnReqIe; tCsrEseBeaconReqParams bcnReq[SIR_ESE_MAX_MEAS_IE_REQS]; } tCsrEseBeaconReq, *tpCsrEseBeaconReq; #endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */ struct tagCsrDelStaParams { tCsrBssid peerMacAddr; u16 reason_code; u8 subtype; }; /** * struct csr_set_tx_max_pwr_per_band - Req params to * set max tx power per band * @band: band for which power to be set * @power: power to set in dB */ struct csr_set_tx_max_pwr_per_band { eCsrBand band; tPowerdBm power; }; ////////////////////////////////////////////Common SCAN starts //void *p2 -- the second context pass in for the caller //***what if callback is called before requester gets the scanId?? typedef eHalStatus (*csrScanCompleteCallback)(tHalHandle, void *p2, tANI_U32 scanID, eCsrScanStatus status); ///////////////////////////////////////////Common Roam starts //pContext is the pContext passed in with the roam request //pParam is a pointer to a tCsrRoamInfo, see definition of eRoamCmdStatus and // eRoamCmdResult for detail valid members. It may be NULL //roamId is to identify the callback related roam request. 0 means unsolicit //roamStatus is a flag indicating the status of the callback //roamResult is the result typedef eHalStatus (*csrRoamCompleteCallback)(void *pContext, tCsrRoamInfo *pParam, tANI_U32 roamId, eRoamCmdStatus roamStatus, eCsrRoamResult roamResult); typedef eHalStatus (*csrRoamSessionCloseCallback)(void *pContext); /* --------------------------------------------------------------------------- \fn csrRoamGetNumPMKIDCache \brief return number of PMKID cache entries \return tANI_U32 - the number of PMKID cache entries -------------------------------------------------------------------------------*/ //tANI_U32 csrRoamGetNumPMKIDCache(tHalHandle hHal); /* --------------------------------------------------------------------------- \fn csrRoamGetPMKIDCache \brief return PMKID cache from CSR \param pNum - caller allocated memory that has the space of the number of pBuf tPmkidCacheInfo as input. Upon returned, *pNum has the needed or actually number in tPmkidCacheInfo. \param pPmkidCache - Caller allocated memory that contains PMKID cache, if any, upon return \return eHalStatus - when fail, it usually means the buffer allocated is not big enough -------------------------------------------------------------------------------*/ //eHalStatus csrRoamGetPMKIDCache(tHalHandle hHal, tANI_U32 *pNum, tPmkidCacheInfo *pPmkidCache); //pProfile - pointer to tCsrRoamProfile #define CSR_IS_START_IBSS(pProfile) (eCSR_BSS_TYPE_START_IBSS == (pProfile)->BSSType) #define CSR_IS_JOIN_TO_IBSS(pProfile) (eCSR_BSS_TYPE_IBSS == (pProfile)->BSSType) #define CSR_IS_IBSS(pProfile) ( CSR_IS_START_IBSS(pProfile) || CSR_IS_JOIN_TO_IBSS(pProfile) ) #define CSR_IS_INFRASTRUCTURE(pProfile) (eCSR_BSS_TYPE_INFRASTRUCTURE == (pProfile)->BSSType) #define CSR_IS_ANY_BSS_TYPE(pProfile) (eCSR_BSS_TYPE_ANY == (pProfile)->BSSType) #define CSR_IS_WDS_AP( pProfile ) ( eCSR_BSS_TYPE_WDS_AP == (pProfile)->BSSType ) #define CSR_IS_WDS_STA( pProfile ) ( eCSR_BSS_TYPE_WDS_STA == (pProfile)->BSSType ) #define CSR_IS_WDS( pProfile ) ( CSR_IS_WDS_AP( pProfile ) || CSR_IS_WDS_STA( pProfile ) ) #define CSR_IS_INFRA_AP( pProfile ) ( eCSR_BSS_TYPE_INFRA_AP == (pProfile)->BSSType ) //pProfile - pointer to tCsrRoamConnectedProfile #define CSR_IS_CONN_INFRA_AP( pProfile ) ( eCSR_BSS_TYPE_INFRA_AP == (pProfile)->BSSType ) #define CSR_IS_CONN_WDS_AP( pProfile ) ( eCSR_BSS_TYPE_WDS_AP == (pProfile)->BSSType ) #define CSR_IS_CONN_WDS_STA( pProfile ) ( eCSR_BSS_TYPE_WDS_STA == (pProfile)->BSSType ) #define CSR_IS_CONN_WDS( pProfile ) ( CSR_IS_WDS_AP( pProfile ) || CSR_IS_WDS_STA( pProfile ) ) ///////////////////////////////////////////Common Roam ends #ifdef WLAN_FEATURE_SAE #define CSR_IS_AUTH_TYPE_SAE(auth_type) \ (eCSR_AUTH_TYPE_SAE == auth_type) #else #define CSR_IS_AUTH_TYPE_SAE(auth_type) (false) #endif /* --------------------------------------------------------------------------- \fn csrSetChannels \brief HDD calls this function to change some global settings. caller must set the all fields or call csrGetConfigParam to prefill the fields. \param pParam - caller allocated memory \return eHalStatus -------------------------------------------------------------------------------*/ eHalStatus csrSetChannels(tHalHandle hHal, tCsrConfigParam *pParam ); eHalStatus csrSetRegInfo(tHalHandle hHal, tANI_U8 *apCntryCode); //enum to string conversion for debug output const char * get_eRoamCmdStatus_str(eRoamCmdStatus val); const char * get_eCsrRoamResult_str(eCsrRoamResult val); /* --------------------------------------------------------------------------- \fn csrSetPhyMode \brief HDD calls this function to set the phyMode. This function must be called after CFG is downloaded and all the band/mode setting already passed into CSR. \param phyMode - indicate the phyMode needs to set to. The value has to be either 