#ifndef QMI_WDS_SRVC_H #define QMI_WDS_SRVC_H /****************************************************************************** @file qmi_wds_srvc.h @brief QMI message library WDS service definitions DESCRIPTION This file contains common, external header file definitions for QMI interface library. INITIALIZATION AND SEQUENCING REQUIREMENTS qmi_wds_srvc_init_client() must be called to create one or more clients qmi_wds_srvc_release_client() must be called to delete each client when finished. $Header: //source/qcom/qct/modem/datacommon/qmimsglib/dev/work/inc/qmi_wds_srvc.h#5 $ $DateTime: 2009/07/15 10:38:12 $ --------------------------------------------------------------------------- Copyright (c) 2007 - 2014 Qualcomm Technologies, Inc. All Rights Reserved. Qualcomm Technologies Proprietary and Confidential. --------------------------------------------------------------------------- ******************************************************************************/ #include #include "qmi.h" #ifdef __cplusplus extern "C" { #endif #define QMI_WDS_MAX_PROFILE_STR_SIZE (32) #define QMI_WDS_MAX_APN_STR_SIZE (100 + 1) // Max APN size should be 100 // terminated by a NULL. #define QMI_WDS_MAX_APN_NAME_SIZE (150 + 1) #define QMI_WDS_MAX_USERNAME_PASS_STR_SIZE (127 + 1) #define QMI_WDS_MOBILE_IP_PROFILE_MAX_STR_SIZE (127 + 1) #define QMI_WDS_UMTS_QOS_SIZE 33 #define QMI_WDS_GPRS_QOS_SIZE 20 #define QMI_WDS_LTE_QOS_SIZE 17 #define QMI_WDS_MNC_SIZE 3 #define QMI_WDS_TFT_FILTER_SIZE 39 #define QMI_WDS_MIP_SERVICE_PROGRAMMING_CODE_SIZE 6 #define QMI_WDS_MAX_P_CSCF_IPV4_ADDRS 6 #define QMI_WDS_MAX_P_CSCF_IPV6_ADDRS 6 #define QMI_WDS_MAX_MCAST_ADDRS 25 #define QMI_WDS_MAX_MCAST_HNDLS 10 #define QMI_WDS_IPV6_ADDR_SIZE_IN_BYTES 16 #define QMI_WDS_IPV4_ADDR_SIZE_IN_BYTES 4 #define QMI_WDS_MAX_ERR_CODES_IN_RSP 10 // ? TODO : FIND OUT HOW MANY ? #define QMI_WDS_MAX_FQDN_STRINGS QMI_WDS_MAX_P_CSCF_IPV4_ADDRS #define QMI_WDS_MAX_DOMAIN_NAMES QMI_WDS_MAX_P_CSCF_IPV4_ADDRS #define QMI_WDS_MAX_APP_SPECIFIC_INFO_LEN (255) #define QMI_WDS_MAX_DATA_SYS_STATUS_NETWORK_INFO_LEN (16) #define QMI_WDS_MAX_LTE_ATTACH_PDN_LIST_SIZE (10) /************************************************************************ * Definitions associated with ip_addr type declarations ************************************************************************/ typedef uint32_t ipv4_addr_type; typedef unsigned char ipv6_addr_type[QMI_WDS_IPV6_ADDR_SIZE_IN_BYTES]; /*CE denotes CALL END*/ typedef enum { /* Call-end reason was not received, value undefined */ QMI_WDS_CE_REASON_UNDEFINED = -1, /* Technology-Agnostic Call End Reasons */ QMI_WDS_CE_REASON_UNSPECIFIED = 1, QMI_WDS_CE_REASON_CLIENT_END = 2, QMI_WDS_CE_REASON_NO_SRV = 3, QMI_WDS_CE_REASON_FADE = 4, QMI_WDS_CE_REASON_REL_NORMAL = 5, QMI_WDS_CE_REASON_ACC_IN_PROG = 6, QMI_WDS_CE_REASON_ACC_FAIL = 7, QMI_WDS_CE_REASON_REDIR_OR_HANDOFF = 8, QMI_WDS_CE_REASON_CLOSE_IN_PROGRESS = 9, QMI_WDS_CE_REASON_AUTH_FAILED = 10, QMI_WDS_CE_REASON_INTERNAL_CALL_END = 11, /* CDMA Call End Reasons */ QMI_WDS_CE_REASON_CDMA_LOCK = 500, QMI_WDS_CE_REASON_INTERCEPT = 501, QMI_WDS_CE_REASON_REORDER = 502, QMI_WDS_CE_REASON_REL_SO_REJ = 503, QMI_WDS_CE_REASON_INCOM_CALL = 504, QMI_WDS_CE_REASON_ALERT_STOP = 505, QMI_WDS_CE_REASON_ACTIVATION = 506, QMI_WDS_CE_REASON_MAX_ACCESS_PROBE = 507, QMI_WDS_CE_REASON_CCS_NOT_SUPPORTED_BY_BS = 508, QMI_WDS_CE_REASON_NO_RESPONSE_FROM_BS = 509, QMI_WDS_CE_REASON_REJECTED_BY_BS = 510, QMI_WDS_CE_REASON_INCOMPATIBLE = 511, QMI_WDS_CE_REASON_ALREADY_IN_TC = 512, QMI_WDS_CE_REASON_USER_CALL_ORIG_DURING_GPS = 513, QMI_WDS_CE_REASON_USER_CALL_ORIG_DURING_SMS = 514, QMI_WDS_CE_REASON_NO_CDMA_SRV = 515, /* WCDMA/GSM Call End Reasons */ QMI_WDS_CE_REASON_CONF_FAILED = 1000, QMI_WDS_CE_REASON_INCOM_REJ = 1001, QMI_WDS_CE_REASON_NO_GW_SRV = 1002, QMI_WDS_CE_REASON_NETWORK_END = 1003, QMI_WDS_CE_REASON_LLC_SNDCP_FAILURE = 1004, QMI_WDS_CE_REASON_INSUFFICIENT_RESOURCES = 1005, QMI_WDS_CE_REASON_OPTION_TEMP_OOO = 1006, QMI_WDS_CE_REASON_NSAPI_ALREADY_USED = 1007, QMI_WDS_CE_REASON_REGULAR_DEACTIVATION = 1008, QMI_WDS_CE_REASON_NETWORK_FAILURE = 1009, QMI_WDS_CE_REASON_UMTS_REATTACH_REQ = 1010, QMI_WDS_CE_REASON_PROTOCOL_ERROR = 1011, QMI_WDS_CE_REASON_OPERATOR_DETERMINED_BARRING = 1012, QMI_WDS_CE_REASON_UNKNOWN_APN = 1013, QMI_WDS_CE_REASON_UNKNOWN_PDP = 1014, QMI_WDS_CE_REASON_GGSN_REJECT = 1015, QMI_WDS_CE_REASON_ACTIVATION_REJECT = 1016, QMI_WDS_CE_REASON_OPTION_NOT_SUPPORTED = 1017, QMI_WDS_CE_REASON_OPTION_UNSUBSCRIBED = 1018, QMI_WDS_CE_REASON_QOS_NOT_ACCEPTED = 1019, QMI_WDS_CE_REASON_TFT_SEMANTIC_ERROR = 1020, QMI_WDS_CE_REASON_TFT_SYNTAX_ERROR = 1021, QMI_WDS_CE_REASON_UNKNOWN_PDP_CONTEXT = 1022, QMI_WDS_CE_REASON_FILTER_SEMANTIC_ERROR = 1023, QMI_WDS_CE_REASON_FILTER_SYNTAX_ERROR = 1024, QMI_WDS_CE_REASON_PDP_WITHOUT_ACTIVE_TFT = 1025, QMI_WDS_CE_REASON_INVALID_TRANSACTION_ID = 1026, QMI_WDS_CE_REASON_MESSAGE_INCORRECT_SEMANTIC = 1027, QMI_WDS_CE_REASON_INVALID_MANDATORY_INFO = 1028, QMI_WDS_CE_REASON_MESSAGE_TYPE_UNSUPPORTED = 1029, QMI_WDS_CE_REASON_MSG_TYPE_NONCOMPATIBLE_STATE = 1030, QMI_WDS_CE_REASON_UNKNOWN_INFO_ELEMENT = 1031, QMI_WDS_CE_REASON_CONDITIONAL_IE_ERROR = 1032, QMI_WDS_CE_REASON_MSG_AND_PROTOCOL_STATE_UNCOMPATIBLE = 1033, QMI_WDS_CE_REASON_APN_TYPE_CONFLICT = 1034, QMI_WDS_CE_REASON_NO_GPRS_CONTEXT = 1035, QMI_WDS_CE_REASON_FEATURE_NOT_SUPPORTED = 1036, QMI_WDS_CE_REASON_ILLEGAL_MS = 1037, QMI_WDS_CE_REASON_ILLEGAL_ME = 1038, QMI_WDS_CE_REASON_GPRS_SERVICES_AND_NON_GPRS_SERVICES_NOT_ALLOWED = 1039, QMI_WDS_CE_REASON_GPRS_SERVICES_NOT_ALLOWED = 1040, QMI_WDS_CE_REASON_MS_IDENTITY_CANNOT_BE_DERIVED_BY_THE_NETWORK = 1041, QMI_WDS_CE_REASON_IMPLICITLY_DETACHED = 1042, QMI_WDS_CE_REASON_PLMN_NOT_ALLOWED = 1043, QMI_WDS_CE_REASON_LA_NOT_ALLOWED = 1044, QMI_WDS_CE_REASON_GPRS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN = 1045, QMI_WDS_CE_REASON_PDP_DUPLICATE = 1046, QMI_WDS_CE_REASON_UE_RAT_CHANGE = 1047, /* 1xEV-DO Call End Reasons */ QMI_WDS_CE_REASON_CD_GEN_OR_BUSY = 1500, QMI_WDS_CE_REASON_CD_BILL_OR_AUTH = 1501, QMI_WDS_CE_REASON_CHG_HDR = 1502, QMI_WDS_CE_REASON_EXIT_HDR = 1503, QMI_WDS_CE_REASON_HDR_NO_SESSION = 1504, QMI_WDS_CE_REASON_HDR_ORIG_DURING_GPS_FIX = 1505, QMI_WDS_CE_REASON_HDR_CS_TIMEOUT = 1506, QMI_WDS_CE_REASON_HDR_RELEASED_BY_CM = 1507, QMI_WDS_CE_REASON_MAX /* DO NOT USE. Used for bounds check */ } qmi_wds_ce_reason_legacy_type; /* Profile ID technoloty type values */ typedef enum { QMI_WDS_PROFILE_TECH_TYPE_MIN = 0x00, QMI_WDS_PROFILE_TECH_3GPP = QMI_WDS_PROFILE_TECH_TYPE_MIN, QMI_WDS_PROFILE_TECH_3GPP2 = 0x01, QMI_WDS_PROFILE_TECH_EPC = 0x02, QMI_WDS_PROFILE_TECH_TYPE_MAX = QMI_WDS_PROFILE_TECH_EPC } qmi_wds_profile_tech_type; typedef enum { QMI_WDS_CE_TYPE_INVALID = 0XFF, QMI_WDS_CE_TYPE_MOBILE_IP = 0x01, QMI_WDS_CE_TYPE_INTERNAL = 0x02, QMI_WDS_CE_TYPE_CALL_MANAGER_DEFINED = 0x03, QMI_WDS_CE_TYPE_3GPP_SPEC_DEFINED = 0x06, QMI_WDS_CE_TYPE_PPP = 0x07, QMI_WDS_CE_TYPE_EHRPD = 0x08, QMI_WDS_CE_TYPE_IPV6 = 0x09 }qmi_wds_verbose_ce_reason_type; typedef enum { QMI_WDS_VERBOSE_CE_INVALID = -1, /*Mobile IP Call End reasons*/ QMI_WDS_VERBOSE_CE_MIP_FA_ERR_REASON_UNSPECIFIED = 64, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_ADMINISTRATIVELY_PROHIBITED = 65, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_INSUFFICIENT_RESOURCES = 66, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MOBILE_NODE_AUTHENTICATION_FAILURE = 67, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_HA_AUTHENTICATION_FAILURE = 68, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_REQUESTED_LIFETIME_TOO_LONG = 69, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MALFORMED_REQUEST = 70, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MALFORMED_REPLY = 71, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_ENCAPSULATION_UNAVAILABLE = 72, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_VJHC_UNAVAILABLE = 73, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_REVERSE_TUNNEL_UNAVAILABLE = 74, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_REVERSE_TUNNEL_IS_MANDATORY_AND_T_BIT_NOT_SET = 75, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_DELIVERY_STYLE_NOT_SUPPORTED = 79, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MISSING_NAI = 97, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MISSING_HA = 98, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MISSING_HOME_ADDR = 99, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_UNKNOWN_CHALLENGE = 104, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_MISSING_CHALLENGE = 105, QMI_WDS_VERBOSE_CE_MIP_FA_ERR_STALE_CHALLENGE = 106, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_REASON_UNSPECIFIED = 128, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_ADMINISTRATIVELY_PROHIBITED = 129, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_INSUFFICIENT_RESOURCES = 130, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_MOBILE_NODE_AUTHENTICATION_FAILURE = 131, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_FA_AUTHENTICATION_FAILURE = 132, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_REGISTRATION_ID_MISMATCH = 133, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_MALFORMED_REQUEST = 134, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_UNKNOWN_HA_ADDR = 136, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_REVERSE_TUNNEL_UNAVAILABLE = 137, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_REVERSE_TUNNEL_IS_MANDATORY_AND_T_BIT_NOT_SET = 138, QMI_WDS_VERBOSE_CE_MIP_HA_ERR_ENCAPSULATION_UNAVAILABLE = 139, QMI_WDS_VERBOSE_CE_MIP_ERR_REASON_UNKNOWN = 65535, /*Internal Error Call End reasons*/ QMI_WDS_VERBOSE_CE_INTERNAL_ERROR = 201, QMI_WDS_VERBOSE_CE_CALL_ENDED = 202, QMI_WDS_VERBOSE_CE_INTERNAL_UNKNOWN_CAUSE_CODE = 203, QMI_WDS_VERBOSE_CE_UNKNOWN_CAUSE_CODE = 204, QMI_WDS_VERBOSE_CE_CLOSE_IN_PROGRESS = 205, QMI_WDS_VERBOSE_CE_NW_INITIATED_TERMINATION = 206, QMI_WDS_VERBOSE_CE_APP_PREEMPTED = 207, QMI_WDS_VERBOSE_CE_ERR_PDN_IPV4_CALL_DISALLOWED = 208, QMI_WDS_VERBOSE_CE_ERR_PDN_IPV4_CALL_THROTTLED = 209, QMI_WDS_VERBOSE_CE_ERR_PDN_IPV6_CALL_DISALLOWED = 210, QMI_WDS_VERBOSE_CE_ERR_PDN_IPV6_CALL_THROTTLED = 211, QMI_WDS_VERBOSE_CE_UNPREFERRED_RAT = 214, QMI_WDS_VERBOSE_CE_APN_DISABLED = 220, QMI_WDS_VERBOSE_CE_MAX_V4_CONNECTIONS = 228, QMI_WDS_VERBOSE_CE_MAX_V6_CONNECTIONS = 229, QMI_WDS_VERBOSE_CE_APN_MISMATCH = 230, QMI_WDS_VERBOSE_CE_IP_VERSION_MISMATCH = 231, QMI_WDS_VERBOSE_CE_DUN_CALL_DISALLOWED = 232, QMI_WDS_VERBOSE_CE_INVALID_PROFILE = 233, QMI_WDS_VERBOSE_CE_INTERNAL_EPC_NONEPC_TRANSITION = 234, /*CM defined Call End reasons*/ QMI_WDS_VERBOSE_CE_CDMA_LOCK = 500, QMI_WDS_VERBOSE_CE_INTERCEPT = 501, QMI_WDS_VERBOSE_CE_REORDER = 502, QMI_WDS_VERBOSE_CE_REL_SO_REJ = 503, QMI_WDS_VERBOSE_CE_INCOM_CALL = 504, QMI_WDS_VERBOSE_CE_ALERT_STOP = 505, QMI_WDS_VERBOSE_CE_ACTIVATION = 506, QMI_WDS_VERBOSE_CE_MAX_ACCESS_PROBE = 507, QMI_WDS_VERBOSE_CE_CCS_NOT_SUPPORTED_BY_BS = 508, QMI_WDS_VERBOSE_CE_NO_RESPONSE_FROM_BS = 509, QMI_WDS_VERBOSE_CE_REJECTED_BY_BS = 510, QMI_WDS_VERBOSE_CE_INCOMPATIBLE = 511, QMI_WDS_VERBOSE_CE_ALREADY_IN_TC = 512, QMI_WDS_VERBOSE_CE_USER_CALL_ORIG_DURING_GPS = 513, QMI_WDS_VERBOSE_CE_USER_CALL_ORIG_DURING_SMS = 514, QMI_WDS_VERBOSE_CE_NO_CDMA_SRV = 515, QMI_WDS_VERBOSE_CE_CONF_FAILED = 1000, QMI_WDS_VERBOSE_CE_INCOM_REJ = 1001, QMI_WDS_VERBOSE_CE_NO_GW_SRV = 1002, QMI_WDS_VERBOSE_CE_NO_GPRS_CONTEXT = 1003, QMI_WDS_VERBOSE_CE_ILLEGAL_MS = 1004, QMI_WDS_VERBOSE_CE_ILLEGAL_ME = 1005, QMI_WDS_VERBOSE_CE_GPRS_SERVICES_AND_NON_GPRS_SERVICES_NOT_ALLOWED = 1006, QMI_WDS_VERBOSE_CE_GPRS_SERVICES_NOT_ALLOWED = 1007, QMI_WDS_VERBOSE_CE_MS_IDENTITY_CANNOT_BE_DERIVED_BY_THE_NETWORK = 1008, QMI_WDS_VERBOSE_CE_IMPLICITLY_DETACHED = 1009, QMI_WDS_VERBOSE_CE_PLMN_NOT_ALLOWED = 1010, QMI_WDS_VERBOSE_CE_LA_NOT_ALLOWED = 1011, QMI_WDS_VERBOSE_CE_GPRS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN = 1012, QMI_WDS_VERBOSE_CE_PDP_DUPLICATE = 1013, QMI_WDS_VERBOSE_CE_UE_RAT_CHANGE = 1014, QMI_WDS_VERBOSE_CE_CONGESTION = 1015, QMI_WDS_VERBOSE_CE_NO_PDP_CONTEXT_ACTIVATED = 1016, QMI_WDS_VERBOSE_CE_ACCESS_CLASS_DSAC_REJECTION = 1017, QMI_WDS_VERBOSE_CE_CD_GEN_OR_BUSY = 1500, QMI_WDS_VERBOSE_CE_CD_BILL_OR_AUTH = 1501, QMI_WDS_VERBOSE_CE_CHG_HDR = 1502, QMI_WDS_VERBOSE_CE_EXIT_HDR = 1503, QMI_WDS_VERBOSE_CE_HDR_NO_SESSION = 1504, QMI_WDS_VERBOSE_CE_HDR_ORIG_DURING_GPS_FIX = 1505, QMI_WDS_VERBOSE_CE_HDR_CS_TIMEOUT = 1506, QMI_WDS_VERBOSE_CE_HDR_RELEASED_BY_CM = 1507, QMI_WDS_VERBOSE_CE_CLIENT_END = 2000, QMI_WDS_VERBOSE_CE_NO_SRV = 2001, QMI_WDS_VERBOSE_CE_FADE = 2002, QMI_WDS_VERBOSE_CE_REL_NORMAL = 2003, QMI_WDS_VERBOSE_CE_ACC_IN_PROG = 2004, QMI_WDS_VERBOSE_CE_ACC_FAIL = 2005, QMI_WDS_VERBOSE_CE_REDIR_OR_HANDOFF = 2006, /*3GPP spec defined Call End reasons*/ QMI_WDS_VERBOSE_CE_OPERATOR_DETERMINED_BARRING = 8, QMI_WDS_VERBOSE_CE_LLC_SNDCP_FAILURE = 25, QMI_WDS_VERBOSE_CE_INSUFFICIENT_RESOURCES = 26, QMI_WDS_VERBOSE_CE_UNKNOWN_APN = 27, QMI_WDS_VERBOSE_CE_UNKNOWN_PDP = 28, QMI_WDS_VERBOSE_CE_AUTH_FAILED = 29, QMI_WDS_VERBOSE_CE_GGSN_REJECT = 30, QMI_WDS_VERBOSE_CE_ACTIVATION_REJECT = 31, QMI_WDS_VERBOSE_CE_OPTION_NOT_SUPPORTED = 32, QMI_WDS_VERBOSE_CE_OPTION_UNSUBSCRIBED = 33, QMI_WDS_VERBOSE_CE_OPTION_TEMP_OOO = 34, QMI_WDS_VERBOSE_CE_NSAPI_ALREADY_USED = 35, QMI_WDS_VERBOSE_CE_REGULAR_DEACTIVATION = 36, QMI_WDS_VERBOSE_CE_QOS_NOT_ACCEPTED = 37, QMI_WDS_VERBOSE_CE_NETWORK_FAILURE = 38, QMI_WDS_VERBOSE_CE_UMTS_REACTIVATION_REQ = 39, QMI_WDS_VERBOSE_CE_FEATURE_NOT_SUPPORTED = 40, QMI_WDS_VERBOSE_CE_TFT_SEMANTIC_ERROR = 41, QMI_WDS_VERBOSE_CE_TFT_SYNTAX_ERROR = 42, QMI_WDS_VERBOSE_CE_UNKNOWN_PDP_CONTEXT = 43, QMI_WDS_VERBOSE_CE_FILTER_SEMANTIC_ERROR = 44, QMI_WDS_VERBOSE_CE_FILTER_SYNTAX_ERROR = 45, QMI_WDS_VERBOSE_CE_PDP_WITHOUT_ACTIVE_TFT = 46, QMI_WDS_VERBOSE_CE_IP_V4_ONLY_ALLOWED = 50, QMI_WDS_VERBOSE_CE_IP_V6_ONLY_ALLOWED = 51, QMI_WDS_VERBOSE_CE_SINGLE_ADDR_BEARER_ONLY = 52, QMI_WDS_VERBOSE_CE_INVALID_TRANSACTION_ID = 81, QMI_WDS_VERBOSE_CE_MESSAGE_INCORRECT_SEMANTIC = 95, QMI_WDS_VERBOSE_CE_INVALID_MANDATORY_INFO = 96, QMI_WDS_VERBOSE_CE_MESSAGE_TYPE_UNSUPPORTED = 97, QMI_WDS_VERBOSE_CE_MSG_TYPE_NONCOMPATIBLE_STATE = 98, QMI_WDS_VERBOSE_CE_UNKNOWN_INFO_ELEMENT = 99, QMI_WDS_VERBOSE_CE_CONDITIONAL_IE_ERROR = 100, QMI_WDS_VERBOSE_CE_MSG_AND_PROTOCOL_STATE_UNCOMPATIBLE = 101, QMI_WDS_VERBOSE_CE_PROTOCOL_ERROR = 111, QMI_WDS_VERBOSE_CE_APN_TYPE_CONFLICT = 112, /*Enumeration for the PPP verbose call end reason*/ QMI_WDS_VERBOSE_CE_PPP_TIMEOUT = 1, QMI_WDS_VERBOSE_CE_PPP_AUTH_FAILURE = 2, QMI_WDS_VERBOSE_CE_PPP_OPTION_MISMATCH = 3, QMI_WDS_VERBOSE_CE_PPP_PAP_FAILURE = 31, QMI_WDS_VERBOSE_CE_PPP_CHAP_FAILURE = 32, QMI_WDS_VERBOSE_CE_PPP_UNKNOWN = -1, /* Enumeration for the EHRPD verbose call end reason */ QMI_WDS_VERBOSE_CE_EHRPD_SUBS_LIMITED_TO_V4 = 1, QMI_WDS_VERBOSE_CE_EHRPD_SUBS_LIMITED_TO_V6 = 2, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_TIMEOUT = 4, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_FAILURE = 5, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_GEN_ERROR = 6, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_UNAUTH_APN = 7, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_PDN_LIMIT_EXCEED = 8, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_NO_PDN_GW = 9, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_PDN_GW_UNREACH = 10, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_PDN_GW_REJ = 11, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_INSUFF_PARAM = 12, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_RESOURCE_UNAVAIL = 13, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_ADMIN_PROHIBIT = 14, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_PDN_ID_IN_USE = 15, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_SUBSCR_LIMITATION = 16, QMI_WDS_VERBOSE_CE_EHRPD_VSNCP_3GPP2I_PDN_EXISTS_FOR_THIS_APN = 17, /*IPV6 defined Call End reasons*/ QMI_WDS_VERBOSE_CE_PREFIX_UNAVAILABLE = 1, QMI_WDS_VERBOSE_CE_IPV6_ERR_HRPD_IPV6_DISABLED = 2, QMI_WDS_VERBOSE_CE_IPV6_DISABLED = 3 }qmi_wds_verbose_ce_reason_codes; typedef struct { qmi_wds_ce_reason_legacy_type legacy_reason; struct { qmi_wds_verbose_ce_reason_type verbose_reason_type; qmi_wds_verbose_ce_reason_codes verbose_reason; }call_end_reason_verbose; }qmi_wds_call_end_reason_type; /* Distinguishes asynchronous response message types */ typedef enum { QMI_WDS_SRVC_INVALID_ASYNC_RSP_MSG, QMI_WDS_SRVC_RESET_ASYNC_RSP_MSG, QMI_WDS_SRVC_START_NW_ASYNC_RSP_MSG, QMI_WDS_SRVC_STOP_NW_ASYNC_RSP_MSG, QMI_WDS_SRVC_ABORT_ASYNC_RSP_MSG, } qmi_wds_async_rsp_id_type; /* Packet service status indication definitions */ /* Indication message ID's */ #define QMI_WDS_EVENT_REPORT_IND_MSG_ID 0x0001 #define QMI_WDS_PKT_SRVC_STATUS_IND_MSG_ID 0x0022 #define QMI_WDS_INTERNAL_IFACE_EV_REGISTER_IND_MSG_ID 0xFFFE #define QMI_WDS_INTERNAL_MT_REQ_IND_MSG_ID 0xFFFA #define QMI_WDS_MCAST_STATUS_IND_MSG_ID 0x0033 #define QMI_WDS_MBMS_MCAST_CONTEXT_STATUS_IND_MSG_ID 