0, or some bits set. See eCsrPhyMode for definition \param eBand - specify the operational band (2.4, 5 or both) \param pfRestartNeeded - pointer to a caller allocated space. Upon successful return, it indicates whether a restart is needed to apply the change \return eHalStatus -------------------------------------------------------------------------------*/ eHalStatus csrSetPhyMode(tHalHandle hHal, tANI_U32 phyMode, eCsrBand eBand, tANI_BOOLEAN *pfRestartNeeded); void csrDumpInit(tHalHandle hHal); /*--------------------------------------------------------------------------- This is the type for a link quality callback to be registered with SME for indications Once the link quality has been indicated, subsequently, link indications are posted each time there is a CHANGE in link quality. *** If there is no change in link, there will be no indication *** The indications may be based on one or more criteria internal to SME such as RSSI and PER. \param ind - Indication being posted \param pContext - any user data given at callback registration. \return None ---------------------------------------------------------------------------*/ typedef void (* csrRoamLinkQualityIndCallback) (eCsrRoamLinkQualityInd ind, void *pContext); /*--------------------------------------------------------------------------- This is the type for a statistics callback to be registered with SME for stats reporting Since the client requesting for the stats already know which class/type of stats it asked for, the callback will carry them in the rsp buffer (void * stats) whose size will be same as the size of requested stats & will be exactly in the same order requested in the stats mask from LSB to MSB \param stats - stats rsp buffer sent back with the report \param pContext - any user data given at callback registration. \return None ---------------------------------------------------------------------------*/ typedef void ( *tCsrStatsCallback) (void * stats, void *pContext); /*--------------------------------------------------------------------------- This is the type for a rssi callback to be registered with SME for getting rssi \param rssi - rssi \param pContext - any user data given at callback registration. \return None ---------------------------------------------------------------------------*/ typedef void ( *tCsrRssiCallback) (v_S7_t rssi, tANI_U32 staId, void *pContext); #if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD) /*--------------------------------------------------------------------------- This is the type for a tsm stats callback to be registered with SME for getting tsm stats \param tsmMetrics - tsmMetrics \param pContext - any user data given at callback registration. \return None ---------------------------------------------------------------------------*/ typedef void ( *tCsrTsmStatsCallback) (tAniTrafStrmMetrics tsmMetrics, tANI_U32 staId, void *pContext); #endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */ /*--------------------------------------------------------------------------- This is the type for a snr callback to be registered with SME for getting snr \param snr \param pContext - any user data given at callback registration. \return None ---------------------------------------------------------------------------*/ typedef void (*tCsrSnrCallback) (v_S7_t snr, tANI_U32 staId, void *pContext); /*--------------------------------------------------------------------------- This is the type for a get current antenna callback to be registered with SME for getting cuurently used antenna index \param antennaId to be filled by firmware. \param pContext - any user data given at callback registration. \return None ---------------------------------------------------------------------------*/ typedef void ( *tCsrAntennaIndexCallback) (int antennaId, void *pContext); #ifdef WLAN_FEATURE_VOWIFI_11R eHalStatus csrRoamIssueFTPreauthReq(tHalHandle hHal, tANI_U32 sessionId, tpSirBssDescription pBssDescription); #endif /*--------------------------------------------------------------------------- This is the function to change the Band configuraiton (ALL/2.4 GHZ/5 GHZ) \param hHal - handle to Hal context \param eBand - band value \return eHalStatus ---------------------------------------------------------------------------*/ eHalStatus csrSetBand(tHalHandle hHal, eCsrBand eBand); /*--------------------------------------------------------------------------- This is the function to get the current operating band value \param hHal - handl to Hal context \return eCsrband - band value ---------------------------------------------------------------------------*/ eCsrBand csrGetCurrentBand (tHalHandle hHal); /** * csrConvertCBIniValueToPhyCBState() - convert ini CB value to Phy CB val * @cb_ini_value: ini value of cb mode * * Return: phy CB val */ ePhyChanBondState csrConvertCBIniValueToPhyCBState(v_U32_t cb_ini_val); #endif