0x003B #define QMI_WDS_DUN_CALL_INFO_IND_MSG_ID 0x0038 #define QMI_WDS_EMBMS_TMGI_ACTIVATE_IND_MSG_ID 0x0065 #define QMI_WDS_EMBMS_TMGI_DEACTIVATE_IND_MSG_ID 0x0066 #define QMI_WDS_EMBMS_TMGI_ACT_DEACT_IND_MSG_ID 0x0088 #define QMI_WDS_EMBMS_TMGI_LIST_IND_MSG_ID 0x0068 #define QMI_WDS_EMBMS_CONTENT_DESC_CONTROL_IND_MSG_ID 0x00B6 #define QMI_WDS_LTE_ATTACH_PDN_LIST_IND_MSG_ID 0x0095 #define QMI_WDS_REV_IP_TRANSPORT_IND_MSG_ID 0x008E #define QMI_WDS_EMBMS_SAI_LIST_IND_MSG_ID 0x00A1 #define QMI_WDS_HANDOFF_INFORMATION_IND_MSG_ID 0x009B #define QMI_WDS_EXT_IP_CONFIG_IND_MSG_ID 0x008C #define QMI_WDS_DATA_PATH_CHANGE_IND_MSG_ID 0x009E /* Placeholder for any data that might be returned by an asynchronous ** driver call. */ typedef union { struct { unsigned long pkt_data_handle; qmi_wds_call_end_reason_type call_end_reason; } start_nw_rsp; } qmi_wds_async_rsp_data_type; /* WDS service user async callback function prototype. The callback that is ** registered with any WDS service asynchronous function and will be called ** when the QMI reply is received */ typedef void (*qmi_wds_user_async_cb_type) ( int user_handle, qmi_service_id_type service_id, int sys_err_code, int qmi_err_code, void *user_data, qmi_wds_async_rsp_id_type rsp_id, qmi_wds_async_rsp_data_type *rsp_data ); /************************************************************************ * Definitions associated with qmi_wds_set_event_report() ************************************************************************/ #define QMI_WDS_EVENT_CHAN_RATE_IND 0x00000001 #define QMI_WDS_EVENT_XFER_STATS_IND 0x00000002 #define QMI_WDS_EVENT_BEARER_TECH_IND 0x00000004 #define QMI_WDS_EVENT_DORM_STATUS_IND 0x00000008 #define QMI_WDS_EVENT_DATA_CAPABILITIES_IND 0x00000010 #define QMI_WDS_EVENT_DATA_CALL_STATUS_CHG_IND 0x00000020 #define QMI_WDS_EVENT_PREF_DATA_SYS_IND 0x00000040 #define QMI_WDS_EVENT_DATA_CALL_TYPE_IND 0x00000080 #define QMI_WDS_EVENT_DATA_SYS_STATUS_IND 0x00000100 #define QMI_WDS_EVENT_LIMITED_DATA_SYS_STATUS_IND 0x00000200 #define QMI_WDS_EVENT_BEARER_TECH_EX_IND 0x00000400 #define QMI_WDS_XFER_STATS_TX_PKTS_GOOD 0x00000001 #define QMI_WDS_XFER_STATS_RX_PKTS_GOOD 0x00000002 #define QMI_WDS_XFER_STATS_TX_PKTS_ERR 0x00000004 #define QMI_WDS_XFER_STATS_RX_PKTS_ERR 0x00000008 #define QMI_WDS_XFER_STATS_TX_OVERFLOW 0x00000010 #define QMI_WDS_XFER_STATS_RX_OVERFLOW 0x00000020 #define QMI_WDS_XFER_STATS_TX_BYTES_OK 0x00000040 #define QMI_WDS_XFER_STATS_RX_BYTES_OK 0x00000080 #define QMI_WDS_XFER_STATS_TX_PACKETS_DROPPED 0x00000100 #define QMI_WDS_XFER_STATS_RX_PACKETS_DROPPED 0x00000200 #define QMI_WDS_XFER_STATS_ALL 0x000000FF typedef struct { /* Bitmask which indicates which of the below parameters has been set. One ** or more of QMI_WDS_EVENT_CHAN_RATE_IND, QMI_WDS_EVENT_XFER_STATS_IND, ** QMI_WDS_EVENT_BEARER_TECH_IND and QMI_WDS_EVENT_DORM_STATUS_IND */ unsigned long param_mask; /* If QMI_WDS_EVENT_CHAN_RATE_IND is set */ unsigned char report_chan_rate; /* TRUE to turn reporting on, FALSE is off */ /* If QMI_WDS_EVENT_XFER_STATS_IND is set */ struct { unsigned char period; /* report period in seconds, 0 turns off */ unsigned long mask; /* Mask of which statistics to report, one or more ** of QMI_WDS_XFER_STATS_TX_PKTS_GOOD, ** QMI_WDS_XFER_STATS_RX_PKTS_GOOD, etc. */ } report_xfer_stats; /* If QMI_WDS_EVENT_BEARER_TECH_IND is set */ unsigned char report_bearer_tech; /* TRUE to turn reporting on, FALSE is off */ /* if QMI_WDS_EVENT_BEARER_TECH_EX_IND is set */ unsigned char report_bearer_tech_ex; /* TRUE to turn reporting on, FALSE is off */ /* If QMI_WDS_EVENT_DORM_STATUS_IND is set */ unsigned char report_dorm_status; /* TRUE to turn reporting on, FALSE is off */ /* If QMI_WDS_EVENT_DATA_CAPABILITIES_IND is set */ unsigned char report_data_capabilities; /* If QMI_WDS_EVENT_DATA_CALL_STATUS_CHG_IND is set */ unsigned char report_data_call_status_chg; /* If QMI_WDS_EVENT_PREF_DATA_SYS_IND is set */ unsigned char report_pref_data_sys; /* If QMI_WDS_EVENT_DATA_SYS_STATUS_IND is set */ unsigned char report_data_sys_status; /* If QMI_WDS_EVENT_LIMITED_DATA_SYS_STATUS_IND is set */ unsigned char report_limited_data_sys_status; } qmi_wds_event_report_params_type; /************************************************************************ * Definitions associated with qmi_wds_get_pkt_stats() ************************************************************************/ typedef struct { /* Bitmask that indicates which of the following fields are valid. ** One or more of QMI_WDS_XFER_STATS_TX_PKTS_GOOD, ** QMI_WDS_XFER_STATS_RX_PKTS_GOOD, etc. */ unsigned long mask; unsigned long tx_good_pkt_cnt; unsigned long rx_good_pkt_cnt; unsigned long tx_err_pkt_cnt; unsigned long rx_err_pkt_cnt; unsigned long tx_overflow_cnt; unsigned long rx_overflow_cnt; uint64_t tx_good_byte_cnt; uint64_t rx_good_byte_cnt; unsigned long tx_pkts_dropped; unsigned long rx_pkts_dropped; } qmi_wds_xfer_stats; /************************************************************************ * Definitions associated with qmi_wds_internal_iface_event_register ************************************************************************/ /*Parame to be used only for Iface events registations request*/ #define QMI_WDS_IFACE_EVENT_REG_OUTAGE_NOTIFICATION 0x00000001 #define QMI_WDS_IFACE_EVENT_REG_EXTENDED_IP_CONFIG 0x00000002 #define QMI_WDS_IFACE_EVENT_REG_HDR_REV0_RATE_INERTIA_SUCCESS 0x00000004 #define QMI_WDS_IFACE_EVENT_REG_HDR_REV0_RATE_INERTIA_FAILURE 0x00000008 #define QMI_WDS_IFACE_EVENT_REG_HDR_SLOTTED_MODE_SUCCESS 0x00000010 #define QMI_WDS_IFACE_EVENT_REG_HDR_SLOTTED_MODE_FAILURE 0x00000020 #define QMI_WDS_IFACE_EVENT_REG_HDR_SLOTTED_SESSION_CHANGED 0x00000040 #define QMI_WDS_IFACE_EVENT_REG_RF_CONDITIONS 0x00000080 #define QMI_WDS_IFACE_EVENT_REG_DOS_ACK_EVENT 0x00000100 /* Above defines should be used to request different event indications*/ typedef unsigned long qmi_wds_iface_event_register_param_type ; /*Event indication related definitions*/ typedef enum { QMI_WDS_UNKNOWN_TYPE = 0x00, QMI_WDS_CDMA_TYPE = 0x01, QMI_WDS_UMTS_TYPE = 0x02 } qmi_wds_data_bearer_type; typedef enum { QMI_WDS_TECHNOLOGY_3GPP = 0x00000000, QMI_WDS_TECHNOLOGY_3GPP2 = 0x00000001, /* Force to 32 bits */ QMI_WDS_TECHNOLOGY_MAX = 0xFFFFFFFF }qmi_wds_data_bearer_type_ex; typedef enum { OUTAGE_NOTIFICATION = 0x0001, EXTENDED_IP_CONFIG = 0x0002, HDR_REV0_RATE_INERTIA_SUCCESS = 0x0003, HDR_REV0_RATE_INERTIA_FAILURE = 0x0004, HDR_REV0_SET_EIDLE_SLOTTED_MODE_SUCCESS = 0x0005, HDR_REV0_SET_EIDLE_SLOTTED_MODE_FAILURE = 0x0006, HDR_REV0_SLOTTED_MODE_SESSION_CHANGED = 0x0007, RF_CONDITIONS_CHANGED = 0x0008, DOS_ACK_INFORMATION = 0x0009 }qmi_wds_iface_event_name; typedef enum { FAIL = 0x000, SUCCESS = 0x001 }qmi_wds_extended_ip_config_status; typedef enum { FAIL_REQUEST_REJECTED = 0x00, FAIL_REQUEST_FAILED_TX = 0x01, FAIL_NOT_SUPPORTED = 0x02, FAIL_NO_NET = 0x03 }qmi_wds_hdr_related_failure_codes; typedef enum { INVALID = 0x00, BAD = 0x01, GOOD = 0x02, DONT_CARE = 0x03 }qmi_wds_rf_conditions; typedef enum { CDMA_DONT_CARE = 0x00, CDMA_1X = 0x01, CDMA_EVDO_REV0 = 0x02, CDMA_EVDO_REVA = 0x04, CDMA_EVDO_REVB = 0x08, CDMA_EHRPD = 0x10, CDMA_FMC = 0x20, CDMA_NULL_BEARER = 0x8000 }qmi_wds_cdma_rat_mask; typedef enum { UMTS_DONT_CARE = 0x0000, UMTS_WCDMA = 0x0001, UMTS_GPRS = 0x0002, UMTS_HSDPA = 0x0004, UMTS_HSUPA = 0x0008, UMTS_EDGE = 0x0010, UMTS_LTE = 0x0020, UMTS_HSDPA_PLUS = 0x0040, UMTS_DC_HSDPA_PLUS = 0x0080, UMTS_64_QAM = 0x0100, UMTS_TDSCDMA = 0x0200, UMTS_NULL_BEARER = 0x8000 }qmi_wds_umts_rat_mask; typedef union { qmi_wds_cdma_rat_mask cdma_rat_mask; qmi_wds_umts_rat_mask umts_rat_mask; }qmi_wds_db_rat_mask; typedef enum { QMI_WDS_BEARER_TECH_RAT_EX_NULL_BEARER = 0x0, /* 3GPP RAT Values */ QMI_WDS_BEARER_TECH_RAT_EX_3GPP_WCDMA = 0x1, QMI_WDS_BEARER_TECH_RAT_EX_3GPP_GERAN = 0x2, QMI_WDS_BEARER_TECH_RAT_EX_3GPP_LTE = 0x3, QMI_WDS_BEARER_TECH_RAT_EX_3GPP_TDSCDMA = 0x4, QMI_WDS_BEARER_TECH_RAT_EX_3GPP_WLAN = 0x5, QMI_WDS_BEARER_TECH_RAT_EX_3GPP_MAX = 0x64, /* 3GPP2 RAT Values */ QMI_WDS_BEARER_TECH_RAT_EX_3GPP2_1X = 0x65, QMI_WDS_BEARER_TECH_RAT_EX_3GPP2_HRPD = 0x66, QMI_WDS_BEARER_TECH_RAT_EX_3GPP2_EHRPD = 0x67, QMI_WDS_BEARER_TECH_RAT_EX_3GPP2_WLAN = 0x68, QMI_WDS_BEARER_TECH_RAT_EX_3GPP2_MAX = 0xC8, /* Force to 32 bits */ QMI_WDS_BEARER_TECH_RAT_EX_MAX = 0xFFFFFFFF } qmi_wds_bearer_tech_rat_mask_ex; typedef enum { QMI_WDS_SO_MASK_UNSPECIFIED = 0x0000000000000000, // SO Mask Unspecified, commented until QMI IDL compiler supports it QMI_WDS_3GPP_SO_MASK_WCDMA = 0x0000000000000001, QMI_WDS_3GPP_SO_MASK_HSDPA = 0x0000000000000002, QMI_WDS_3GPP_SO_MASK_HSUPA = 0x0000000000000004, QMI_WDS_3GPP_SO_MASK_HSDPAPLUS = 0x0000000000000008, QMI_WDS_3GPP_SO_MASK_DC_HSDPAPLUS = 0x0000000000000010, QMI_WDS_3GPP_SO_MASK_64_QAM = 0x0000000000000020, QMI_WDS_3GPP_SO_MASK_HSPA = 0x0000000000000040, QMI_WDS_3GPP_SO_MASK_GPRS = 0x0000000000000080, QMI_WDS_3GPP_SO_MASK_EDGE = 0x0000000000000100, QMI_WDS_3GPP_SO_MASK_GSM = 0x0000000000000200, QMI_WDS_3GPP_SO_MASK_S2B = 0x0000000000000400, QMI_WDS_3GPP2_SO_MASK_1X_IS95 = 0x0000000001000000, QMI_WDS_3GPP2_SO_MASK_1X_IS2000 = 0x0000000002000000, QMI_WDS_3GPP2_SO_MASK_1X_IS2000_REL_A = 0x0000000004000000, QMI_WDS_3GPP2_SO_MASK_HDR_REV0_DPA = 0x0000000008000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVA_DPA = 0x0000000010000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVB_DPA = 0x0000000020000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVA_MPA = 0x0000000040000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVB_MPA = 0x0000000080000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVA_EMPA = 0x0000000100000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVB_EMPA = 0x0000000200000000, QMI_WDS_3GPP2_SO_MASK_HDR_REVB_MMPA = 0x0000000400000000, QMI_WDS_3GPP2_SO_MASK_HDR_EVDO_FMC = 0x0000000800000000, /* Force to 64 bits */ QMI_WDS_3GPP2_SO_MASK_MAX = 0xFFFFFFFFFFFFFFFF } qmi_wds_bearer_tech_so_mask_ex; typedef enum { CDMA_1X_DONT_CARE = 0x00, CDMA_1X_IS95 = 0x01, CDMA_1X_IS2000 = 0x02, CDMA_1X_IS2000_REL_A = 0x04 }qmi_wds_cdma_1x_db_so_mask; typedef enum { CDMA_EVDO_REV0_DONT_CARE = 0x00, CDMA_EVDO_REV0_DPA = 0x01, }qmi_wds_cdma_evdo_rev0_db_so_mask; typedef enum { CDMA_EVDO_DONT_CARE = 0x00, CDMA_EVDO_REVA_DONT_CARE = CDMA_EVDO_DONT_CARE, CDMA_EVDO_REVA_DPA = 0x01, CDMA_EVDO_REVA_MFPA = 0x02, CDMA_EVDO_REVA_EMPA = 0x04, CDMA_EVDO_REVA_EMPA_EHRPD = 0x08, }qmi_wds_cdma_evdo_reva_db_so_mask; /* Required for legacy uses */ typedef qmi_wds_cdma_evdo_reva_db_so_mask qmi_wds_cdma_evdo_db_so_mask; typedef enum { CDMA_EVDO_REVB_DONT_CARE = 0x00, CDMA_EVDO_REVB_DPA = 0x01, CDMA_EVDO_REVB_MFPA = 0x02, CDMA_EVDO_REVB_EMPA = 0x04, CDMA_EVDO_REVB_EMPA_EHRPD = 0x08, CDMA_EVDO_REVB_MMPA = 0x10, CDMA_EVDO_REVB_MMPA_EHRPD = 0x20 }qmi_wds_cdma_evdo_revb_db_so_mask; typedef union { int so_mask_value; qmi_wds_cdma_1x_db_so_mask so_mask_1x; qmi_wds_cdma_evdo_rev0_db_so_mask so_mask_evdo_rev0; qmi_wds_cdma_evdo_db_so_mask so_mask_evdo; qmi_wds_cdma_evdo_reva_db_so_mask so_mask_evdo_reva; qmi_wds_cdma_evdo_revb_db_so_mask so_mask_evdo_revb; }qmi_wds_db_so_mask; typedef enum { NAS_SIGNALLING_USED = 0, DHCP_USED = 1 }qmi_wds_addr_alloc_pref; typedef struct { unsigned char qci; unsigned long g_dl_bit_rate; unsigned long max_dl_bit_rate; unsigned long g_ul_bit_rate; unsigned long max_ul_bit_rate; }qmi_wds_lte_qos_params_type; typedef enum { WDS_IP_SUPPORT_TYPE_IPV4 = 0x00, /**< IPv4 \n */ WDS_IP_SUPPORT_TYPE_IPV6 = 0x01, /**< IPv6 \n */ WDS_IP_SUPPORT_TYPE_IPV4V6 = 0x02, /**< IPv4v6 */ }wds_ip_support_type_enum; typedef struct { /* Optional */ /* APN String */ uint8_t apn_string_valid; /**< Must be set to true if apn_string is being passed */ char apn_string[QMI_WDS_MAX_APN_NAME_SIZE]; /**< String representing the APN. Maximum length is 150 bytes. */ /* Optional */ /* IP Support Type */ uint8_t ip_type_valid; /**< Must be set to true if ip_type is being passed */ wds_ip_support_type_enum ip_type; /**< Values: \n - 0 -- IPv4 \n - 1 -- IPv6 \n - 2 -- IPv4v6 */ /* Optional */ /* Over the Air Attach Performed */ uint8_t ota_attach_performed_valid; /**< Must be set to true if ota_attach_performed is being passed */ uint8_t ota_attach_performed; /**< Values: \n - 0 -- Over-the-air attach not performed \n - 1 -- Over-the-air attach performed */ }qmi_wds_lte_attach_params; #define QMI_WDS_APN_BEARER_MASK_GSM 0x0000000000000001 #define QMI_WDS_APN_BEARER_MASK_WCDMA 0x0000000000000002 #define QMI_WDS_APN_BEARER_MASK_LTE 0x0000000000000004 #define QMI_WDS_APN_BEARER_MASK_ANY 0x8000000000000000 /*Masks for the optional TLVs*/ #define QMI_WDS_OUTAGE_INFO_PARAM_TYPE 0x00000001 #define QMI_WDS_XTENDED_IP_CONFIG_PARAM_TYPE 0x00000002 #define QMI_WDS_HDR_REV0_INTERTIA_FAILURE_PARAM_TYPE 0x00000004 #define QMI_WDS_HDR_SET_EIDLE_SLOT_MODE_FAIL_PARAM_TYPE 0x00000008 #define QMI_WDS_HDR_SET_EIDLE_SLOT_MODE_SESSION_CHANGED_PARAM_TYPE 0x00000010 #define QMI_WDS_RF_CONDITIONS_PARAM_TYPE 0x00000020 #define QMI_WDS_DOS_ACK_INFO_PARAM_TYPE 0x00000040 typedef struct { unsigned long param_mask; qmi_wds_iface_event_name iface_event_name; struct { unsigned long time_to_outage; unsigned long duration; }outage_information; qmi_wds_extended_ip_config_status extended_ip_config_status; qmi_wds_hdr_related_failure_codes hdr_rev0_rate_inertia_failure_status; qmi_wds_hdr_related_failure_codes hdr_set_eidle_slottedmode_failure_status; unsigned char hdr_set_eidle_slot_cycle_changed; struct { qmi_wds_data_bearer_type current_db_nw; qmi_wds_db_rat_mask rat_mask; qmi_wds_db_so_mask db_so_mask; qmi_wds_rf_conditions rf_conditions; }rf_conditions; struct { int handle; unsigned long overflow; unsigned long dos_ack_status; }dos_ack_information; }qmi_wds_internal_iface_event_ind_data_type; /************************************************************************ * Definitions associated with qmi_wds_bind_mux_data_port() ************************************************************************/ typedef enum { QMI_WDS_PER_EP_TYPE_MIN = 0x00, QMI_WDS_PER_EP_TYPE_RESERVED = 0x00, QMI_WDS_PER_EP_TYPE_HSIC = 0x01, QMI_WDS_PER_EP_TYPE_HSUSB = 0x02, QMI_WDS_PER_EP_TYPE_PCIE = 0x03, QMI_WDS_PER_EP_TYPE_EMBEDDED = 0x04, QMI_WDS_PER_EP_TYPE_BAM_DMUX = 0x05, QMI_WDS_PER_EP_TYPE_MAX, QMI_WDS_PER_EP_TYPE_FORCE_32_BIT = 0x7FFFFFFF } qmi_wds_per_ep_type; /** Structure for specifying EP ID information */ typedef struct { qmi_wds_per_ep_type ep_type; /** Peripheral end point type */ unsigned long iface_id; /** Data end-point ID */ } qmi_wds_per_ep_id_type; #define QMI_WDS_BIND_MUX_DATA_PORT_PARAMS_EP_ID 0x00000001 #define QMI_WDS_BIND_MUX_DATA_PORT_PARAMS_MUX_ID 0x00000002 #define QMI_WDS_BIND_MUX_DATA_PORT_PARAMS_REVERSED 0x00000004 /** Parameter structure for binding WDS client to a mux data port */ typedef struct { unsigned long params_mask; /** Params mask */ qmi_wds_per_ep_id_type ep_id; /** EP ID information */ unsigned char mux_id; /** Mux ID to bind to */ unsigned char reversed; /** Whether this is a reverse port */ } qmi_wds_bind_mux_data_port_params_type; /** Parameter structure for binding WDS client to a subscrption */ typedef enum { QMI_WDS_DEFAULT_SUBS = 0x0000, QMI_WDS_PRIMARY_SUBS = 0x0001, QMI_WDS_SECONDARY_SUBS = 0x0002, QMI_WDS_TERTIARY_SUBS = 0x0003, QMI_WDS_DONT_CARE_SUBS = 0x00FF } qmi_wds_bind_subscription_type; /************************************************************************ * Definitions associated with qmi_wds_start_nw_if() ************************************************************************/ /* Technology preference parameter */ #define QMI_WDS_TECH_PREF_UMTS 0x01 #define QMI_WDS_TECH_PREF_CDMA 0x02 #define QMI_WDS_TECH_PREF_DVBH 0x04 #define QMI_WDS_TECH_PREF_MBMS 0x08 #define QMI_WDS_TECH_PREF_BCMCS 0x10 #define QMI_WDS_TECH_PREF_SLIP 0x20 /* MAKE SURE TO UPDATE IF TECHNOLOGY PREFERENCES ARE ADDED !!! */ #define QMI_WDS_TECH_PREF_ALL ( QMI_WDS_TECH_PREF_UMTS | \ QMI_WDS_TECH_PREF_CDMA | \ QMI_WDS_TECH_PREF_DVBH | \ QMI_WDS_TECH_PREF_MBMS | \ QMI_WDS_TECH_PREF_BCMCS | \ QMI_WDS_TECH_PREF_SLIP ) #define QMI_WDS_START_NW_TECH_3GPP QMI_WDS_TECH_PREF_UMTS #define QMI_WDS_START_NW_TECH_3GPP2 QMI_WDS_TECH_PREF_CDMA #define QMI_WDS_START_NW_TECH_ALL_TECHS QMI_WDS_TECH_PREF_ALL /* Deprecated, use qmi_ip_family_pref_type directly */ #define qmi_wds_ip_family_pref_type qmi_ip_family_pref_type #define QMI_WDS_IP_FAMILY_PREF_ANY QMI_IP_FAMILY_PREF_ANY #define QMI_WDS_IP_FAMILY_PREF_IPV4 QMI_IP_FAMILY_PREF_IPV4 #define QMI_WDS_IP_FAMILY_PREF_IPV6 QMI_IP_FAMILY_PREF_IPV6 #define QMI_WDS_IP_FAMILY_PREF_UNSPECIFIED QMI_IP_FAMILY_PREF_UNSPECIFIED typedef enum { QMI_WDS_DATA_CALL_ORIGIN_LAPTOP = 0x00, QMI_WDS_DATA_CALL_ORIGIN_EMBEDDED = 0x01 }qmi_wds_data_call_origin_type; /* Parameter indication bits */ #define QMI_WDS_START_NW_TECH_PREF_PARAM 0x00000001 #define QMI_WDS_START_NW_PROFILE_IDX_PARAM 0x00000002 #define QMI_WDS_START_NW_APN_NAME_PARAM 0x00000004 #define QMI_WDS_START_NW_IP_FAMILY_PREF_PARAM 0x00000008 #define QMI_WDS_START_NW_PRIM_DNS_IPV4_ADDR_PREF_PARAM 0x00000010 #define QMI_WDS_START_NW_SECONDRY_DNS_IPV4_ADDR_PREF_PARAM 0x00000020 #define QMI_WDS_START_NW_PRIMARY_NBNS_ADDR_PREF_PARAM 0x00000040 #define QMI_WDS_START_NW_SECONDARY_NBNS_ADDR_PREF_PARAM 0x00000080 #define QMI_WDS_START_NW_IPV4_ADDR_PREF_PARAM 0x00000100 #define QMI_WDS_START_NW_USERNAME_PARAM 0x00000200 #define QMI_WDS_START_NW_PASSWORD_PARAM 0x00000400 #define QMI_WDS_START_NW_AUTH_PREF_PARAM 0x00000800 #define QMI_WDS_START_NW_IFACE_HNDL_PARAM 0x00001000 #define QMI_WDS_START_NW_PROFILE_IDX_3GPP2_PARAM 0x00002000 #define QMI_WDS_START_NW_XTENDED_TECH_PREF_PARAM 0x00004000 #define QMI_WDS_START_NW_DATA_CALL_ORIGIN_PARAM 0x00008000 #define QMI_WDS_START_NW_HANDOFF_CONTEXT_PARAM 0x00010000 /* Authentication option values */ typedef enum { QMI_WDS_AUTH_PREF_PAP_CHAP_NOT_ALLOWED = 0x00, QMI_WDS_AUTH_PREF_PAP_ONLY_ALLOWED = 0x01, QMI_WDS_AUTH_PREF_CHAP_ONLY_ALLOWED = 0x02, QMI_WDS_AUTH_PREF_PAP_CHAP_BOTH_ALLOWED = 0x03 } qmi_wds_auth_pref_type; typedef enum { INTERFACE_LOOKUP = 1, DATAPATH_LOOKUP = 2 }qmi_wds_route_lookup_type; /* this maps with ps iface name */ typedef enum { QMI_WDS_IFACE_NAME_CDMA = 0x8001, QMI_WDS_IFACE_NAME_UTMS = 0x8004,/* typo of name */ QMI_WDS_IFACE_NAME_WLAN_LOCAL_BRKOUT = 0x8020, QMI_WDS_IFACE_NAME_IWLAN_EPDG = 0x8021, /* correct name, keep it backward compatible */ QMI_WDS_IFACE_NAME_UMTS = QMI_WDS_IFACE_NAME_UTMS, QMI_WDS_IFACE_NAME_EMBMS = 0x8882, QMI_WDS_IFACE_NAME_MODEM_LINK_LOCAL = 0x8888, QMI_WDS_IFACE_NAME_NOT_REPORTED = 0xFFFF } qmi_wds_iface_name_type; /* Tech Type maps to PS iface name */ typedef qmi_wds_iface_name_type qmi_wds_technology_type; typedef enum { QMI_WDS_HANDOFF_BEARER_IP_TYPE_INVALID = -1, QMI_WDS_HANDOFF_BEARER_IP_TYPE_V4 = 0, QMI_WDS_HANDOFF_BEARER_IP_TYPE_V6 = 1, QMI_WDS_HANDOFF_BEARER_IP_TYPE_V4V6 = 2, QMI_WDS_HANDOFF_BEARER_IP_TYPE_MAX } qmi_wds_handoff_bearer_ip_type; typedef struct { ipv4_addr_type ipv4_addr; ipv6_addr_type ipv6_addr; qmi_wds_handoff_bearer_ip_type bearer_ip_type; } qmi_wds_handoff_context_type; /* Parameter structure for start network interface command */ typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ /*Mandatory only valid for route lookup*/ qmi_wds_route_lookup_type route_lookup; unsigned long params_mask; /* Parameters, more will be added later */ unsigned char profile_index; unsigned char tech_pref; qmi_wds_iface_name_type xtended_tech_pref; unsigned char profile_index_3gpp2; qmi_ip_family_pref_type ip_family_pref; char apn_name[QMI_WDS_MAX_APN_STR_SIZE]; unsigned long primary_dns_ip4_addr_pref; unsigned long secondar_dns_ip4_addr_pref; unsigned long primary_nbns_addr_pref; unsigned long secondary_nbns_addr_pref; unsigned long ipv4_addr_pref; char username[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char password[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_auth_pref_type auth_pref; unsigned long iface_handle; qmi_wds_data_call_origin_type data_call_origin; qmi_wds_handoff_context_type handoff_context; } qmi_wds_start_nw_if_params_type; /* Parameters for route lookup... note these are just a subset of ** the start NW IF parameters and are just aliased. Also note that if ** you add any, they must be added to the route lookup valid params define ** below */ #define QMI_WDS_ROUTE_LOOK_UP_TECH_PREF_PARAM QMI_WDS_START_NW_XTENDED_TECH_PREF_PARAM #define QMI_WDS_ROUTE_LOOK_UP_PROFILE_IDX_PARAM QMI_WDS_START_NW_PROFILE_IDX_PARAM #define QMI_WDS_ROUTE_LOOK_UP_IP_FAMILY_PREF_PARAM QMI_WDS_START_NW_IP_FAMILY_PREF_PARAM #define QMI_WDS_ROUTE_LOOK_UP_APN_NAME_PARAM QMI_WDS_START_NW_APN_NAME_PARAM typedef qmi_wds_start_nw_if_params_type qmi_wds_route_look_up_params_type; typedef struct qmi_wds_route_look_up_rsp { unsigned long iface_handle; unsigned long priority; qmi_wds_iface_name_type tech_name; unsigned char qmi_inst_is_valid; /* TRUE if qmi_inst is valid, FALSE if not */ unsigned char qmi_inst; unsigned char mux_id_is_valid; /* TRUE if mux_id is valid, FALSE if not */ unsigned char mux; } qmi_wds_route_look_up_rsp_type; /************************************************************************ * Definitions associated with profile related functions ************************************************************************/ /* QOS related enums and structure */ /* Traffic class enum */ typedef enum { QMI_WDS_TC_SUBSCRIBED = 0, QMI_WDS_TC_CONVERSATIONAL = 1, QMI_WDS_TC_STREAMING = 2, QMI_WDS_TC_INTERACTIVE = 3, QMI_WDS_TC_BACKGROUND = 4 } qmi_wds_traffic_class_type; /* Delivery order enum */ typedef enum { QMI_WDS_DO_SUBSCRIBED = 0, QMI_WDS_DO_ON = 1, QMI_WDS_DO_OFF = 2 }qmi_wds_qos_delivery_order_type; /* SDU error ratio values */ typedef enum { QMI_WDS_SDU_ERR_RATIO_SUBSCRIBE = 0, QMI_WDS_SDU_ERR_RATIO_1ENEG2 = 1, QMI_WDS_SDU_ERR_RATIO_7ENEG3 = 2, QMI_WDS_SDU_ERR_RATIO_1ENEG3 = 3, QMI_WDS_SDU_ERR_RATIO_1ENEG4 = 4, QMI_WDS_SDU_ERR_RATIO_1ENEG5 = 5, QMI_WDS_SDU_ERR_RATIO_1ENEG6 = 6, QMI_WDS_SDU_ERR_RATIO_1ENEG1 = 7 } qmi_wds_sdu_err_ratio_type; /* BER values */ typedef enum { QMI_WDS_RESIDUAL_BER_SUBSCRIBE = 0, QMI_WDS_RESIDUAL_BER_5ENEG2 = 1, QMI_WDS_RESIDUAL_BER_1ENEG2 = 2, QMI_WDS_RESIDUAL_BER_5ENEG3 = 3, QMI_WDS_RESIDUAL_BER_4ENEG3 = 4, QMI_WDS_RESIDUAL_BER_1ENEG3 = 5, QMI_WDS_RESIDUAL_BER_1ENEG4 = 6, QMI_WDS_RESIDUAL_BER_1ENEG5 = 7, QMI_WDS_RESIDUAL_BER_1ENEG6 = 8, QMI_WDS_RESIDUAL_BER_6ENEG8 = 9 } qmi_wds_residual_ber_ratio_type; /* Delivery err SDU values */ typedef enum { QMI_WDS_DELIVER_ERR_SDU_SUBSCRIBE = 0, QMI_WDS_DELIVER_ERR_SDU_NO_DETECT = 1, QMI_WDS_DELIVER_ERR_SDU_DELIVER = 2, QMI_WDS_DELIVER_ERR_SDU_NO_DELIVER = 3 } qmi_wds_deliver_err_sdu_type; typedef enum { QMI_WDS_FALSE = 0x00, QMI_WDS_TRUE = 0x01 }qmi_wds_bool_type; /* UMTS QOS params structure */ typedef struct { qmi_wds_traffic_class_type traffic_class; unsigned long max_ul_bitrate; unsigned long max_dl_bitrate; unsigned long guaranteed_ul_bitrate; unsigned long guaranteed_dl_bitrate; qmi_wds_qos_delivery_order_type qos_delivery_order; unsigned long max_sdu_size; qmi_wds_sdu_err_ratio_type sdu_error_ratio; qmi_wds_residual_ber_ratio_type residual_ber_ratio; qmi_wds_deliver_err_sdu_type deliver_error_sdu; unsigned long transfer_delay; unsigned long traffic_handling_prio; qmi_wds_bool_type signal_indication; //field valid only for umts_qos with signal indication } qmi_wds_umts_qos_params_type; /* GPRS QOS params structure */ typedef struct { unsigned long precedence_class; unsigned long delay_class; unsigned long reliability_class; unsigned long peak_throughput_class; unsigned long mean_throughput_class; } qmi_wds_gprs_qos_params_type; /* PDP type */ typedef enum { QMI_WDS_PDP_TYPE_IP = 0x00, QMI_WDS_PDP_TYPE_IPV4 = QMI_WDS_PDP_TYPE_IP, QMI_WDS_PDP_TYPE_IPV6 = 0x02, QMI_WDS_PDP_TYPE_IPV4V6 = 0x03 } qmi_wds_pdp_type; /* PDP type */ typedef enum { QMI_WDS_PCSCF_ADDR_VIA_PCO_DISABLED = 0, QMI_WDS_PCSCF_ADDR_VIA_PCO_ENABLED = 1 } qmi_wds_pcscf_via_pco_type; typedef enum { QMI_WDS_IP_UNKNOWN = 0x00, QMI_WDS_IPV4_TYPE = 0x04, QMI_WDS_IPV6_TYPE = 0x06 }qmi_wds_ip_family; typedef enum { CN_FLAG_TRUE = 0x01, CN_FLAG_FALSE = 0x00 }qmi_wds_cn_flag_true_false; typedef struct { /*Long aligned on word boundary, short aligned on 2byte boundary char aligned on byte boundary*/ unsigned long ipsec_param_index; unsigned long flow_lable; unsigned short destination_port_range_start; unsigned short destination_port_range_end; unsigned short source_port_range_start; unsigned short source_port_range_end; unsigned short tos_mask; ipv6_addr_type source_ip; //If ipv4 fill only 1st 4 bytes unsigned char ip_family; //4 - IPV4 , 6 - IPV6 unsigned char source_ip_mask; unsigned char next_header; unsigned char filter_id; unsigned char eval_id; }qmi_wds_tft_params_type; typedef struct { unsigned int mnc; qmi_wds_bool_type mnc_includes_pcs_digit; }qmi_wds_mnc_type; #define QMI_WDS_UMTS_PROFILE_NAME_PARAM_MASK 0x0000000000000001 /* profile_name */ #define QMI_WDS_UMTS_PROFILE_PDP_TYPE_PARAM_MASK 0x0000000000000002 /* pdp_type */ #define QMI_WDS_UMTS_PROFILE_APN_NAME_PARAM_MASK 0x0000000000000004 /* apn_name */ #define QMI_WDS_UMTS_PROFILE_PRIM_DNS_PARAM_MASK 0x0000000000000008 /* primary_dns_pref_addr*/ #define QMI_WDS_UMTS_PROFILE_SEC_DNS_PARAM_MASK 0x0000000000000010 /* secondary_dns_pref_addr*/ #define QMI_WDS_UMTS_PROFILE_UMTS_REQ_QOS_PARAM_MASK 0x0000000000000020 /* umts_requested_qos*/ #define QMI_WDS_UMTS_PROFILE_UMTS_MIN_QOS_PARAM_MASK 0x0000000000000040 /* umts_minimum_qos*/ #define QMI_WDS_UMTS_PROFILE_GPRS_REQ_QOS_PARAM_MASK 0x0000000000000080 /* umts_requested_qos*/ #define QMI_WDS_UMTS_PROFILE_GPRS_MIN_QOS_PARAM_MASK 0x0000000000000100 /* umts_minimum_qos*/ #define QMI_WDS_UMTS_PROFILE_USERNAME_PARAM_MASK 0x0000000000000200 /* username*/ #define QMI_WDS_UMTS_PROFILE_PASSWORD_PARAM_MASK 0x0000000000000400 /* password*/ #define QMI_WDS_UMTS_PROFILE_AUTH_PREF_PARAM_MASK 0x0000000000000800 /* auth_pref*/ #define QMI_WDS_UMTS_PROFILE_IPV4_ADDR_PREF_PARAM_MASK 0x0000000000001000 /* ipv4_pref_addr*/ #define QMI_WDS_UMTS_PROFILE_PCSCF_ADDR_VIA_PCO_PARAM_MASK 0x0000000000002000 /* pcscf_addr_via_pco*/ #define QMI_WDS_UMTS_PROFILE_HEADER_COMPRESSION_PARAM_MASK 0x0000000000004000 #define QMI_WDS_UMTS_PROFILE_DATA_COMPRESSION_PARAM_MASK 0x0000000000008000 #define QMI_WDS_UMTS_PROFILE_PDP_ACCESS_CONTROL_PARAM_MASK 0x0000000000010000 #define QMI_WDS_UMTS_PROFILE_PCSCF_VIA_DHCP_PARAM_MASK 0x0000000000020000 #define QMI_WDS_UMTS_PROFILE_IM_CN_FLAG_PARAM_MASK 0x0000000000040000 #define QMI_WDS_UMTS_PROFILE_TFT_FILTER_ID_1_PARAM_MASK 0x0000000000080000 #define QMI_WDS_UMTS_PROFILE_TFT_FILTER_ID_2_PARAM_MASK 0x0000000000100000 #define QMI_WDS_UMTS_PROFILE_PDP_CONTEXT_NUMBER_PARAM_MASK 0x0000000000200000 #define QMI_WDS_UMTS_PROFILE_PDP_CONTEXT_SECONDARY_PARAM_MASK 0x0000000000400000 #define QMI_WDS_UMTS_PROFILE_PDP_PRIMARY_ID_PARAM_MASK 0x0000000000800000 #define QMI_WDS_UMTS_PROFILE_IPV6_ADDR_PREF_PARAM_MASK 0x0000000001000000 #define QMI_WDS_UMTS_PROFILE_UMTS_REQ_QOS_EXT_PARAM_MASK 0x0000000002000000 #define QMI_WDS_UMTS_PROFILE_UMTS_MIN_QOS_EXT_PARAM_MASK 0x0000000004000000 #define QMI_WDS_UMTS_PROFILE_PRIMARY_DNS_IPV6_ADDR_PREF_PARAM_MASK 0x0000000008000000 #define QMI_WDS_UMTS_PROFILE_SECONDARY_DNS_IPV6_ADDR_PREF_PARAM_MASK 0x0000000010000000 #define QMI_WDS_UMTS_PROFILE_ADDR_ALLOC_PREF_PARAM_MASK 0x0000000020000000 #define QMI_WDS_UMTS_PROFILE_LTE_QOS_PARAMS_PARAM_MASK 0x0000000040000000 #define QMI_WDS_UMTS_PROFILE_APN_DISABLED_FLAG_PARAM_MASK 0x0000000080000000 #define QMI_WDS_UMTS_PROFILE_PDN_INACTIVITY_TIMEOUT_PARAM_MASK 0x0000000100000000 #define QMI_WDS_UMTS_PROFILE_APN_CLASS_PARAM_MASK 0x0000000200000000 #define QMI_WDS_UMTS_PROFILE_APN_BEARER_PARAM_MASK 0x0000000400000000 #define QMI_WDS_UMTS_PROFILE_SUPPORT_EMERGENCY_CALLS_PARAM_MASK 0x0000000800000000 #define QMI_WDS_UMTS_PROFILE_OP_PCO_ID_PARAM_MASK 0x0000001000000000 #define QMI_WDS_UMTS_PROFILE_PCO_MCC_PARAM_MASK 0x0000002000000000 #define QMI_WDS_UMTS_PROFILE_MNC_PARAM_MASK 0x0000004000000000 #define QMI_WDS_UMTS_PROFILE_IS_PERSISTENT_PARAM_MASK 0x0000008000000000 #define QMI_WDS_UMTS_MAX_PDN_CONN_PER_BLOCK 0x0000010000000000 #define QMI_WDS_UMTS_MAX_PDN_CONN_TIMER 0x0000020000000000 #define QMI_WDS_UMTS_PDN_REQ_WAIT_INTERVAL 0x0000040000000000 /* Profile information */ typedef struct { /* bit mask which indicates which of the below parameter fields ** contain valid values */ uint64_t param_mask; /* All parameters are optional, and their inclusion/validity ** is indicated by set bit in param_mask */ char profile_name[QMI_WDS_MAX_PROFILE_STR_SIZE]; qmi_wds_pdp_type pdp_type; char apn_name[QMI_WDS_MAX_APN_STR_SIZE]; unsigned long primary_dns_pref_addr; unsigned long secondary_dns_pref_addr; qmi_wds_umts_qos_params_type umts_requested_qos; qmi_wds_umts_qos_params_type umts_minimum_qos; qmi_wds_gprs_qos_params_type gprs_requested_qos; qmi_wds_gprs_qos_params_type gprs_minimum_qos; char username[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char password[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_auth_pref_type auth_pref; unsigned long ipv4_pref_addr; qmi_wds_pcscf_via_pco_type pcscf_addr_via_pco; unsigned char header_compression; unsigned char data_compression; unsigned char pdp_access_control; unsigned char pcscf_via_dhcp; unsigned char im_cn_flag; qmi_wds_tft_params_type tft_filter_id_1; qmi_wds_tft_params_type tft_filter_id_2; unsigned char pdp_context_number; unsigned char pdp_context_secondary; unsigned char pdp_context_primary_id_number; ipv6_addr_type ipv6_addr_pref; qmi_wds_umts_qos_params_type umts_minimum_qos_sig_ind; qmi_wds_umts_qos_params_type umts_requested_qos_sig_ind; ipv6_addr_type primary_dns_ipv6_addr_pref; ipv6_addr_type secondary_dns_ipv6_addr_pref; qmi_wds_addr_alloc_pref addr_alloc_pref; qmi_wds_lte_qos_params_type lte_qos_params; qmi_wds_bool_type apn_disabled_flag; unsigned long pdn_inactivity_timeout; unsigned char apn_class; uint64_t apn_bearer; qmi_wds_bool_type support_emergency_calls; unsigned short op_pco_id; unsigned short pco_mcc; qmi_wds_mnc_type mnc; qmi_wds_bool_type is_persistent; unsigned short max_pdn_conn_per_block; unsigned short max_pdn_conn_timer; unsigned short pdn_req_wait_interval; } qmi_wds_umts_profile_params_type; typedef enum { QMI_WDS_LOW_SO15 = 0x00, QMI_WDS_MED_SO33_LOW_RSCH = 0x01, QMI_WDS_HIGH_SO33_HIGH_RSCH = 0x02 }qmi_wds_cdma_data_rate_type; typedef enum { QMI_WDS_CDMA_HYBRID_EVDO = 0x00, QMI_WDS_CDMA_ONLY = 0x01, QMI_WDS_HDR_ONLY = 0x02 }qmi_wds_cdma_data_mode_type; typedef enum { QMI_WDS_CDMA_DEFAULT_APP = 0x00000001, QMI_WDS_CDMA_LBS_APP = 0x00000020, QMI_WDS_CDMA_TETHERED_APP = 0x00000040 }qmi_wds_cdma_app_type; typedef enum { QMI_WDS_IPV4_PDN_TYPE = 0x00, QMI_WDS_IPV6_PDN_TYPE = 0x01, QMI_WDS_IPV4_OR_IPV6_PDN_TYPE = 0x02, QMI_WDS_UNSPECIFIED_PDN_TYPE = 0x03 // No preference in PDN type }qmi_wds_cdma_pdn_type; typedef enum { QMI_WDS_RAT_HRPD_TYPE = 0x01, QMI_WDS_RAT_EHRPD_TYPE = 0x02, QMI_WDS_RAT_HRPD_EHRPD_TYPE = 0x03 }qmi_wds_cdma_rat_type; #define QMI_WDS_CDMA_PROFILE_DNS_SERVER_PREF_PARAM_MASK 0x0000000000000001 #define QMI_WDS_CDMA_PROFILE_PPP_SESSION_CLOSE_TIMER_DO_PARAM_MASK 0x0000000000000002 #define QMI_WDS_CDMA_PROFILE_PPP_SESSION_CLOSE_TIMER_1X_PARAM_MASK 0x0000000000000004 #define QMI_WDS_CDMA_PROFILE_ALLOW_LINGER_PARAM_MASK 0x0000000000000008 #define QMI_WDS_CDMA_PROFILE_LCP_ACK_TIMEOUT_PARAM_MASK 0x0000000000000010 #define QMI_WDS_CDMA_PROFILE_AUTH_TIMEOUT_PARAM_MASK 0x0000000000000020 #define QMI_WDS_CDMA_PROFILE_LCP_CONFIG_RETRY_RECOUNT_PARAM_MASK 0x0000000000000040 #define QMI_WDS_CDMA_PROFILE_AUTH_RETRY_RECOUNT_PARAM_MASK 0x0000000000000080 #define QMI_WDS_CDMA_PROFILE_AUTH_PROTOCOL_PARAM_MASK 0x0000000000000100 #define QMI_WDS_CDMA_PROFILE_USERNAME_PARAM_MASK 0x0000000000000200 #define QMI_WDS_CDMA_PROFILE_PASSWORD_PARAM_MASK 0x0000000000000400 #define QMI_WDS_CDMA_PROFILE_DATA_RATE_PARAM_MASK 0x0000000000000800 #define QMI_WDS_CDMA_PROFILE_DATA_MODE_PARAM_MASK 0x0000000000001000 #define QMI_WDS_CDMA_PROFILE_APP_TYPE_PARAM_MASK 0x0000000000002000 #define QMI_WDS_CDMA_PROFILE_APP_PRIORITY_PARAM_MASK 0x0000000000004000 #define QMI_WDS_CDMA_PROFILE_APN_STRING_PARAM_MASK 0x0000000000008000 #define QMI_WDS_CDMA_PROFILE_PDN_TYPE_PARAM_MASK 0x0000000000010000 #define QMI_WDS_CDMA_PROFILE_IS_PCSCF_ADDR_NEEDED_PARAM_MASK 0x0000000000020000 #define QMI_WDS_CDMA_PROFILE_PRIM_V4_DNS_ADDR_PARAM_MASK 0x0000000000040000 #define QMI_WDS_CDMA_PROFILE_SEC_V4_DNS_ADDR_PARAM_MASK 0x0000000000080000 #define QMI_WDS_CDMA_PROFILE_PRIM_V6_DNS_ADDR_PARAM_MASK 0x0000000000100000 #define QMI_WDS_CDMA_PROFILE_SEC_V6_DNS_ADDR_PARAM_MASK 0x0000000000200000 #define QMI_WDS_CDMA_PROFILE_IPCP_ACK_TIMEOUT_PARAM_MASK 0x0000000000400000 #define QMI_WDS_CDMA_PROFILE_IPCP_CONFIG_RETRY_RECOUNT_PARAM_MASK 0x0000000000800000 #define QMI_WDS_CDMA_PROFILE_RAT_TYPE_PARAM_MASK 0x0000000001000000 #define QMI_WDS_CDMA_PROFILE_IS_PERSISTENT_PARAM_MASK 0x0000000002000000 #define QMI_WDS_CDMA_PROFILE_APN_ENABLED_PARAM_MASK 0x0000000004000000 #define QMI_WDS_CDMA_PROFILE_PDN_INACTIVITY_TIMEOUT_PARAM_MASK 0x0000000008000000 #define QMI_WDS_CDMA_PROFILE_APN_CLASS_PARAM_MASK 0x0000000010000000 #define QMI_WDS_CDMA_PROFILE_PDN_LEVEL_AUTH_PROTOCOL_PARAM_MASK 0x0000000020000000 #define QMI_WDS_CDMA_PROFILE_PDN_LEVEL_USER_ID_PARAM_MASK 0x0000000040000000 #define QMI_WDS_CDMA_PROFILE_PDN_LEVEL_AUTH_PWD_PARAM_MASK 0x0000000080000000 #define QMI_WDS_CDMA_PROFILE_PDN_LABEL_PARAM_MASK 0x0000000100000000 #define QMI_WDS_CDMA_PROFILE_OPERATOR_RESERVED_PCO_ID_PARAM_MASK 0x0000000200000000 #define QMI_WDS_CDMA_PROFILE_MCC_PARAM_MASK 0x0000000400000000 #define QMI_WDS_CDMA_PROFILE_MNC_PARAM_MASK 0x0000000800000000 typedef struct { /* bit mask which indicates which of the below parameter fields ** contain valid values */ uint64_t param_mask; qmi_wds_bool_type dns_server_pref; unsigned long ppp_session_close_timer_do; unsigned long ppp_session_close_timer_1x; unsigned char allow_linger; unsigned short lcp_ack_timeout; unsigned short ipcp_ack_timeout; unsigned short auth_timeout; unsigned char lcp_config_req_retry_count; unsigned char ipcp_config_req_retry_count; unsigned char auth_retry_count; qmi_wds_auth_pref_type auth_protocol; char username[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char password[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_cdma_data_rate_type data_rate; qmi_wds_cdma_data_mode_type data_mode; qmi_wds_cdma_app_type app_type; // Cannot be used for modification; // Is only used to search profiles with the specified app type. unsigned char app_priority; // Cannot be used for modification char apn_name[QMI_WDS_MAX_APN_STR_SIZE]; qmi_wds_cdma_pdn_type pdn_type; qmi_wds_bool_type is_pcscf_addr_needed; unsigned long primary_dns_ipv4_pref_addr; unsigned long secondary_dns_ipv4_pref_addr; ipv6_addr_type primary_dns_ipv6_addr_pref; ipv6_addr_type secondary_dns_ipv6_addr_pref; qmi_wds_addr_alloc_pref addr_alloc_pref; qmi_wds_bool_type apn_disabled_flag; unsigned long pdn_inactivity_timeout; unsigned char apn_class; unsigned char pdn_level_auth_protocol; char pdn_level_user_id[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char pdn_level_auth_pwd[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char pdn_label[QMI_WDS_MAX_APN_STR_SIZE]; uint64_t apn_bearer; qmi_wds_bool_type support_emergency_calls; unsigned short op_pco_id; unsigned short pco_mcc; qmi_wds_mnc_type mnc; qmi_wds_cdma_rat_type rat_type; qmi_wds_bool_type is_persistent; }qmi_wds_cdma_profile_params_type; /* 64 bit Mask*/ #define QMI_WDS_EPC_PROFILE_NAME_PARAM_MASK 0x0000000000000001 /* profile_name */ #define QMI_WDS_EPC_PROFILE_APN_NAME_PARAM_MASK 0x0000000000000002 /* apn_name */ #define QMI_WDS_EPC_PROFILE_USERNAME_PARAM_MASK 0x0000000000000004 /* username*/ #define QMI_WDS_EPC_PROFILE_PASSWORD_PARAM_MASK 0x0000000000000008 /* password*/ #define QMI_WDS_EPC_PROFILE_PRIMARY_DNS_IPV6_ADDR_PREF_PARAM_MASK 0x0000000000000010 /* IPV6 Primary DNS address preference*/ #define QMI_WDS_EPC_PROFILE_SECONDARY_DNS_IPV6_ADDR_PREF_PARAM_MASK 0x0000000000000020 /* IPV6 Secondary DNS address preference*/ #define QMI_WDS_EPC_PROFILE_IS_PERSISTENT_PARAM_MASK 0x0000000000000040 /* Profile Persistance preference*/ #define QMI_WDS_EPC_UMTS_PROFILE_PDP_TYPE_PARAM_MASK 0x0000000000000080 /* pdp_type */ #define QMI_WDS_EPC_UMTS_PROFILE_PRIM_DNS_PARAM_MASK 0x0000000000000100 /* primary_dns_pref_addr*/ #define QMI_WDS_EPC_UMTS_PROFILE_SEC_DNS_PARAM_MASK 0x0000000000000200 /* secondary_dns_pref_addr*/ #define QMI_WDS_EPC_UMTS_PROFILE_UMTS_REQ_QOS_PARAM_MASK 0x0000000000000400 /* umts_requested_qos*/ #define QMI_WDS_EPC_UMTS_PROFILE_UMTS_MIN_QOS_PARAM_MASK 0x0000000000000800 /* umts_minimum_qos*/ #define QMI_WDS_EPC_UMTS_PROFILE_GPRS_REQ_QOS_PARAM_MASK 0x0000000000001000 /* umts_requested_qos*/ #define QMI_WDS_EPC_UMTS_PROFILE_GPRS_MIN_QOS_PARAM_MASK 0x0000000000002000 /* umts_minimum_qos*/ #define QMI_WDS_EPC_UMTS_PROFILE_AUTH_PREF_PARAM_MASK 0x0000000000004000 /* auth_pref*/ #define QMI_WDS_EPC_UMTS_PROFILE_IPV4_ADDR_PREF_PARAM_MASK 0x0000000000008000 /* ipv4_pref_addr*/ #define QMI_WDS_EPC_UMTS_PROFILE_PCSCF_ADDR_VIA_PCO_PARAM_MASK 0x0000000000010000 /* pcscf_addr_via_pco*/ #define QMI_WDS_EPC_UMTS_PROFILE_HEADER_COMPRESSION_PARAM_MASK 0x0000000000020000 #define QMI_WDS_EPC_UMTS_PROFILE_DATA_COMPRESSION_PARAM_MASK 0x0000000000040000 #define QMI_WDS_EPC_UMTS_PROFILE_PDP_ACCESS_CONTROL_PARAM_MASK 0x0000000000080000 #define QMI_WDS_EPC_UMTS_PROFILE_PCSCF_VIA_DHCP_PARAM_MASK 0x0000000000100000 #define QMI_WDS_EPC_UMTS_PROFILE_IM_CN_FLAG_PARAM_MASK 0x0000000000200000 #define QMI_WDS_EPC_UMTS_PROFILE_TFT_FILTER_ID_1_PARAM_MASK 0x0000000000400000 #define QMI_WDS_EPC_UMTS_PROFILE_TFT_FILTER_ID_2_PARAM_MASK 0x0000000000800000 #define QMI_WDS_EPC_UMTS_PROFILE_PDP_CONTEXT_NUMBER_PARAM_MASK 0x0000000001000000 #define QMI_WDS_EPC_UMTS_PROFILE_PDP_CONTEXT_SECONDARY_PARAM_MASK 0x0000000002000000 #define QMI_WDS_EPC_UMTS_PROFILE_PDP_PRIMARY_ID_PARAM_MASK 0x0000000004000000 #define QMI_WDS_EPC_UMTS_PROFILE_UMTS_REQ_QOS_EXT_PARAM_MASK 0x0000000008000000 #define QMI_WDS_EPC_UMTS_PROFILE_UMTS_MIN_QOS_EXT_PARAM_MASK 0x0000000010000000 #define QMI_WDS_EPC_UMTS_PROFILE_IPV6_ADDR_PREF_PARAM_MASK 0x0000000020000000 #define QMI_WDS_EPC_UMTS_PROFILE_SUPPORT_EMERGENCY_CALLS_PARAM_MASK 0x0000000040000000 #define QMI_WDS_EPC_CDMA_PROFILE_DNS_SERVER_PREF_PARAM_MASK 0x0000000080000000 #define QMI_WDS_EPC_CDMA_PROFILE_PPP_SESSION_CLOSE_TIMER_DO_PARAM_MASK 0x0000000100000000 #define QMI_WDS_EPC_CDMA_PROFILE_PPP_SESSION_CLOSE_TIMER_1X_PARAM_MASK 0x0000000200000000 #define QMI_WDS_EPC_CDMA_PROFILE_ALLOW_LINGER_PARAM_MASK 0x0000000400000000 #define QMI_WDS_EPC_CDMA_PROFILE_LCP_ACK_TIMEOUT_PARAM_MASK 0x0000000800000000 #define QMI_WDS_EPC_CDMA_PROFILE_AUTH_TIMEOUT_PARAM_MASK 0x0000001000000000 #define QMI_WDS_EPC_CDMA_PROFILE_LCP_CONFIG_RETRY_RECOUNT_PARAM_MASK 0x0000002000000000 #define QMI_WDS_EPC_CDMA_PROFILE_AUTH_RETRY_RECOUNT_PARAM_MASK 0x0000004000000000 #define QMI_WDS_EPC_CDMA_PROFILE_AUTH_PROTOCOL_PARAM_MASK 0x0000008000000000 #define QMI_WDS_EPC_CDMA_PROFILE_DATA_RATE_PARAM_MASK 0x0000010000000000 #define QMI_WDS_EPC_CDMA_PROFILE_DATA_MODE_PARAM_MASK 0x0000020000000000 #define QMI_WDS_EPC_CDMA_PROFILE_APP_TYPE_PARAM_MASK 0x0000040000000000 #define QMI_WDS_EPC_CDMA_PROFILE_APP_PRIORITY_PARAM_MASK 0x0000080000000000 #define QMI_WDS_EPC_CDMA_PROFILE_PDN_TYPE_PARAM_MASK 0x0000100000000000 #define QMI_WDS_EPC_CDMA_PROFILE_IS_PCSCF_ADDR_NEEDED_PARAM_MASK 0x0000200000000000 #define QMI_WDS_EPC_CDMA_PROFILE_PRIM_V4_DNS_ADDR_PARAM_MASK 0x0000400000000000 #define QMI_WDS_EPC_CDMA_PROFILE_SEC_V4_DNS_ADDR_PARAM_MASK 0x0000800000000000 #define QMI_WDS_EPC_CDMA_PROFILE_IPCP_ACK_TIMEOUT_PARAM_MASK 0x0001000000000000 #define QMI_WDS_EPC_CDMA_PROFILE_IPCP_CONFIG_RETRY_RECOUNT_PARAM_MASK 0x0002000000000000 #define QMI_WDS_EPC_CDMA_PROFILE_RAT_TYPE_PARAM_MASK 0x0004000000000000 #define QMI_WDS_EPC_COMMON_AUTH_PROTOCOL_PARAM_MASK 0x0008000000000000 #define QMI_WDS_EPC_COMMON_AUTH_PASSWORD_PARAM_MASK 0x0010000000000000 #define QMI_WDS_EPC_COMMON_USER_ID_PARAM_MASK 0x0020000000000000 #define QMI_WDS_EPC_COMMON_APN_CLASS_PARAM_MASK 0x0040000000000000 #define QMI_WDS_EPC_COMMON_APN_DISABLED_PARAM_MASK 0x0080000000000000 #define QMI_WDS_EPC_COMMON_PRIMARY_DNS_IPV4_PARAM_MASK 0x0100000000000000 #define QMI_WDS_EPC_COMMON_SECONDARY_DNS_IPV4_PARAM_MASK 0x0200000000000000 #define QMI_WDS_EPC_COMMON_PRIMARY_DNS_IPV6_PARAM_MASK 0x0400000000000000 #define QMI_WDS_EPC_COMMON_SECONDARY_DNS_IPV6_PARAM_MASK 0x0800000000000000 #define QMI_WDS_EPC_UMTS_MAX_PDN_CONN_PER_BLOCK 0x1000000000000000 #define QMI_WDS_EPC_UMTS_MAX_PDN_CONN_TIMER 0x2000000000000000 #define QMI_WDS_EPC_UMTS_PDN_REQ_WAIT_INTERVAL 0x4000000000000000 /* Max values reached for a 64 bit mask*/ #define QMI_WDS_EPC_EXTENDED_PARAM_MASK 0x8000000000000000 #define QMI_WDS_EPC_PROFILE_PDN_LEVEL_AUTH_PROTOCOL_PARAM_MASK 0x0000000000000001 #define QMI_WDS_EPC_PROFILE_PDN_LEVEL_USER_ID_PARAM_MASK 0x0000000000000002 #define QMI_WDS_EPC_PROFILE_PDN_LEVEL_AUTH_PWD_PARAM_MASK 0x0000000000000004 #define QMI_WDS_EPC_PROFILE_PDN_LEVEL_INACTIVITY_TIMEOUT_MASK 0x0000000000000010 #define QMI_WDS_EPC_PROFILE_PDN_LEVEL_INACTIVITY_TIMEOUT_3GPP2_MASK 0x0000000000000020 /* Profile information */ typedef struct { /* bit mask which indicates which of the below parameter fields ** contain valid values */ uint64_t param_mask; /* Extended bit mask for next 64 params, shall be looked at if ** param_mask is set to QMI_WDS_EPC_EXTENDED_PARAM_MASK(0x8000000000000000) */ uint64_t extended_param_mask; /* All parameters are optional, and their inclusion/validity ** is indicated by set bit in param_mask */ char profile_name[QMI_WDS_MAX_PROFILE_STR_SIZE]; qmi_wds_pdp_type pdp_type; char apn_name[QMI_WDS_MAX_APN_STR_SIZE]; char cdma_apn_string[QMI_WDS_MAX_APN_STR_SIZE]; unsigned long primary_dns_pref_addr; unsigned long secondary_dns_pref_addr; char common_username[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char common_password[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_auth_pref_type common_auth_pref; qmi_wds_bool_type common_apn_disabled_flag; unsigned char common_apn_class; qmi_wds_umts_qos_params_type umts_requested_qos; qmi_wds_umts_qos_params_type umts_minimum_qos; qmi_wds_gprs_qos_params_type gprs_requested_qos; qmi_wds_gprs_qos_params_type gprs_minimum_qos; char username[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char password[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_auth_pref_type auth_pref; char cdma_username[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char cdma_password[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_auth_pref_type auth_protocol; unsigned long ipv4_pref_addr; qmi_wds_pcscf_via_pco_type pcscf_addr_via_pco; unsigned char header_compression; unsigned char data_compression; unsigned char pdp_access_control; unsigned char pcscf_via_dhcp; unsigned char im_cn_flag; qmi_wds_tft_params_type tft_filter_id_1; qmi_wds_tft_params_type tft_filter_id_2; unsigned char pdp_context_number; unsigned char pdp_context_secondary; unsigned char pdp_context_primary_id_number; ipv6_addr_type ipv6_addr_pref; qmi_wds_umts_qos_params_type umts_minimum_qos_sig_ind; qmi_wds_umts_qos_params_type umts_requested_qos_sig_ind; ipv6_addr_type primary_dns_ipv6_addr_pref; ipv6_addr_type secondary_dns_ipv6_addr_pref; qmi_wds_bool_type is_persistent; qmi_wds_bool_type support_emergency_calls; unsigned char pdn_level_auth_protocol; char pdn_level_user_id[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; char pdn_level_auth_pwd[QMI_WDS_MAX_USERNAME_PASS_STR_SIZE]; qmi_wds_bool_type dns_server_pref; unsigned long ppp_session_close_timer_do; unsigned long ppp_session_close_timer_1x; unsigned char allow_linger; unsigned short lcp_ack_timeout; unsigned short ipcp_ack_timeout; unsigned short auth_timeout; unsigned char lcp_config_req_retry_count; unsigned char ipcp_config_req_retry_count; unsigned char auth_retry_count; qmi_wds_cdma_data_rate_type data_rate; qmi_wds_cdma_data_mode_type data_mode; qmi_wds_cdma_app_type app_type; // Cannot be used for modification; // Is only used to search profiles with the specified app type. unsigned char app_priority; // Cannot be used for modification qmi_wds_cdma_pdn_type pdn_type; qmi_wds_bool_type is_pcscf_addr_needed; unsigned long primary_dns_ipv4_pref_addr; unsigned long secondary_dns_ipv4_pref_addr; qmi_wds_cdma_rat_type rat_type; unsigned short max_pdn_conn_per_block; unsigned short max_pdn_conn_timer; unsigned short pdn_req_wait_interval; unsigned long pdn_inactivity_timeout; unsigned long pdn_inactivity_timeout_3gpp2; } qmi_wds_epc_profile_params_type; typedef union { qmi_wds_umts_profile_params_type umts_profile_params; qmi_wds_cdma_profile_params_type cdma_profile_params; qmi_wds_epc_profile_params_type epc_profile_params; } qmi_wds_profile_params_type; typedef enum { QMI_WDS_PROFILE_PARAM_ID_MIN = 0x17, QMI_WDS_UMTS_REQ_QOS = QMI_WDS_PROFILE_PARAM_ID_MIN, QMI_WDS_UMTS_MIN_QOS = 0x18, QMI_WDS_GPRS_REQ_QOS = 0x19, QMI_WDS_GPRS_MIN_QOS = 0x1A, QMI_WDS_TFT_FILTER_ID_1 = 0x23, QMI_WDS_TFT_FILTER_ID_2 = 0x24, QMI_WDS_PROFILE_PARAM_ID_MAX = QMI_WDS_TFT_FILTER_ID_2 }qmi_wds_reset_profile_param_type; typedef enum { QMI_WDS_PROFILE_SOCKETS_FAMILY = 0x00, QMI_WDS_PROFILE_ATCOP_FAMILY = 0x01, QMI_WDS_PROFILE_RMNET_FAMILY = QMI_WDS_PROFILE_ATCOP_FAMILY }qmi_wds_profile_family; /************************************************************************ * Definitions associated with qmi_wds_start_nw_if() ************************************************************************/ #define QMI_WDS_GET_CURR_CALL_INFO_PROFILE_ID_PARAM_MASK (1<<0) #define QMI_WDS_GET_CURR_CALL_INFO_PROFILE_NAME_PARAM_MASK (1<<1) #define QMI_WDS_GET_CURR_CALL_INFO_PDP_TYPE_PARAM_MASK (1<<2) #define QMI_WDS_GET_CURR_CALL_INFO_APN_NAME_PARAM_MASK (1<<3) #define QMI_WDS_GET_CURR_CALL_INFO_DNS_ADDR_PARAM_MASK (1<<4) #define QMI_WDS_GET_CURR_CALL_INFO_UMTS_GPRS_GRNTD_QOS_PARAM_MASK (1<<5) #define QMI_WDS_GET_CURR_CALL_INFO_USERNAME_PARAM_MASK (1<<6) #define QMI_WDS_GET_CURR_CALL_INFO_AUTH_PROTOCOL_PARAM_MASK (1<<7) #define QMI_WDS_GET_CURR_CALL_INFO_IP_ADDRESS_PARAM_MASK (1<<8) #define QMI_WDS_GET_CURR_CALL_INFO_GATEWAY_INFO_PARAM_MASK (1<<9) #define QMI_WDS_GET_CURR_CALL_INFO_PCSCF_ADDR_USING_PCO_PARAM_MASK (1<<10) #define QMI_WDS_GET_CURR_CALL_INFO_PCSCF_SERV_ADDR_PARAM_MASK (1<<11) #define QMI_WDS_GET_CURR_CALL_INFO_PCSCF_DOMAIN_NAME_LIST_PARAM_MASK (1<<12) #define QMI_WDS_GET_CURR_CALL_INFO_MTU_PARAM_MASK (1<<13) #define QMI_WDS_GET_CURR_CALL_INFO_DOMAIN_NAME_LIST_PARAM_MASK (1<<14) #define QMI_WDS_GET_CURR_CALL_INFO_IP_FAMILY_PARAM_MASK (1<<15) #define QMI_WDS_GET_CURR_CALL_INFO_IM_CN_FLAG_PARAM_MASK (1<<16) #define QMI_WDS_GET_CURR_CALL_INFO_TECHNOLOGY_NAME_PARAM_MASK (1<<17) #define QMI_WDS_GET_CURR_CALL_INFO_OPERATOR_RESERVED_PCO_PARAM_MASK (1<<18) typedef unsigned long qmi_wds_req_runtime_settings_params_type ; /* Set this Param type to any of the above Params for the request*/ /* Profile ID structure */ typedef struct { unsigned long valid_data_read; qmi_wds_profile_tech_type technology; unsigned long profile_index; } qmi_wds_profile_id_type; /************************************************************************ * Definitions associated with QMI_WDS_GET_SESSION_SETTINGS ************************************************************************/ #define QMI_WDS_CURR_CALL_INFO_IPV4_GATEWAY_ADDR 0x00000001 /* gateway address */ #define QMI_WDS_CURR_CALL_INFO_SUBNET_MASK 0x00000002 /* subnet mask */ #define QMI_WDS_CURR_CALL_INFO_PCSCF_ADDR_USNG_PCO 0x00000004 #define QMI_WDS_CURR_CALL_INFO_PCSCF_IPV4_ADDR_LIST 0x00000008 #define QMI_WDS_CURR_CALL_INFO_PCSCF_FQDN_LIST 0x00000010 #define QMI_WDS_CURR_CALL_INFO_IPV6_ADDR 0x00000020 #define QMI_WDS_CURR_CALL_INFO_IPV6_GTWY_ADDR 0x00000040 #define QMI_WDS_CURR_CALL_INFO_PRIMARY_DNS_IPV6_ADDR 0x00000080 #define QMI_WDS_CURR_CALL_INFO_MTU 0x00000100 #define QMI_WDS_CURR_CALL_INFO_DOMAIN_NAME_LIST 0x00000200 #define QMI_WDS_CURR_CALL_INFO_IP_FAMILY 0x00000400 #define QMI_WDS_CURR_CALL_INFO_IM_CN_FLAG 0x00000800 #define QMI_WDS_CURR_CALL_INFO_TECHNOLOGY 0x00001000 #define QMI_WDS_CURR_CALL_INFO_IPV4_ADDR 0x00002000 #define QMI_WDS_CURR_CALL_INFO_PRIMARY_DNS_IPV4_ADDR 0x00004000 #define QMI_WDS_CURR_CALL_INFO_SECONDARY_DNS_IPV4_ADDR 0x00008000 #define QMI_WDS_CURR_CALL_INFO_SECONDARY_DNS_IPV6_ADDR 0x00010000 #define QMI_WDS_CURR_CALL_INFO_PCSCF_IPV6_ADDR_LIST 0x00020000 #define QMI_WDS_CURR_CALL_INFO_OPERATOR_RESERVED_PCO 0x00040000 typedef struct { int fqdn_length; unsigned char fqdn_string[QMI_WDS_MAX_PROFILE_STR_SIZE]; }qmi_wds_fqdn_strings; typedef struct { int domain_name_len; unsigned char domain_name[QMI_WDS_MAX_PROFILE_STR_SIZE]; }qmi_wds_domain_names; typedef struct { ipv6_addr_type ipv6_addr; int ipv6_prefix_len; }qmi_ipv6_addr_type; typedef struct { ipv4_addr_type ipv4_addr; int subnet_mask; }qmi_ipv4_addr_type; typedef struct { unsigned short mcc; unsigned short mnc; unsigned char mnc_includes_pcs_digit; /* TRUE or FALSE */ unsigned char app_specific_info_len; unsigned char app_specific_info[QMI_WDS_MAX_APP_SPECIFIC_INFO_LEN]; unsigned short container_id; } qmi_wds_operator_reserved_pco_type; /* Run-time settings information */ typedef struct { /* bit mask which indicates which of the below fields ** contain valid values. Use above QMI_WDS_CALL_SETTINGS mask values */ unsigned long mask; /* All values are optional, and their validity ** is indicated by set bit in param_mask */ ipv4_addr_type ipv4_addr; ipv4_addr_type primary_dns_ipv4_addr; ipv4_addr_type secondary_dns_ipv4_addr; ipv4_addr_type ipv4_gateway_addr; ipv4_addr_type ipv4_subnet_mask; unsigned char p_cscf_addr_using_pco; struct { unsigned char num_instances; ipv4_addr_type p_cscf_ipv4_addr[QMI_WDS_MAX_P_CSCF_IPV4_ADDRS]; }p_cscf_ipv4_addrs; struct { unsigned char num_instances; ipv6_addr_type p_cscf_ipv6_addr[QMI_WDS_MAX_P_CSCF_IPV6_ADDRS]; }p_cscf_ipv6_addrs; struct { unsigned char num_instances; qmi_wds_fqdn_strings fqdn_strings[QMI_WDS_MAX_FQDN_STRINGS]; }fqdn_list; qmi_ipv6_addr_type ipv6_addr_info; qmi_ipv6_addr_type ipv6_gateway_addr_info; ipv6_addr_type primary_dns_ipv6_addr; ipv6_addr_type secondary_dns_ipv6_addr; unsigned long mtu; struct { unsigned char num_instances; qmi_wds_domain_names domain_names[QMI_WDS_MAX_DOMAIN_NAMES]; }domain_name_list; qmi_wds_ip_family ip_family; qmi_wds_cn_flag_true_false im_cn_flag; qmi_wds_iface_name_type curr_technology; qmi_wds_operator_reserved_pco_type operator_pco; } qmi_wds_curr_call_info_type; /************************************************************************ * Definitions associated with QMI_WDS_GET_CURRENT_SESSION_SETTINGS ************************************************************************/ #define QMI_WDS_REQ_INTERNAL_SETTINGS_PARAM 0x00000001 #define QMI_WDS_REQ_SESSION_TIMER_SELECT_PARAM 0x00000002 #define QMI_WDS_REQ_SDB_FLAGS_PARAM 0x00000004 /* Parameter structure for requesting current runtime settings*/ typedef enum { SESSION_TIMER_DO = 0x01, SESSION_TIMER_1X = 0x02, SESSION_TIMER_1X_AND_DO = 0x03 }qmi_wds_session_timer_select; typedef enum { QMI_MSG_EXPEDITE = 0x00000001, QMI_MSG_FAST_EXPEDITE = 0x00000002 }qmi_wds_req_sdb_flags; #define QMI_WDS_RUNTIME_SETTINGS_RF_CONDITIONS_REQ_PARAM (1<<0) //0x00000001 #define QMI_WDS_RUNTIME_SETTINGS_DORM_TIMER_1X_REQ_PARAM (1<<1) //0x00000002 #define QMI_WDS_RUNTIME_SETTINGS_SESSION_TIMER_1X_REQ_PARAM (1<<2) //0x00000004 #define QMI_WDS_RUNTIME_SETTINGS_HANDDOWN_OPT_HDR_1X_REQ_PARAM (1<<3) //0x00000008 #define QMI_WDS_RUNTIME_SETTINGS_HYSTERISIS_ACT_TIMER_REQ_PARAM (1<<4) //0x00000010 #define QMI_WDS_RUNTIME_SETTINGS_HDR_EIDLE_SLOTTED_MODE_OPT_REQ_PARAM (1<<5) //0x00000020 #define QMI_WDS_RUNTIME_SETTINGS_SDB_SUPPORT_REQ_PARAM (1<<6) //0x00000040 typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned long params_mask; unsigned long req_internal_settings; qmi_wds_session_timer_select timer_info; qmi_wds_req_sdb_flags sdb_flags; }qmi_wds_internal_runtime_setings_params_type; typedef struct { unsigned char bit_number; int dss_errno; }qmi_wds_operation_failure_param_type; typedef enum { HDR_OPTION_TRUE = 0x00, HDR_OPTION_FALSE = 0x01 }qmi_wds_hdr_handdown_option_1x; typedef enum { SDB_SUPPORT_TRUE = 0x00, SDB_SUPPORT_FALSE = 0x01 }qmi_wds_sdb_support; /*MASK defines for both get and set internal runtime settings*/ #define QMI_WDS_RUNTIME_SETTINGS_RSP_OP_FAILURE 0x00000001 #define QMI_WDS_RUNTIME_SETTINGS_DORM_TIMER_1X 0x00000002 #define QMI_WDS_RUNTIME_SETTINGS_SESSION_TIMER_1X 0x00000004 #define QMI_WDS_RUNTIME_SETTINGS_HANDDOWN_OPT_HDR_1X 0x00000008 #define QMI_WDS_RUNTIME_SETTINGS_HYSTERISIS_ACT_TIMER 0x00000010 #define QMI_WDS_RUNTIME_SETTINGS_SDB_SUPPORT 0x00000020 #define QMI_WDS_RUNTIME_SETTINGS_RF_CONDITIONS 0x00000040 #define QMI_WDS_RUNTIME_SETTINGS_HDR_EIDLE_SLOTTED_MODE_OPT 0x00000080 typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned long params_mask; struct { unsigned char num_instances; qmi_wds_operation_failure_param_type failure_info[QMI_WDS_MAX_ERR_CODES_IN_RSP]; }op_failure_info; unsigned long dorm_timer_for_1x; int session_timer_for_1x; qmi_wds_hdr_handdown_option_1x hdr_handdown_option; unsigned long hysteresis_activation_timer; qmi_wds_sdb_support sdb_support; struct { qmi_wds_data_bearer_type current_db_nw; qmi_wds_db_rat_mask rat_mask; qmi_wds_db_so_mask db_so_mask; qmi_wds_rf_conditions rf_conditions; }rf_conditions; unsigned long hdr_eidle_slot_cycle_value; }qmi_wds_internal_runtime_settings_rsp_type; /************************************************************************ * Definitions associated with QMI_WDS_SET_INTERNAL_RUNTIME_SETTINGS ************************************************************************/ #define QMI_WDS_SET_INTERNAL_RUNTIME_1X_DORM_TIMER_PARAM 0x00000001 #define QMI_WDS_SET_INTERNAL_RUNTIME_1X_SESSION_TIMER_PARAM 0x00000002 #define QMI_WDS_SET_INTERNAL_RUNTIME_HDR_1X_HANDDOWN_OPT_PARAM 0x00000004 #define QMI_WDS_SET_INTERNAL_RUNTIME_HYSTERISIS_ACTIVATION_TIMER_PARAM 0x00000008 #define QMI_WDS_SET_INTERNAL_RUNTIME_ENABLE_HOLDDOWN_PARAM 0x00000010 #define QMI_WDS_SET_INTERNAL_RUNTIME_ENABLE_HDR_HPT_MODE_PARAM 0x00000020 #define QMI_WDS_SET_INTERNAL_RUNTIME_ENABLE_REV0_RATE_INERTIA_PARAM 0x00000040 #define QMI_WDS_SET_INTERNAL_RUNTIME_HDR_SLOTTED_MODE_PARAM 0x00000080 typedef enum { DISABLE = 0x00, ENABLE = 0x01 }qmi_wds_enable_disable; typedef qmi_wds_enable_disable qmi_wds_enable_holdown; typedef qmi_wds_enable_holdown qmi_wds_enable_hdr_hpt_mode; typedef qmi_wds_enable_holdown qmi_wds_enable_hdr_rev0_rate_inertia; typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned long params_mask; qmi_wds_enable_holdown holddown_enable; unsigned long dorm_timer_for_1x; struct { qmi_wds_session_timer_select timer_select; int timer_value; }session_timer_1x; qmi_wds_hdr_handdown_option_1x hdr_handdown_option; unsigned long hysteresis_activation_timer; qmi_wds_enable_hdr_hpt_mode hdr_htp_mode_enable; qmi_wds_enable_hdr_rev0_rate_inertia hdr_rev0_rate_inertia_enable; unsigned long slot_cycle_value; }qmi_wds_set_internal_runtime_settings_params_type; /*TODO: duplicating this again, discuss*/ typedef struct { unsigned char tlv_type; int dss_errno; }qmi_wds_operation_failure; typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned long params_mask; struct { unsigned char num_failures; qmi_wds_operation_failure op_failure[QMI_WDS_MAX_ERR_CODES_IN_RSP]; }op_failures; }qmi_wds_set_internal_runtime_settings_rsp_type; /************************************************************************ * Definitions associated with QMI_WDS_MT_DEREG_CB_REQ * and MT_CALL_REG_INDICATIONS ************************************************************************/ #define QMI_WDS_MT_REG_CB_IP_FAMILY_PARAM 0x00000001 #define QMI_WDS_MT_REG_CB_PROFILE_INDEX_PARAM 0x00000002 #define QMI_WDS_MT_REG_CB_TECH_PREF_PARAM 0x00000004 /*req */ typedef struct { unsigned long params_mask; qmi_ip_family_pref_type ip_family; unsigned char profile_index; qmi_wds_iface_name_type xtended_tech_pref; }qmi_wds_reg_mob_term_call_req_params; /*resp */ typedef int qmi_wds_dss_errno; typedef unsigned long mob_terminated_packet_handle; typedef struct { mob_terminated_packet_handle pkt_hndl; qmi_wds_dss_errno dss_errno; }qmi_wds_reg_mob_terminated_call_rsp_type; /*DE REGISTER RSP DATA TYPE*/ #define QMI_WDS_EXTENDED_ERROR_INFO_PARAM 0x0001 typedef struct { unsigned short param_mask; qmi_wds_dss_errno dss_errno; }qmi_wds_dss_errno_type; typedef qmi_wds_dss_errno_type qmi_wds_de_reg_mob_terminated_call_rsp_type; typedef qmi_wds_dss_errno_type qmi_wds_bcmcs_db_updt_rsp_type; typedef qmi_wds_dss_errno_type qmi_wds_initiate_mcast_reg_ex_rsp_type; typedef qmi_wds_dss_errno_type qmi_wds_bcmcs_enable_handoff_reg_rsp_type; typedef qmi_wds_dss_errno_type qmi_wds_bcmcs_bom_caching_setup_rsp_type; typedef qmi_wds_dss_errno_type qmi_wds_initiate_mcast_leave_ex_rsp_type; /************************************************************************ * Definitions associated with qmi_wds_bcmcs_db_update_req ************************************************************************/ typedef enum { ZONE_1x = 0x00, ZONE_HDR = 0x01 }qmi_wds_dsbcmcs_zone_type; typedef qmi_wds_ip_family multicast_ip_family; typedef enum { FRAMING_SEGMENT = 0x00, FRAMING_HDLC = 0x01 }qmi_wds_bcmcs_framing_type; typedef enum { BCMCS_PPP = 0x00, BCMCS_IPV4 = 0x01, BCMCS_IPV6 = 0x02 }qmi_wds_bcmcs_protocol_type; typedef enum { BCMCS_OVERWRITE = 0x00, BCMCS_DONT_OVERWRITE = 0x01 }qmi_wds_bcmcs_overwrite; typedef union { ipv4_addr_type ipv4; ipv6_addr_type ipv6; }qmi_wds_ipv4_ipv6_addr_type; typedef struct { qmi_wds_dsbcmcs_zone_type zone_type; unsigned char subnet_hdr[16]; multicast_ip_family ip_family; qmi_wds_ipv4_ipv6_addr_type ip_addr; unsigned long prog_id; unsigned char prog_id_len; unsigned char flow_discrim_len; unsigned char flow_discrim; unsigned short port; qmi_wds_bcmcs_framing_type frame_type; qmi_wds_bcmcs_protocol_type protocol_type; unsigned char crc_length; unsigned char flow_format; unsigned long flow_id; qmi_wds_bcmcs_overwrite overwrite; unsigned char flow_priority; }qmi_wds_bcmcs_db_updt_params_type; /************************************************************************ * Definitions associated with qmi_wds_bcmcs_enbl_handoff_reg_req ************************************************************************/ typedef struct { multicast_ip_family ip_family; qmi_wds_ipv4_ipv6_addr_type ip_addr; unsigned short mcast_port; }qmi_wds_mcast_ip_port_info; typedef struct { unsigned char num_mcast_addr; /*value cannot be more than 25 */ qmi_wds_mcast_ip_port_info ip_info[QMI_WDS_MAX_MCAST_ADDRS]; }qmi_wds_bcmcs_handoff_optimization_info; /************************************************************************ * Definitions associated with qmi_wds_bcmcs_bom_caching_setup_req ************************************************************************/ typedef enum { BOM_ENABLE = 0x00, BOM_DISABLE = 0x01 }qmi_wds_enbl_dsbl_bom; typedef struct { qmi_wds_enbl_dsbl_bom bom_enbl_dsbl; unsigned char bom_cache_timeout; }qmi_wds_bom_caching_setup_req_param_type; /************************************************************************ * Definitions associated with QMI_WDS_INITIATE_MCAST_JOIN_EX * (bundled multicast ip addr's version) ************************************************************************/ /* Req Related */ typedef enum { MCAST_REG_SETUP_ALLOWED = 0x00000000, MCAST_REG_SETUP_NOT_ALLOWED = 0x00000001 }qmi_wds_mcast_req_config_flag; typedef struct { qmi_wds_mcast_ip_port_info mcast_ip_info; qmi_wds_mcast_req_config_flag config_flag; }qmi_wds_mcast_ip_port_config_info; typedef struct { unsigned char num_flows; qmi_wds_mcast_ip_port_config_info ip_info[QMI_WDS_MAX_MCAST_ADDRS];/*TODO:Max instances ? FIND OUT*/ }qmi_wds_mcast_join_req_params_type; /* Rsp Related */ typedef struct { unsigned char num_handles; unsigned long mcast_handle_list[QMI_WDS_MAX_MCAST_HNDLS]; }qmi_wds_mcast_hndl_list_type; typedef struct { qmi_wds_mcast_hndl_list_type hndl_list; qmi_wds_dss_errno_type dss_errno; }qmi_wds_initiate_mcast_join_ex_rsp_type; /************************************************************************ * Definitions associated with QMI_WDS_INITIATE_MCAST_JOIN ************************************************************************/ #define QMI_WDS_MCAST_JOIN_IPV4_ADDR_INFO_PARAM 0x00000001 #define QMI_WDS_MCAST_JOIN_MBMS_SPECIFIC_JOIN_INFO_PARAM 0x00000002 typedef enum { BROADCAST_SERVICE_METHOD = 0x00, MULTICAST_SERVICE_METHOD = 0x01 }qmi_wds_mbms_service_method; typedef enum { STREAMING_SERVICE_TYPE = 0x00, DOWNLOAD_SERVICE_TYPE = 0x01 }qmi_wds_mbms_service_type; typedef struct { unsigned long params_mask; struct { unsigned long mcast_ip_addr; unsigned short mcast_port; }mcast_ip_addr_info; struct { unsigned char tmgi[8];//What is this ? unsigned char session_start_timer[8]; unsigned char session_end_timer[8]; int priority; qmi_wds_mbms_service_method service_method; qmi_wds_mbms_service_type service_type; qmi_wds_bool_type selected_service; qmi_wds_bool_type service_security; }mbms_specific_join_info; }qmi_wds_mcast_ipv4_join_info_param_type; /*resp*/ typedef unsigned long qmi_wds_mcast_hndl_rsp_type; /*MCAST LEAVE*/ typedef unsigned long qmi_wds_mcast_hndl_param_type; /************************************************************************ * Definitions associated with qmi_wds_initiate_mbms_context_activate ************************************************************************/ /* Req Related */ #define QMI_WDS_IPV4_CONTEXT_ACTIVATION_INFO_PARAM 0x00000001 typedef struct { unsigned long param_mask; struct { ipv4_addr_type multicast_ip_addr;/*Addr to join Mcast*/ unsigned char profile_id; }ipv4_context_activate_info; }qmi_wds_mbms_context_req_params_type; /*Resp Related*/ typedef unsigned long qmi_wds_mbms_context_handle; /************************************************************************ * Definitions associated with qmi_wds_get_profile_list() ************************************************************************/ typedef struct { qmi_wds_profile_tech_type profile_type; unsigned long profile_index; char profile_name[QMI_WDS_MAX_PROFILE_STR_SIZE]; } qmi_wds_profile_list_type; /************************************************************************ * Definitions associated with asyncronous indications ************************************************************************/ typedef enum { QMI_WDS_PACKET_DATA_DISCONNECTED = 0x01, QMI_WDS_PACKET_DATA_CONNECTED = 0x02, QMI_WDS_PACKET_DATA_SUSPENDED = 0x03, QMI_WDS_PACKET_DATA_AUTHENTICATING = 0x04 } qmi_wds_link_status_type; #define QMI_WDS_PKT_SRVC_IND_CALL_END_REASON 0x0001 #define QMI_WDS_PKT_SRVC_IND_IP_FAMILY 0x0002 #define QMI_WDS_PKT_SRVC_IND_TECH_NAME 0x0004 #define QMI_WDS_PKT_SRVC_IND_XLAT_CAP 0x0008 typedef struct { unsigned short param_mask; //mask to denote validity of call_end_reason; qmi_wds_link_status_type link_status; unsigned char reconfig_required; /* TRUE if reconfig required, FALSE otherwise */ qmi_wds_call_end_reason_type call_end_reason; qmi_ip_family_pref_type ip_family; qmi_wds_iface_name_type tech_name; unsigned char xlat_capable; } qmi_wds_pkt_srvc_status_type; /************************************************************************ * Definitions associated with WDS HANDOFF Indications ************************************************************************/ typedef enum { QMI_WDS_HANDOFF_INIT = 0, QMI_WDS_HANDOFF_SUCCESS = 1, QMI_WDS_HANDOFF_FAILURE = 2 } qmi_wds_handoff_info_ind_type; typedef struct { qmi_wds_handoff_info_ind_type handoff_info_status; qmi_wds_bearer_tech_rat_mask_ex source_rat; qmi_wds_bearer_tech_rat_mask_ex target_rat; } qmi_wds_handoff_info_type; /************************************************************************ * Definitions associated with EMBMS TMGI ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_SIZE 6 #define QMI_WDS_EMBMS_TMGI_STATUS_IND_LIST_SIZE 1 typedef struct { unsigned char tmgi[QMI_WDS_EMBMS_TMGI_SIZE]; unsigned char session_id_valid; unsigned char session_id; }qmi_wds_embms_tmgi_type; #define TMGI_TYPE_SIZE 8 /* this value is calculated from qmi_wds_embms_tmgi_type need to be updated if structure changes */ /************************************************************************ * Definitions associated with TMGI Status indications ************************************************************************/ typedef enum { QMI_WDS_EMBMS_TMGI_ACTIVATE_SUCCESS = 0x00000000, QMI_WDS_EMBMS_TMGI_ACTIVATE_SUCCESS_DUP_ACTIVATE = 0x00000001, QMI_WDS_EMBMS_TMGI_ACTIVATE_SUCCESS_IDLE_RADIO_TUNE = 0x00000002, QMI_WDS_EMBMS_TMGI_ACTIVATE_SUCCESS_CONN_RADIO_TUNE = 0x00000003, /* Begin - deprecated from rev 1.49 onwards */ QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_RADIO_CONFIG = 0x00010000, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_CHANNEL_UNAVAILABLE = 0x00010001, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_EMBMS_NOT_ENABLED = 0x00010002, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_OUT_OF_COVERAGE = 0x00010003, /* End - deprecated from rev 1.49 onwards */ QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_UNKNOWN = 0x00010004, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_NOT_ALLOWED = 0x00010005, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_MISSING_CTL_INFO = 0x00010006, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_MISSING_TMGI = 0x00010007, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_MCAST_OOS = 0x00010008, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_UNICAST_OOS = 0x00010009, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_CAMP_ON_OTHER_FREQ = 0x0001000A, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_SAI_MISMATCH = 0x00010107, QMI_WDS_EMBMS_TMGI_ACTIVATION_FAIL_MAX_TMGI_ALREADY_ACTIVE = 0x00010108, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_ACTIVATIOIN_IN_PROGRESS = 0x0000006F, QMI_WDS_EMBMS_TMGI_ACTIVATE_FAIL_DEACTIVATION_IN_PROGRESS = 0x000000CB }qmi_wds_embms_tmgi_activate_status_type; typedef enum { QMI_WDS_EMBMS_TMGI_DEACTIVATE_SUCCESS = 0x00000000, QMI_WDS_EMBMS_TMGI_DEACTIVATE_FAIL_NOT_ACTIVATED_CTRL_POINT = 0x0000006C, QMI_WDS_EMBMS_TMGI_DEACTIVATE_FAIL_NOT_ACTIVATED = 0x0000007C, QMI_WDS_EMBMS_TMGI_DEACTIVATE_FAIL_DEACTIVATION_IN_PROGRESS = 0x000000CB }qmi_wds_embms_tmgi_deactivate_status_type; typedef struct { unsigned char tmgi_list_len; qmi_wds_embms_tmgi_type *tmgi_list_ptr; }qmi_wds_embms_tmgi_info_type; /************************************************************************ * Definitions associated with TMGI Activate Status indications ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_ACTIVATE_STATUS_IND_TRANX_ID_PARAM 0x01 typedef struct { unsigned short param_mask; qmi_wds_embms_tmgi_activate_status_type activate_status; qmi_wds_embms_tmgi_info_type activation_tmgi; int dbg_trace_id; }qmi_wds_embms_tmgi_activate_status_ind_type; /************************************************************************ * Definitions associated with TMGI Deactivate Status indications ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_DEACTIVATE_STATUS_IND_TRANX_ID_PARAM 0x01 typedef struct { unsigned short param_mask; qmi_wds_embms_tmgi_deactivate_status_type deactivate_status; qmi_wds_embms_tmgi_info_type deactivation_tmgi; int dbg_trace_id; }qmi_wds_embms_tmgi_deactivate_status_ind_type; /************************************************************************ * Definitions associated with TMGI Activate_Deactivate Status indications ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_ACT_DEACT_STATUS_IND_TRANX_ID_PARAM 0x01 typedef struct { unsigned short param_mask; qmi_wds_embms_tmgi_activate_status_type activate_status; qmi_wds_embms_tmgi_info_type activation_tmgi; qmi_wds_embms_tmgi_deactivate_status_type deactivate_status; qmi_wds_embms_tmgi_info_type deactivation_tmgi; int dbg_trace_id; }qmi_wds_embms_tmgi_act_deactivate_status_ind_type; /************************************************************************ * Definitions associated with TMGI list indications ************************************************************************/ #define QMI_WDS_EMBMS_LIST_IND_TMGI_LIST_PARAM_MASK 0x01 #define QMI_WDS_EMBMS_LIST_IND_OOS_WARNING_PARAM_MASK 0x02 #define QMI_WDS_EMBMS_LIST_IND_TRANX_ID_PARAM_MASK 0x04 typedef enum { QMI_WDS_EMBMS_TMGI_LIST_INVALID = 0xFF, QMI_WDS_EMBMS_TMGI_LIST_ACTIVE = 0x00, QMI_WDS_EMBMS_TMGI_LIST_AVAILABLE = 0x01, QMI_WDS_EMBMS_TMGI_LIST_OOS_WARNING = 0x02 }qmi_wds_embms_tmgi_list_type; typedef int qmi_wds_embms_oos_warning_type; typedef struct { unsigned short param_mask; qmi_wds_embms_tmgi_list_type list_type; qmi_wds_embms_tmgi_info_type tmgi_list; /* Out of Service warning reason codes*/ qmi_wds_embms_oos_warning_type oos_warning_reason; int dbg_trace_id; }qmi_wds_embms_tmgi_list_ind_type; /************************************************************************ * Definitions associated with EMBMS Content desc control indications ************************************************************************/ #define QMI_WDS_EMBMS_CONTENT_DESC_CTRL_IND_TRANX_ID_PARAM_MASK 0x01 #define QMI_WDS_EMBMS_CONTENT_DESC_CTRL_IND_CONTENT_CTRL_PARAM_MASK 0x02 #define QMI_WDS_EMBMS_CONTENT_DESC_CTRL_IND_STATUS_CTRL_PARAM_MASK 0x04 typedef enum { QMI_WDS_EMBMS_CC_DISABLE = 0x00000000, QMI_WDS_EMBMS_CC_ENABLE_START_OBJ = 0x00000001, QMI_WDS_EMBMS_CC_ENABLE_START_VIDEO_OBJ = 0x00000002, }qmi_wds_embms_content_control_type; typedef enum { QMI_WDS_EMBMS_SU_DISABLE = 0x00000000, QMI_WDS_EMBMS_SU_ENABLE_OBJ = 0x00000001, QMI_WDS_EMBMS_SU_ENABLE_VIDEO_OBJ = 0x00000002, }qmi_wds_embms_status_control_type; typedef struct { unsigned short param_mask; qmi_wds_embms_tmgi_info_type content_desc_tmgi; qmi_wds_embms_content_control_type content_control; qmi_wds_embms_status_control_type status_control; int dbg_trace_id; }qmi_wds_embms_content_desc_control_ind_type; /************************************************************************ * Definitions associated with reverse adapter indications ************************************************************************/ #define QMI_WDS_REV_IP_TRANS_IND_TECH_NAME_PARAM_MASK 0x0001 #define QMI_WDS_REV_IP_TRANS_IND_SA_CONFIG_SHARED_PARAM_MASK 0x0002 #define QMI_WDS_REV_IP_TRANS_IND_IPV4_ADDR_PARAM_MASK 0x0004 #define QMI_WDS_REV_IP_TRANS_IND_IPV4_SUBNET_MASK_PARAM_MASK 0x0008 #define QMI_WDS_REV_IP_TRANS_IND_IPV6_ADDR_PARAM_MASK 0x0010 typedef enum { QMI_WDS_REV_IP_TRANS_CONN_STATUS_INVALID = -1, QMI_WDS_REV_IP_TRANS_CONN_STATUS_DISCONNECTED, QMI_WDS_REV_IP_TRANS_CONN_STATUS_CONNECTED } qmi_wds_rev_ip_trans_conn_status_type; typedef unsigned long qmi_wds_txn_id_type; typedef struct { /* Mandatory parameters */ qmi_wds_rev_ip_trans_conn_status_type conn_status; qmi_wds_txn_id_type txn_id; unsigned short param_mask; /* Optional parameters */ /* Valid if QMI_WDS_REV_IP_TRANS_IND_TECH_NAME_PARAM_MASK is set in param_mask */ qmi_wds_iface_name_type tech_name; /* Valid if QMI_WDS_REV_IP_TRANS_IND_SA_CONFIG_SHARED_PARAM_MASK is set in param_mask */ unsigned char is_sa_shared; /* Valid if QMI_WDS_REV_IP_TRANS_IND_IPV4_ADDR_PARAM_MASK is set in param_mask */ ipv4_addr_type ipv4_addr; /* Valid if QMI_WDS_REV_IP_TRANS_IND_IPV4_SUBNET_MASK_PARAM_MASK is set in param_mask */ ipv4_addr_type ipv4_subnet_mask; /* Valid if QMI_WDS_REV_IP_TRANS_IND_IPV6_ADDR_PARAM_MASK is set in param_mask */ qmi_ipv6_addr_type ipv6_addr_info; } qmi_wds_rev_ip_trans_ind_type; /************************************************************************ * Definitions associated with SAI list indications ************************************************************************/ #define QMI_WDS_EMBMS_FREQ_MAX_SIZE 9 /* max number of frequency bands */ #define QMI_WDS_EMBMS_SAI_PER_FREQ_MAX_SIZE 64 /* max number of SAIs in each frequency */ #define QMI_WDS_EMBMS_SAI_MAX_SIZE (QMI_WDS_EMBMS_FREQ_MAX_SIZE * QMI_WDS_EMBMS_SAI_PER_FREQ_MAX_SIZE) /* max number of ALL SAIs */ #define QMI_WDS_EMBMS_LIST_IND_SAI_LIST_PARAM_MASK 0x01 #define QMI_WDS_EMBMS_LIST_IND_SAI_LIST_TRANX_ID_PARAM_MASK 0x02 typedef struct { unsigned short param_mask; unsigned short camped_sai_list_len; unsigned int *camped_sai_list; unsigned short available_sai_list_len; unsigned int *available_sai_list; unsigned short num_sai_per_group_len; unsigned short *num_sai_per_group; int dbg_trace_id; }qmi_wds_embms_sai_list_ind_type; /************************************************************************ * Definitions associated with TMGI activate req ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_EARFCNLIST_SIZE 32 /* max size of earfcnlist array same value as EARFCNLIST_MAX_V01 in qmi_embms_v01.h */ #define QMI_WDS_EMBMS_TMGI_ACTIVATE_TRANX_ID_PARAM 0x0001 #define QMI_WDS_EMBMS_TMGI_ACTIVATE_PREEMPT_PRIORITY_PARAM 0x0002 #define QMI_WDS_EMBMS_TMGI_ACTIVATE_EARFCNLIST_PARAM 0x0004 #define QMI_WDS_EMBMS_TMGI_ACTIVATE_SAILIST_PARAM 0x0008 typedef struct { unsigned short param_mask; unsigned long preempt_priority; unsigned char earfcn_list_len; unsigned int *earfcn_list; unsigned char sai_list_len; unsigned int *sai_list; unsigned char tmgi_list_len; qmi_wds_embms_tmgi_type *tmgi_list; qmi_wds_embms_tmgi_type *deactivate_tmgi_list; qmi_wds_embms_tmgi_activate_status_type activate_status; qmi_wds_embms_tmgi_deactivate_status_type deactivate_status; int dbg_trace_id; }qmi_wds_embms_actdeact_tmgi_info_type; /************************************************************************ * Definitions associated with TMGI deactivate req ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_DEACTIVATE_TRANX_ID_PARAM 0x0001 /************************************************************************ * Definitions associated with TMGI activate_deactivate req ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_ACT_DEACT_TRANX_ID_PARAM 0x0001 #define QMI_WDS_EMBMS_TMGI_ACT_DEACT_PREEMPT_PRIORITY_PARAM 0x0002 #define QMI_WDS_EMBMS_TMGI_ACT_DEACT_EARFCNLIST_PARAM 0x0004 #define QMI_WDS_EMBMS_TMGI_ACT_DEACT_SAILIST_PARAM 0x0008 /************************************************************************ * Definitions associated with TMGI list query req/resp ************************************************************************/ #define QMI_WDS_EMBMS_LIST_QUERY_REQ_TRANX_ID_PARAM_MASK 0x0001 #define QMI_WDS_EMBMS_LIST_QUERY_RESP_TMGI_LIST_PARAM_MASK 0x0001 /************************************************************************ * Definitions associated with EMBMS content desc update req ************************************************************************/ #define QMI_WDS_EMBMS_CONTENT_PARAM_NUM_SIZE 64 /* max size of content param array same value as CONTENT_PARAM_NUM_MAX_V01 in qmi_embms_v01.h */ typedef struct { int param_code; int param_value; }embms_content_desc_type; typedef struct { unsigned int content_desc_len; embms_content_desc_type *content_desc_ptr; }embms_content_desc_info_type; typedef struct { unsigned char tmgi_list_len; qmi_wds_embms_tmgi_type *tmgi_list; embms_content_desc_info_type content_desc; int dbg_trace_id; }qmi_wds_embms_content_desc_update_info_type; /* The following structure is also used for qmi_wds_get_current_bearer_tech()*/ typedef struct { qmi_wds_data_bearer_type current_db_nw; qmi_wds_db_rat_mask rat_mask; qmi_wds_db_so_mask db_so_mask; } qmi_wds_data_bearer_tech_type; typedef struct { qmi_wds_data_bearer_type_ex technology; qmi_wds_bearer_tech_rat_mask_ex rat_mask; qmi_wds_bearer_tech_so_mask_ex so_mask; } qmi_wds_data_bearer_tech_type_ex; /* Event report indication definitions */ /* Following bitmasks are used for event report data_capabilities field */ /* Following are for data_capabilities[0] */ #define QMI_WDS_EVENT_REPORT_DATA_CAPABILITY_0_FMC 0x00000001 #define QMI_WDS_EVENT_REPORT_DATA_CAPABILITY_0_CDMA_1X 0x00000002 #define QMI_WDS_EVENT_REPORT_DATA_CAPABILITY_0_EVDO_REV_0 0x00000004 #define QMI_WDS_EVENT_REPORT_DATA_CAPABILITY_0_EVDO_REV_A 0x00000008 #define QMI_WDS_EVENT_REPORT_DATA_CAPABILITY_0_EVDO_REV_B 0x00000010 #define QMI_WDS_EVENT_REPORT_DATA_CAPABILITY_0_NULL_BEARER 0x00000020 /* Following are for data_capabilities[1] (none defined yet) */ typedef enum { QMI_WDS_DORM_STATUS_DORMANT = 1, QMI_WDS_DORM_STATUS_ACTIVE = 2 } qmi_wds_dorm_status_type; typedef enum { QMI_WDS_DATA_CALL_ACTIVATED = 1, QMI_WDS_DATA_CALL_TERMINATED = 2 } qmi_wds_data_call_status_type; typedef enum { QMI_WDS_DATA_SYS_UNKNOWN = 0, QMI_WDS_DATA_SYS_CDMA_1X = 1, QMI_WDS_DATA_SYS_EVDO = 2, QMI_WDS_DATA_SYS_GPRS = 3, QMI_WDS_DATA_SYS_WCDMA = 4, QMI_WDS_DATA_SYS_LTE = 5, QMI_WDS_DATA_SYS_TDSCDMA = 6 } qmi_wds_pref_data_sys_type; typedef enum { QMI_WDS_DATA_CALL_TYPE_INVALID = 0, QMI_WDS_DATA_CALL_TYPE_EMBEDDED = 1, QMI_WDS_DATA_CALL_TYPE_TETHERED = 2 } qmi_wds_data_call_type_type; typedef enum { QMI_WDS_TETHERED_CALL_TYPE_INVALID = 0, QMI_WDS_TETHERED_CALL_TYPE_RMNET = 1, QMI_WDS_TETHERED_CALL_TYPE_DUN = 2 } qmi_wds_tethered_call_type_type; /* QMI_WDS_EVENT_DATA_SYS_STATUS_IND related defines */ typedef enum { QMI_WDS_DATA_NETWORK_TYPE_INVALID = -1, QMI_WDS_DATA_NETWORK_TYPE_3GPP = 0, QMI_WDS_DATA_NETWORK_TYPE_3GPP2 = 1 } qmi_wds_data_network_type; typedef struct { qmi_wds_data_network_type network; qmi_wds_db_rat_mask rat_mask; qmi_wds_db_so_mask db_so_mask; } qmi_wds_data_sys_status_network_info_type; typedef struct { qmi_wds_data_network_type pref_network; qmi_wds_data_sys_status_network_info_type *network_info; unsigned int network_info_len; } qmi_wds_data_sys_status_type; /* Event reporting indication structure definition */ typedef struct { /* Bitmask that inicates which of the following event fields contain valid ** data. One or more of QMI_WDS_EVENT_CHAN_RATE_IND, ** QMI_WDS_EVENT_XFER_STATS_IND, QMI_WDS_EVENT_BEARER_TECH_IND ** and QMI_WDS_EVENT_DORM_STATUS_IND */ unsigned long event_mask; /* If QMI_WDS_EVENT_CHAN_RATE_IND is set in event_mask */ struct { unsigned long tx_curr_channel_rate; unsigned long rx_curr_channel_rate; } chan_rate; /* If QMI_WDS_EVENT_XFER_STATS_IND is set in event_mask */ struct { /* Bitmask that indicates which of the following fields are valid. ** One or more of QMI_WDS_XFER_STATS_TX_PKTS_GOOD, ** QMI_WDS_XFER_STATS_RX_PKTS_GOOD, etc. */ unsigned long mask; unsigned long tx_good_pkt_cnt; unsigned long rx_good_pkt_cnt; unsigned long tx_err_pkt_cnt; unsigned long rx_err_pkt_cnt; unsigned long tx_overflow_cnt; unsigned long rx_overflow_cnt; uint64_t tx_good_byte_cnt; uint64_t rx_good_byte_cnt; unsigned long tx_pkts_dropped; unsigned long rx_pkts_dropped; } xfer_stats; /* Valid if QMI_WDS_EVENT_BEARER_TECH_IND bit is set */ qmi_wds_data_bearer_tech_type data_bearer_tech_type; /* Valid if QMI_WDS_EVENT_BEARER_TECH_EX_IND bit is set */ qmi_wds_data_bearer_tech_type_ex data_bearer_tech_type_ex; /* If QMI_WDS_EVENT_DORM_STATUS_IND is set in event_mask */ qmi_wds_dorm_status_type dorm_status; /* 64-bits of data capabilities */ unsigned long data_capabilities[2]; /* IFACE name (reported when data capabilities are enabled) */ qmi_wds_iface_name_type iface_name; /* Valid if QMI_WDS_EVENT_DATA_CALL_STATUS_CHG_IND bit is set */ struct { qmi_wds_data_call_status_type data_call_status; qmi_wds_ip_family data_call_addr_family; }data_call_status_change; /* Valid if QMI_WDS_EVENT_PREF_DATA_SYS_IND bit is set */ qmi_wds_pref_data_sys_type pref_data_sys; /* Valid if QMI_WDS_EVENT_DATA_CALL_TYPE_IND bit is set */ struct { qmi_wds_data_call_type_type data_call_type; qmi_wds_tethered_call_type_type tethered_call_type; } data_call_type; /* Valid if QMI_WDS_EVENT_DATA_SYS_STATUS_IND bit is set */ qmi_wds_data_sys_status_type data_sys_status; } qmi_wds_event_report_type; /* Distinguishes indication message types */ typedef enum { QMI_WDS_SRVC_INVALID_IND_MSG, QMI_WDS_SRVC_PKT_SRVC_STATUS_IND_MSG, QMI_WDS_SRVC_EVENT_REPORT_IND_MSG, QMI_WDS_SRVC_INTERNAL_IFACE_EVNT_REG_MSG, QMI_WDS_SRVC_MT_REQUEST_IND_MSG, QMI_WDS_SRVC_MCAST_STATUS_IND_MSG, QMI_WDS_SRVC_MBMS_MCAST_CONTEXT_STATUS_IND_MSG, QMI_WDS_SRVC_DUN_CALL_INFO_IND_MSG, QMI_WDS_SRVC_EMBMS_TMGI_ACTIVATE_IND_MSG, QMI_WDS_SRVC_EMBMS_TMGI_DEACTIVATE_IND_MSG, QMI_WDS_SRVC_EMBMS_TMGI_ACT_DEACT_IND_MSG, QMI_WDS_SRVC_EMBMS_TMGI_LIST_IND_MSG, QMI_WDS_SRVC_LTE_ATTACH_PDN_LIST_IND_MSG, QMI_WDS_SRVC_EMBMS_SAI_LIST_IND_MSG, QMI_WDS_SRVC_REV_IP_TRANSPORT_IND_MSG, QMI_WDS_SRVC_HANDOFF_INFORMATION_IND_MSG, QMI_WDS_SRVC_EXT_IP_CONFIG_IND_MSG, QMI_WDS_SRVC_DATA_PATH_CHANGE_IND_MSG, QMI_WDS_SRVC_EMBMS_CONTENT_DESC_CONTROL_IND_MSG, } qmi_wds_indication_id_type; /*Mcast Status Related*/ #define QMI_WDS_MCAST_REASON_CODE_PARAM 0x00000001 typedef enum { QMI_WDS_MCAST_REGISTER_SUCCESS = 0x01, QMI_WDS_MCAST_REGISTER_FAILURE = 0x02, QMI_WDS_MCAST_DEREGISTERED = 0x03, QMI_WDS_MCAST_STATUS_EX = 0x04 } qmi_wds_mcast_status; typedef enum { IC_NOT_SPECIFIED = 0, /*bcmcs related*/ BCMCS_FLOW_STATUS_CANCELLED = 100, BCMCS_FLOW_STATUS_UNABLE_TO_MONITOR = 300, BCMCS_FLOW_STATUS_REQUESTED = 301, BCMCS_FLOW_STATUS_TIMEOUT = 302, BCMCS_FLOW_STATUS_LOST = 303, BCMCS_FLOW_STATUS_SYS_UNAVAILABLE = 304, BCMCS_FLOW_STATUS_AN_REJECT_NOT_AVAILABLE = 400, BCMCS_FLOW_STATUS_AN_REJECT_NOT_TRANSMITTED = 401, BCMCS_FLOW_STATUS_AN_REJECT_INVALID_AUTH_SIG = 402, BCMCS_FLOW_STATUS_UNAVAILABLE = 500, BCMCS_FLOW_STATUS_NO_MAPPING = 501, BCMCS_FLOW_STATUS_ID_NOT_FOUND_FOR_GIVEN_MULTICAST_IP = 502, BCMCS_MAX_FLOWS_REACHED = 503, BCMCS_MAX_DEPRECATED_INFO_CODE = 504, BCMCS_JOIN_REQ_IN_PROGRESS = 613, BCMCS_FLOW_REQUEST_SENT = 614, BCMCS_FLOW_STATUS_MAX_MONITORED_FLOWS = 615, BCMCS_FLOW_STATUS_MONITORED = 616, BCMCS_REGISTRATION_SUCCESS = 617, BCMCS_REGISTRATION_NOT_ALLOWED = 618, BCMCS_REGISTRATION_FAILED = 619, BCMCS_FLOW_DEREGISTERED = 620, /*bcmcs2po related*/ BCMCS2P0_FLOW_STATUS_CANCELLED = 600, BCMCS2P0_FLOW_STATUS_UNABLE_TO_MONITOR = 601, BCMCS2P0_FLOW_STATUS_TIMEOUT = 602, BCMCS2P0_FLOW_STATUS_LOST = 603, BCMCS2p0_FLOW_STATUS_SYS_UNAVAILABLE = 604, BCMCS2P0_FLOW_STATUS_UNAVAILABLE = 605, BCMCS2P0_FLOW_STATUS_AN_REJECT_NOT_AVAILABLE = 606, BCMCS2P0_FLOW_STATUS_AN_REJECT_NOT_TRANSMITTED = 607, BCMCS2P0_FLOW_STATUS_AN_REJECT_INVALID_AUTH_SIG = 608, BCMCS2P0_FLOW_STATUS_NO_MAPPING = 609, BCMCS2P0_FLOW_STATUS_ID_NOT_FOUND_FOR_GIVEN_MULTICAST_IP = 610, BCMCS2P0_FLOW_STATUS_REQUESTED = 611, BCMCS2P0_MAX_FLOWS_REACHED = 612, FLO_IP_OR_PORT_NOT_SUPPORTED = 1051, FLO_NO_AUTHORIZATION = 1052, FLO_NO_SYSTEM_COVERAGE = 1053, FLO_MAX_FLOW_REACHED = 1054, /*DVBH related*/ DVBH_IP_OR_PORT_NOT_FOUND = 1101, DVBH_SYSTEM_UNAVAILABLE = 1102, DVBH_BAD_REQUEST = 1103, DVBH_REQUEST_CONFLICT = 1104, DVBH_DUP_REQUEST = 1105, DVBH_MAX_FLOWS_REACHED = 1106 }qmi_wds_mcast_info_reason_code;/*No Description available, TODO: change name accordingly*/ typedef struct { unsigned long param_mask; struct { unsigned long mcast_handle; qmi_wds_mcast_status mcast_status; }multicast_status; qmi_wds_mcast_info_reason_code reason_code; }qmi_wds_mcast_status_ind_type; #define QMI_WDS_MBMS_MCAST_REASON_CODE_PARAM 0x00000001 typedef enum { MBMS_MCAST_CONTEXT_ACTIVATE_SUCCESS = 0x01, MBMS_MCAST_CONTEXT_ACTIVATE_FAILURE = 0x02, MBMS_MCAST_CONTEXT_DEACTIVATE_SUCCESS = 0x03, MBMS_MCAST_CONTEXT_DEACTIVATE_FAILURE = 0x04 }qmi_wds_mbms_mcast_status; typedef enum { MBMS_SYSTEM_UNAVAILABLE = 1151 }qmi_wds_mbms_mcast_reason_code; typedef struct { unsigned long param_mask; qmi_wds_mbms_mcast_status mcast_status; /*optional*/ qmi_wds_mbms_mcast_reason_code reason_code; }qmi_wds_mbms_mcast_context_status_type; typedef mob_terminated_packet_handle qmi_wds_mob_terminated_packet_handle; /************************************************************************ * Definitions associated with qmi_wds_get_dun_call_info and * corresponding indication ************************************************************************/ /* Bit definitions for curr_info_mask fields ** below. More will be added later */ #define QMI_WDS_DUN_CURR_CONN_STATUS 0x00000001 #define QMI_WDS_DUN_CURR_TX_RX_BYTE_COUNT 0x00000004 /* Bit definitions for ind_info_mask fields ** below. More will be added later */ #define QMI_WDS_DUN_CALL_INFO_CONN_STATUS_IND_PARAM_MASK 0x00000001 #define QMI_WDS_DUN_CALL_INFO_TX_RX_STATS_IND_PARAM_MASK 0x00000002 #define QMI_WDS_DUN_IND_TX_STATS_MASK 0x00000040 #define QMI_WDS_DUN_IND_RX_STATS_MASK 0x00000080 /* qmi_wds_get_dun_call_info input/output structure */ typedef struct { /* Mask of current DUN call info to retrieve */ unsigned long curr_info_mask; /* Each bit in the id_info_mask corresponds to one of the ** fields below it in this structure. If the bit is set, ** the field must be correctly initialized. Each of these ** fields instructs QMI about which items should be reported ** in the DUN indication message */ unsigned long ind_info_mask; /* Indication fields */ unsigned char conn_status_rpt; /* boolean, 0 for off, 1 for on */ struct { unsigned long stats_mask; /*QMI_WDS_DUN_IND_TX_STATS_MASK, QMI_WDS_DUN_IND_RX_STATS_MASK*/ unsigned char stats_period; /*0 - Do not report, >0 - interval between stats report(in seconds) */ }tx_rx_stats_rpt; /* More will be added later... */ } qmi_wds_dun_call_info_cmd_type; /* DUN info return values */ typedef enum { QMI_WDS_DUN_CALL_DISCONNECTED = 0x01, QMI_WDS_DUN_CALL_CONNECTED = 0x02 } qmi_wds_dun_conn_state_type; #define QMI_WDS_DUN_CALL_INFO_CONN_STATUS_RSP_PARAM_MASK 0x00000001 #define QMI_WDS_DUN_CALL_INFO_TX_OK_BYTE_COUNT_RSP_PARAM_MASK 0x00000002 #define QMI_WDS_DUN_CALL_INFO_RX_OK_BYTE_COUNT_RSP_PARAM_MASK 0x00000004 #define QMI_WDS_DUN_CALL_INFO_LAST_CALL_TX_OK_BYTE_COUNT_RSP_PARAM_MASK 0x00000008 #define QMI_WDS_DUN_CALL_INFO_LAST_CALL_RX_OK_BYTE_COUNT_RSP_PARAM_MASK 0x00000010 /* qmi_wds_get_dun_call_info input/output structure */ typedef struct { /* Each bit in the curr_info_mask corresponds to one of the ** fields below it in this structure. If the bit is set, ** the field the field will have valid data */ unsigned long curr_info_mask; /* Response fields */ /* If QMI_WDS_DUN_CALL_INFO_CONN_STATUS_RSP_PARAM_MASK bit is set... */ struct { qmi_wds_dun_conn_state_type conn_state; unsigned long duration[2]; } conn_status; double tx_ok_byte_cnt; double rx_ok_byte_cnt; double last_call_tx_ok_byte_count; double last_call_rx_ok_byte_count; /* More will be added later... */ } qmi_wds_dun_call_info_rsp_type; #define QMI_WDS_DUN_CALL_INFO_CONN_STATUS_IND_PARAM_MASK 0x00000001 #define QMI_WDS_DUN_CALL_INFO_TX_OK_BYTE_COUNT_IND_PARAM_MASK 0x00000002 #define QMI_WDS_DUN_CALL_INFO_RX_OK_BYTE_COUNT_IND_PARAM_MASK 0x00000004 /* QMI WDS DUN call info indication data structure */ typedef struct { unsigned long ind_info_mask; /* Valid if QMI_WDS_DUN_CALL_INFO_CONN_STATUS_IND_PARAM_MASK bit is set in info_mask */ qmi_wds_dun_conn_state_type conn_state; double tx_ok_byte_cnt; double rx_ok_byte_cnt; } qmi_wds_dun_call_info_ind_type; typedef enum { NAT_ABSENT = 0, NAT_PRESENT = 1 } qmi_wds_nat_presence_type; typedef struct { unsigned long param_mask; struct { unsigned long stream_id; qmi_wds_nat_presence_type nat_presence_indicator; unsigned short port_id; } tunnel_params; /* Below are optional parameters and are only valid if ** corresponding bit is set in param mask */ /* Valid if QMI_WDS_FMC_TUNNEL_PARAMS_IPV4_SOCKET_ADDR is set */ unsigned char v4_socket_addr[4]; /* Valid if QMI_WDS_FMC_TUNNEL_PARAMS_IPV6_SOCKET_ADDR is set */ unsigned char v6_socket_addr[16]; } qmi_wds_fmc_tunnel_params_type; /************************************************************************ * Definitions associated with LTE attach PDN list ind and * qmi_wds_set/get_lte_attach_pdn_list ************************************************************************/ typedef struct { int len; int list[QMI_WDS_MAX_LTE_ATTACH_PDN_LIST_SIZE]; } qmi_wds_lte_attach_pdn_list_type; /************************************************************************ * Definitions associated extended IP config change ind ************************************************************************/ typedef qmi_wds_req_runtime_settings_params_type qmi_wds_ext_ip_config_ind_type; /************************************************************************ * Definitions associated with data patch change ind ************************************************************************/ typedef enum { QMI_WDS_DATA_PATH_UNKNOWN = -1, QMI_WDS_DATA_PATH_HW = 0, QMI_WDS_DATA_PATH_SW = 1, /* Should be the last entry */ QMI_WDS_DATA_PATH_MAX } qmi_wds_data_path_type; typedef struct { qmi_wds_data_path_type pref_data_path; qmi_wds_data_path_type actual_data_path; } qmi_wds_data_path_change_ind_type; /************************************************************************* * Async notification reporting structure *************************************************************************/ typedef union { qmi_wds_pkt_srvc_status_type pkt_srvc_status; qmi_wds_event_report_type event_report; qmi_wds_internal_iface_event_ind_data_type iface_event_report; qmi_wds_mob_terminated_packet_handle mt_handle; qmi_wds_mcast_status_ind_type mcast_status; qmi_wds_mbms_mcast_context_status_type mbms_mcast_context_status; qmi_wds_dun_call_info_ind_type dun_call_info; qmi_wds_embms_tmgi_activate_status_ind_type embms_activate_status; qmi_wds_embms_tmgi_deactivate_status_ind_type embms_deactivate_status; qmi_wds_embms_tmgi_act_deactivate_status_ind_type embms_act_deact_status; qmi_wds_embms_tmgi_list_ind_type embms_list; qmi_wds_embms_content_desc_control_ind_type embms_content_desc_control; qmi_wds_lte_attach_pdn_list_type lte_attach_pdn_list; qmi_wds_embms_sai_list_ind_type sai_list; qmi_wds_rev_ip_trans_ind_type rev_ip_conn_ind; qmi_wds_handoff_info_type handoff_info; qmi_wds_ext_ip_config_ind_type ext_ip_ind; qmi_wds_data_path_change_ind_type data_path_ind; } qmi_wds_indication_data_type; typedef void (*qmi_wds_indication_hdlr_type) ( int user_handle, qmi_service_id_type service_id, void *user_data, qmi_wds_indication_id_type ind_id, qmi_wds_indication_data_type *ind_data ); /************************************************************************ * Definitions associated with qmi_wds_get_current_channel_rate ************************************************************************/ /*RESP*/ typedef struct { unsigned long current_channel_tx_rate; unsigned long current_channel_rx_rate; unsigned long max_channel_tx_rate; unsigned long max_channel_rx_rate; }qmi_wds_channel_rate_type; typedef enum { QMI_WDS_MOBILE_IP_MODE_INVALID = -0x01, QMI_WDS_MOBILE_IP_OFF = 0x00, /*will deafault to simple ip*/ QMI_WDS_MOBILE_IP_PREFFERED = 0x01, QMI_WDS_MOBILE_IP_ONLY = 0x02, QMI_WDS_MOBILE_IP_MAX = 0x03 }qmi_wds_mobile_ip_mode_type; typedef unsigned char srvc_programming_code_type[QMI_WDS_MIP_SERVICE_PROGRAMMING_CODE_SIZE]; typedef enum { QMI_WDS_MOBILE_IP_HA_KEY_UNSET = 0x00, QMI_WDS_MOBILE_IP_HA_KEY_SET_TO_DEFAULT = 0x01, QMI_WDS_MOBILE_IP_HA_KEY_SET_TO_NONDEFAULT = 0x02 }qmi_wds_mobile_ip_profile_ha_key_state_type; typedef enum { QMI_WDS_MOBILE_IP_AAA_KEY_UNSET = 0x00, QMI_WDS_MOBILE_IP_AAA_KEY_SET_TO_DEFAULT = 0x01, QMI_WDS_MOBILE_IP_AAA_KEY_SET_TO_NONDEFAULT = 0x02 }qmi_wds_mobile_ip_profile_aaa_key_state_type; #define QMI_WDS_READ_MIP_PROFILE_HA_KEY_PARAM_MASK 0x01 #define QMI_WDS_READ_MIP_PROFILE_AAA_KEY_PARAM_MASK 0x02 #define QMI_WDS_READ_MIP_PROFILE_NAI_PARAM_MASK 0x04 typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned char param_mask; qmi_wds_mobile_ip_profile_ha_key_state_type ha_key_state ; qmi_wds_mobile_ip_profile_aaa_key_state_type aaa_key_state; unsigned char nai_len; unsigned char nai[QMI_WDS_MOBILE_IP_PROFILE_MAX_STR_SIZE]; }qmi_wds_read_mobile_ip_profile_resp_type; /* Parameter indication bits */ #define QMI_WDS_MODIFY_MIP_PROFILE_PROFILE_STATE_PARAM_MASK 0x00000001 #define QMI_WDS_MODIFY_MIP_PROFILE_HOME_ADDR_PARAM_MASK 0x00000002 #define QMI_WDS_MODIFY_MIP_PROFILE_HOME_AGENT_PRIMARY_ADDR_PARAM_MASK 0x00000004 #define QMI_WDS_MODIFY_MIP_PROFILE_HOME_AGENT_SECONDARY_ADDR_PARAM_MASK 0x00000008 #define QMI_WDS_MODIFY_MIP_PROFILE_REVERSE_TUNNEL_PREF_PARAM_MASK 0x00000010 #define QMI_WDS_MODIFY_MIP_PROFILE_NAI_PARAM_MASK 0x00000020 #define QMI_WDS_MODIFY_MIP_PROFILE_HA_SPI_PARAM_MASK 0x00000040 #define QMI_WDS_MODIFY_MIP_PROFILE_AAA_SPI_PARAM_MASK 0x00000080 #define QMI_WDS_MODIFY_MIP_PROFILE_MN_HA_KEY_PARAM_MASK 0x00000100 #define QMI_WDS_MODIFY_MIP_PROFILE_MN_AAA_KEY_PARAM_MASK 0x00000200 typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned long param_mask; unsigned char profile_state;/*0x00 disabled, 0x01 enabled*/ ipv4_addr_type home_address;/*ipv4 format*/ ipv4_addr_type home_agent_primary_address;/*ipv4 format*/ ipv4_addr_type home_agent_secondary_address;/*ipv4 format*/ unsigned char reverse_tunnel_preference;/*0x00 disabled, 0x01 enabled*/ unsigned char nai_len; unsigned char nai[QMI_WDS_MOBILE_IP_PROFILE_MAX_STR_SIZE]; unsigned long ha_spi;/*secrutiy parameter index*/ unsigned long aaa_spi; unsigned char mn_ha_key[QMI_WDS_MOBILE_IP_PROFILE_MAX_STR_SIZE]; unsigned char mn_aaa_key[QMI_WDS_MOBILE_IP_PROFILE_MAX_STR_SIZE]; }qmi_wds_modify_mobile_ip_profile_req_type; /************************************************************************ * Definitions associated with qmi_wds_indication_register ************************************************************************/ #define QMI_WDS_EMBMS_TMGI_INDICATION_REG_LIST_PARAM_MASK 0x00000001 #define QMI_WDS_LTE_ATTACH_PDN_LIST_INDICATION_REG_PARAM_MASK 0x00000002 #define QMI_WDS_EMBMS_SAI_INDICATION_REG_LIST_PARAM_MASK 0x00000004 #define QMI_WDS_HANDOFF_INDICATION_REG_PARAM_MASK 0x00000008 #define QMI_WDS_EXT_IP_CONFIG_CHANGE_IND_REG_LIST_PARAM_MASK 0x00000010 #define QMI_WDS_DATA_PATH_CHANGE_IND_REG_PARAM_MASK 0x00000020 #define QMI_WDS_EMBMS_CONT_DESC_CTRL_INDICATION_REG_LIST_PARAM_MASK 0x00000040 typedef enum { QMI_WDS_EMBMS_TMGI_IND_NO_REPORT = 0x00, QMI_WDS_EMBMS_TMGI_IND_REPORT = 0x01 }qmi_wds_embms_tmgi_ind_pref_type; typedef enum { QMI_WDS_EMBMS_SAI_IND_NO_REPORT = 0x00, QMI_WDS_EMBMS_SAI_IND_REPORT = 0x01 }qmi_wds_embms_sai_ind_pref_type; typedef enum { QMI_WDS_HANDOFF_IND_NO_REPORT = 0x00, QMI_WDS_HANDOFF_IND_REPORT = 0x01 }qmi_wds_handoff_ind_pref_type; typedef enum { QMI_WDS_EXT_IP_CONFIG_CHANGE_NO_REPORT = 0x00, QMI_WDS_EXT_IP_CONFIG_CHANGE_REPORT = 0x01 } qmi_wds_ext_ip_config_change_pref_type; typedef enum { QMI_WDS_DATA_PATH_CHANGE_NO_REPORT = 0x00, QMI_WDS_DATA_PATH_CHANGE_REPORT = 0x01 } qmi_wds_data_path_change_pref_type; typedef enum { QMI_WDS_EMBMS_CONT_DESC_CTRL_IND_NO_REPORT= 0x00, QMI_WDS_EMBMS_CONT_DESC_CTRL_IND_REPORT = 0x01, }qmi_wds_embms_cont_desc_ctrl_ind_pref_type; typedef struct { /* Bitmask which indicates which of the below ** parameters has been set */ unsigned long param_mask; /* Valid if QMI_WDS_EMBMS_TMGI_INDICATION_REG_LIST_PARAM_MASK is set */ qmi_wds_embms_tmgi_ind_pref_type tmgi_list_pref; /* Valid if QMI_WDS_LTE_ATTACH_PDN_LIST_INDICATION_REG_PARAM_MASK is set */ unsigned char report_lte_attach_pdn_list_change; qmi_wds_embms_sai_ind_pref_type sai_list_pref; qmi_wds_handoff_ind_pref_type handoff_pref; /* Valid if QMI_WDS_EXT_IP_CONFIG_CHANGE_IND_REG_LIST_PARAM_MASK is set */ qmi_wds_ext_ip_config_change_pref_type ext_ip_pref; /* Valid if QMI_WDS_DATA_PATH_CHANGE_IND_REG_PARAM_MASK is set */ qmi_wds_data_path_change_pref_type data_path_pref; /* Valid if QMI_WDS_EMBMS_CONT_DESC_CTRL_INDICATION_REG_LIST_PARAM_MASK is set */ qmi_wds_embms_cont_desc_ctrl_ind_pref_type cont_desc_ctrl_pref; } qmi_wds_indication_reg_req_type; /************************************************************************ * Definitions associated with qmi_wds_rev_ip_transport_conn_ind_registration ************************************************************************/ typedef enum { QMI_WDS_REV_IP_TRANSPORT_CONN_IND_DEREGISTER, QMI_WDS_REV_IP_TRANSPORT_CONN_IND_REGISTER } qmi_wds_rev_ip_transport_reg_status_type; /************************************************************************ * Definitions associated with qmi_wds_get_ipsec_static_sa_config ************************************************************************/ #define QMI_WDS_IPSEC_SPI_RX_PARAM_MASK (0x00000001) #define QMI_WDS_IPSEC_SPI_TX_PARAM_MASK (0x00000002) #define QMI_WDS_IPSEC_SA_PROTO_PARAM_MASK (0x00000004) #define QMI_WDS_IPSEC_ENCAP_MODE_PARAM_MASK (0x00000008) #define QMI_WDS_IPSEC_DEST_ADDR_PARAM_MASK (0x00000010) #define QMI_WDS_IPSEC_LOCAL_ADDR_PARAM_MASK (0x00000020) #define QMI_WDS_IPSEC_HASH_ALGO_PARAM_MASK (0x00000040) #define QMI_WDS_IPSEC_HASH_KEY_RX_PARAM_MASK (0x00000080) #define QMI_WDS_IPSEC_HASH_KEY_TX_PARAM_MASK (0x00000100) #define QMI_WDS_IPSEC_CRYPTO_ALGO_PARAM_MASK (0x00000200) #define QMI_WDS_IPSEC_CRYPTO_KEY_RX_PARAM_MASK (0x00000400) #define QMI_WDS_IPSEC_CRYPTO_KEY_TX_PARAM_MASK (0x00000800) #define QMI_WDS_IPSEC_IV_PARAM_MASK (0x00001000) #define QMI_WDS_IPSEC_UDP_ENCAP_PARAM_MASK (0x00002000) #define QMI_WDS_IPSEC_NAT_LOCAL_ADDR_PARAM_MASK (0x00004000) #define QMI_WDS_IPSEC_NAT_REMOTE_ADDR_PARAM_MASK (0x00008000) #define QMI_WDS_IPSEC_CFG_ATTR_PARAM_MASK (0x00010000) #define QMI_WDS_IPSEC_TS_LIST_PARAM_MASK (0x00020000) #define QMI_WDS_IPSEC_AES_MODE_PARAM_MASK (0x00040000) #define QMI_WDS_IPSEC_TS_RESP_LIST_PARAM_MASK (0x00080000) #define QMI_WDS_IPSEC_MAX_KEY_SIZE (32) #define QMI_WDS_IPSEC_MAX_CRYPTO_KEY_SIZE (32) #define QMI_WDS_IPSEC_MAX_IV_SIZE (32) #define QMI_WDS_IPSEC_MAX_CFG_DATA_SIZE (32) #define QMI_WDS_IPSEC_MAX_TRAFFIC_SEL_SIZE (4) typedef enum { QMI_WDS_IPSEC_SA_PROTO_UNDEFINED = 0x00, QMI_WDS_IPSEC_SA_PROTO_ISAKMP = 0x01, /* Internet Security Association and Key Management Protocol */ QMI_WDS_IPSEC_SA_PROTO_AH = 0x02, /* Authentication Header */ QMI_WDS_IPSEC_SA_PROTO_ESP = 0x03 /* Encapsulating Security Payload */ } qmi_wds_ipsec_sa_proto_type; typedef enum { QMI_WDS_IPSEC_ENCAP_MODE_UNDEFINED = 0x00, QMI_WDS_IPSEC_ENCAP_MODE_TUNNEL = 0x01, QMI_WDS_IPSEC_ENCAP_MODE_TRANSPORT = 0x02 } qmi_wds_ipsec_encapsulation_mode; typedef unsigned long qmi_wds_security_param_index_type; typedef struct { qmi_wds_ip_family family; qmi_wds_ipv4_ipv6_addr_type addr; } qmi_wds_ip_addr_type; typedef enum { QMI_WDS_IPSEC_ALGO_NULL_KEY_X = 0x00, /* No key exchange protocol used */ QMI_WDS_IPSEC_ALGO_MODEXP = 0x01, /* Generic modulo exponentiation */ QMI_WDS_IPSEC_ALGO_DIFFIE_HELLMAN = 0x02, /* Diffie-Hellman key exchange protocol */ QMI_WDS_IPSEC_ALGO_RSA = 0x03, /* RSA Encrypt/Key exchange protocol */ QMI_WDS_IPSEC_ALGO_NULL_HASH = 0x04, /* No simultaneous hash with encryption-decryption */ QMI_WDS_IPSEC_ALGO_SHA = 0x05, /* SHA-1 hash function */ QMI_WDS_IPSEC_ALGO_SHA256 = 0x06, /* SHA256 hash function */ QMI_WDS_IPSEC_ALGO_MD5 = 0x07, /* MD5 hash function */ QMI_WDS_IPSEC_ALGO_NULL_CIPHER = 0x08, /* No encryption selected */ QMI_WDS_IPSEC_ALGO_DES = 0x09, /* DES encryption/decryption function */ QMI_WDS_IPSEC_ALGO_3DES = 0x0A, /* 3DES encryption/decryption function */ QMI_WDS_IPSEC_ALGO_ARC4 = 0x0B, /* ARC4 encryption/decryption function */ QMI_WDS_IPSEC_ALGO_AES128 = 0x0C, /* AES cipher; 128-bit key */ QMI_WDS_IPSEC_ALGO_C2 = 0x0D, /* C2 cipher */ QMI_WDS_IPSEC_ALGO_AES128_CMAC = 0x0E, /* 128-bit AES in CMAC mode */ QMI_WDS_IPSEC_ALGO_SNOW3G_UEA2 = 0x0F, /* UEA2 SNOW 3G Encryption Algorithm */ QMI_WDS_IPSEC_ALGO_SNOW3G_UIA2 = 0x10, /* UIA2 SNOW 3G Integrity Algorithm */ QMI_WDS_IPSEC_ALGO_ZUC_CIPHER = 0x11, /* UEA3 ZUC Encryption Algorithm */ QMI_WDS_IPSEC_ALGO_ZUC_INTEGRITY = 0x12, /* UIA3 ZUC Integrity Algorithm */ QMI_WDS_IPSEC_ALGO_AES256 = 0x13 /* AES Cipher; 256-bit key */ } qmi_wds_ipsec_hash_crypto_algo_type; typedef enum { QMI_WDS_IPSEC_AES_ALGO_MODE_MIN, QMI_WDS_IPSEC_AES_ALGO_MODE_CBC, QMI_WDS_IPSEC_AES_ALGO_MODE_CTR } qmi_wds_ipsec_aes_algo_mode_type; typedef struct { unsigned char size; unsigned char key[QMI_WDS_IPSEC_MAX_KEY_SIZE]; } qmi_wds_ipsec_key_type; typedef struct { unsigned char proto; unsigned short start_port; unsigned short end_port; qmi_wds_ip_addr_type start_addr; qmi_wds_ip_addr_type end_addr; } qmi_wds_ipsec_traffic_sel_type; #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_ADDR_PARAM_MASK (0x00000001) #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_NETMASK_PARAM_MASK (0x00000002) #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_DNS_PARAM_MASK (0x00000004) #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_NBNS_PARAM_MASK (0x00000008) #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_ADDR_EXPIRY_PARAM_MASK (0x00000010) #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_DHCP_PARAM_MASK (0x00000020) #define QMI_WDS_IPSEC_CFG_ATTR_APP_VERSION_PARAM_MASK (0x00000040) #define QMI_WDS_IPSEC_CFG_ATTR_IPV6_ADDR_PARAM_MASK (0x00000080) #define QMI_WDS_IPSEC_CFG_ATTR_IPV6_DNS_PARAM_MASK (0x00000100) #define QMI_WDS_IPSEC_CFG_ATTR_IPV6_NBNS_PARAM_MASK (0x00000200) #define QMI_WDS_IPSEC_CFG_ATTR_IPV6_DHCP_PARAM_MASK (0x00000400) #define QMI_WDS_IPSEC_CFG_ATTR_IPV4_SUBNET_PARAM_MASK (0x00000800) #define QMI_WDS_IPSEC_CFG_ATTR_SUPPORTED_ATTR_PARAM_MASK (0x00001000) #define QMI_WDS_IPSEC_CFG_ATTR_IPV6_SUBNET_PARAM_MASK (0x00002000) #define QMI_WDS_IPSEC_CFG_ATTR_PCSCF_IPV4_ADDR_PARAM_MASK (0x00004000) #define QMI_WDS_IPSEC_CFG_ATTR_PCSCF_IPV6_ADDR_PARAM_MASK (0x00008000) #define QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP4_HA_PARAM_MASK (0x00010000) #define QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP4_HOA_PARAM_MASK (0x00020000) #define QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP6_HA_PARAM_MASK (0x00040000) #define QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP6_HOA_PARAM_MASK (0x00080000) #define QMI_WDS_IPSEC_CFG_ATTR_MAX_ATTRS (3) typedef struct { ipv4_addr_type addr[QMI_WDS_IPSEC_CFG_ATTR_MAX_ATTRS]; int num_ele; } qmi_wds_ipsec_cfg_attr_ipv4_addr_type; typedef struct { qmi_ipv6_addr_type addr[QMI_WDS_IPSEC_CFG_ATTR_MAX_ATTRS]; int num_ele; } qmi_wds_ipsec_cfg_attr_ipv6_addr_type; typedef struct { char data[QMI_WDS_IPSEC_MAX_CFG_DATA_SIZE]; int num_valid; } qmi_wds_ipsec_cfg_attr_data_type; typedef struct { qmi_ipv4_addr_type addr[QMI_WDS_IPSEC_MAX_CFG_DATA_SIZE]; int num_valid; } qmi_wds_ipsec_cfg_attr_ipv4_subnet_type; typedef struct { unsigned long param_mask; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_ADDR_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_addr; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_NETMASK_PARAM_MASK is set */ ipv4_addr_type ipv4_netmask; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_DNS_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_dns; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_NBNS_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_nbns; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_ADDR_EXPIRY_PARAM_MASK is set */ unsigned long addr_expiry; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_DHCP_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_dhcp; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_APP_VERSION_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_data_type app_version; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV6_ADDR_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_addr; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV6_DNS_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_dns; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV6_NBNS_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_nbns; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV6_DHCP_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_dhcp; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV4_SUBNET_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_subnet_type ipv4_subnet; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_SUPPORTED_ATTR_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_data_type supported_attrs; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_IPV6_SUBNET_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_subnet; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_PCSCF_IPV4_ADDR_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_pcscf; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_PCSCF_IPV6_ADDR_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_pcscf; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP4_HA_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_mip_ha; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP4_HOA_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv4_addr_type ipv4_mip_hoa; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP6_HOA_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_mip_ha; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_3GPP2_MIP6_HOA_PARAM_MASK is set */ qmi_wds_ipsec_cfg_attr_ipv6_addr_type ipv6_mip_hoa; } qmi_wds_ipsec_cfg_attr_type; typedef struct { int len; qmi_wds_ipsec_traffic_sel_type ts[QMI_WDS_IPSEC_MAX_TRAFFIC_SEL_SIZE]; } qmi_wds_ipsec_traffic_sel_list_type; typedef struct { unsigned long param_mask; /* Valid if QMI_WDS_IPSEC_SPI_RX_PARAM_MASK is set in the param_mask */ qmi_wds_security_param_index_type spi_rx; /* Valid if QMI_WDS_IPSEC_SPI_TX_PARAM_MASK is set in the param_mask */ qmi_wds_security_param_index_type spi_tx; /* Valid if QMI_WDS_IPSEC_SA_PROTO_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_sa_proto_type proto; /* Valid if QMI_WDS_IPSEC_ENCAP_MODE_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_encapsulation_mode encap_mode; /* Valid if QMI_WDS_IPSEC_DEST_ADDR_PARAM_MASK is set in the param_mask */ qmi_wds_ip_addr_type dest_addr; /* Valid if QMI_WDS_IPSEC_LOCAL_ADDR_PARAM_MASK is set in the param_mask */ qmi_wds_ip_addr_type local_addr; /* Valid if QMI_WDS_IPSEC_HASH_ALGO_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_hash_crypto_algo_type hash_algo; /* Valid if QMI_WDS_IPSEC_CRYPTO_KEY_RX_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_key_type hash_key_rx; /* Valid if QMI_WDS_IPSEC_CRYPTO_KEY_TX_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_key_type hash_key_tx; /* Valid if QMI_WDS_IPSEC_CRYPTO_ALGO_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_hash_crypto_algo_type crypto_algo; /* Valid if QMI_WDS_IPSEC_CRYPTO_KEY_RX_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_key_type crypto_key_rx; /* Valid if QMI_WDS_IPSEC_CRYPTO_KEY_TX_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_key_type crypto_key_tx; /* Valid if QMI_WDS_IPSEC_IV_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_key_type iv; /* Valid if QMI_WDS_IPSEC_UDP_ENCAP_PARAM_MASK is set in the param_mask */ unsigned char is_udp_encap; /* Valid if QMI_WDS_IPSEC_NAT_LOCAL_ADDR_PARAM_MASK is set in the param_mask */ qmi_wds_ip_addr_type nat_local_addr; /* Valid if QMI_WDS_IPSEC_NAT_REMOTE_ADDR_PARAM_MASK is set in the param_mask */ qmi_wds_ip_addr_type nat_remote_addr; /* Valid if QMI_WDS_IPSEC_CFG_ATTR_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_cfg_attr_type cfg_attr; /* Valid if QMI_WDS_IPSEC_TS_LIST_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_traffic_sel_list_type ts_list; /* Valid if QMI_WDS_IPSEC_TS_RESP_LIST_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_traffic_sel_list_type ts_list_resp; /* Valid if QMI_WDS_IPSEC_AES_MODE_PARAM_MASK is set in the param_mask */ qmi_wds_ipsec_aes_algo_mode_type aes_mode; } qmi_wds_ipsec_sa_config_type; /************************************************************************ * Definitions associated with qmi_wds_rev_ip_transport_config_complete ************************************************************************/ typedef enum { QMI_WDS_REV_IP_TRANSPORT_CONFIG_FAIL, QMI_WDS_REV_IP_TRANSPORT_CONFIG_SUCCESS, } qmi_wds_rev_ip_transport_config_result_type; /************************************************************************ * Definitions associated with qmi_wds_set/get_lte_attach_type ************************************************************************/ typedef enum { QMI_WDS_LTE_ATTACH_TYPE_INVALID = -1, QMI_WDS_LTE_ATTACH_TYPE_INITIAL = 0, QMI_WDS_LTE_ATTACH_TYPE_HANDOFF = 1, QMI_WDS_LTE_ATTACH_TYPE_MAX } qmi_wds_lte_attach_type; /************************************************************************ * Definitions associated with qmi_wds_set/get_data_path_pref ************************************************************************/ #define QMI_WDS_PREF_DATA_PATH_PARAM_MASK (0x00000001) #define QMI_WDS_ACTUAL_DATA_PATH_PARAM_MASK (0x00000002) typedef struct { unsigned int param_mask; /* Valid if QMI_WDS_PREF_DATA_PATH_PARAM_MASK is set in param_mask */ qmi_wds_data_path_type pref_data_path; /* Valid if QMI_WDS_ACTUAL_DATA_PATH_PARAM_MASK is set in param_mask */ qmi_wds_data_path_type actual_data_path; } qmi_wds_get_data_path_type; /************************************************************************ * Definitions associated with qmi_wds_remove_delegated_ipv6_prefix ************************************************************************/ typedef struct { ipv6_addr_type ipv6_addr; unsigned char prefix_len; } qmi_wds_delegated_ipv6_prefix_type; /************************************************************************ * Function prototypes ************************************************************************/ /*=========================================================================== FUNCTION qmi_wds_srvc_init_client ===========================================================================*/ /*! @brief This function is called to initialize the WDS service. This function must be called prior to calling any other WDS service functions. For the time being, the indication handler callback and user data should be set to NULL until this is implemented. Also note that this function may be called multiple times to allow for multiple, independent clients. @return 0 if abort operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - Dependencies - qmi_connection_init() must be called for the associated port first. - Side Effects - Talks to modem processor */ /*=========================================================================*/ EXTERN qmi_client_handle_type qmi_wds_srvc_init_client ( const char *dev_id, qmi_wds_indication_hdlr_type user_ind_msg_hdlr, void *user_ind_msg_hdlr_user_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_srvc_release_client ===========================================================================*/ /*! @brief This function is called to release a client created by the qmi_wds_srvc_init_client() function. This function should be called for any client created when terminating a client process, especially if the modem processor is not reset. The modem side QMI server has a limited number of clients that it will allocate, and if they are not released, we will run out. @return 0 if abort operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - Dependencies - qmi_connection_init() must be called for the associated port first. - Side Effects - Talks to modem processor */ /*=========================================================================*/ EXTERN int qmi_wds_srvc_release_client ( int user_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_bind_mux_data_port ===========================================================================*/ /*! @brief Binds a QMI-WDS client to a MUX data port. In the case of QMAP, we will have a single control channel, so WDS clients need to specify which data port their actions need to be associated with. @param[in] user_handle: QMI WDS client handle. @param[in] params: Bind MUX data port specification @param[out] qmi_err_code: QMI error code in case of failure. @see qmi_wds_bind_mux_data_port_params_type @return 0 if operation was successful. < 0 If operation failed. qmi_err_code will contain the reason. @dependencies qmi_wds_srvc_init_client() must be called before calling this. */ /*=========================================================================*/ EXTERN int qmi_wds_bind_mux_data_port ( int user_handle, qmi_wds_bind_mux_data_port_params_type *params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_bind_subscription ===========================================================================*/ /*! @brief Binds a QMI-WDS client to Subscription. @param[in] user_handle: QMI WDS client handle. @param[in] params: Subscription ID @param[out] qmi_err_code: QMI error code in case of failure. @see qmi_wds_bind_subscription_type @return 0 if operation was successful. < 0 If operation failed. qmi_err_code will contain the reason. @dependencies qmi_wds_srvc_init_client() must be called before calling this. */ /*=========================================================================*/ EXTERN int qmi_wds_bind_subscription ( int user_handle, qmi_wds_bind_subscription_type subs_id, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_bind_subscription ===========================================================================*/ /*! @brief This message queries the current subscription the client is bound to. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_bind_subscription ( int user_handle, qmi_wds_bind_subscription_type *subs_id, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_start_nw_if ===========================================================================*/ /*! @brief Brings up a data call. Call profile parameters can be specified in the params parameter, or this pointer can be set to NULL, in which case the default profile will be brought up. If the user_cb function pointer is set to NULL, then this function will be invoked synchronously, otherwise it will be invoked asynchronously. @return In the synchronous case, if return code < 0, the operation failed. In the failure case, if the return code is QMI_SERVICE_ERR, then the qmi_err_code value will give you the QMI error reason. Otherwise, qmi_err_code will have meaningless data. In the asynchronous case, if the return code < 0, the operation failed and you will not get an asynchronous response. If the operation doesn't fail (return code >=0), the returned value will be a transaction handle which can be used to cancel the transaction via the qmi_wds_abort() command. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - Brings up a data call */ /*=========================================================================*/ EXTERN int qmi_wds_start_nw_if ( int user_handle, qmi_wds_start_nw_if_params_type *params, qmi_wds_user_async_cb_type user_cb, void *user_data, qmi_wds_call_end_reason_type *call_end_reason_resp, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_stop_nw_if ===========================================================================*/ /*! @brief Brings down a data call. If the user_cb function pointer is set to NULL, then this function will be invoked synchronously, otherwise it will be invoked asynchronously. @return In the synchronous case, if return code < 0, the operation failed. In the failure case, if the return code is QMI_SERVICE_ERR, then the qmi_err_code value will give you the QMI error reason. Otherwise, qmi_err_code will have meaningless data. In the asynchronous case, if the return code < 0, the operation failed and you will not get an asynchronous response. If the operation doesn't fail (return code >=0), the returned value will be a transaction handle which can be used to cancel the transaction via the qmi_wds_abort() command. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - Brings up a data call */ /*=========================================================================*/ EXTERN int qmi_wds_stop_nw_if ( int client_handle, qmi_wds_user_async_cb_type user_cb, void *user_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_reset ===========================================================================*/ /*! @brief Resets WDS service. If the user_cb function pointer is set to NULL, then this function will be invoked synchronously, otherwise it will be invoked asynchronously. @return In the synchronous case, if return code < 0, the operation failed. In the failure case, if the return code is QMI_SERVICE_ERR, then the qmi_err_code value will give you the QMI error reason. Otherwise, qmi_err_code will have meaningless data. In the asynchronous case, if the return code < 0, the operation failed and you will not get an asynchronous response. If the operation doesn't fail (return code >=0), the returned value will be a transaction handle which can be used to cancel the transaction via the qmi_wds_abort() command. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - Resets WDS service */ /*=========================================================================*/ EXTERN int qmi_wds_reset ( int client_handle, qmi_wds_user_async_cb_type user_cb, void *user_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_abort ===========================================================================*/ /*! @brief Aborts an asynchronous WDS operation. If the user_cb function pointer is set to NULL, then this function will be invoked synchronously, otherwise it will be invoked asynchronously. The txn_handle parameter is the return code returned from any other asynchronous WDS call. Note that synchronous API calls cannot be aborted. @return 0 if abort operation was sucessful, < 0 if not. In the case where the abort is successful, an asychronous reply to the aborted command will NOT be returned, otherwise, it will. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error. Note that asynchronous abort commands cannot themselves be aborted. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - Resets WDS service */ /*=========================================================================*/ EXTERN int qmi_wds_abort ( int client_handle, int txn_handle, qmi_wds_user_async_cb_type user_cb, void *user_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_indication_register ===========================================================================*/ /*! @brief Register/deregister for different QMI_WDS indications. Indication includes EMBMS TMGI Status indication and EMBMS TMGI List indication. At lease one indication must be present. It is invoked synchronously. @return 0 if register/deregister was sucessful, < 0 if not. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - Resets WDS service */ /*=========================================================================*/ EXTERN int qmi_wds_indication_register ( int user_handle, qmi_wds_indication_reg_req_type ind_reg_req, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_embms_tmgi_activate ===========================================================================*/ /*! @brief Activates a TMGI for EMBMS. It is invoked synchronously. @return 0 if activate operation was sucessful, < 0 if not. In the case where the activate operation is successful, a Status indication will be returned, otherwise, it will not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - None */ /*=========================================================================*/ EXTERN int qmi_wds_embms_tmgi_activate ( int user_handle, qmi_wds_embms_actdeact_tmgi_info_type *params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_embms_tmgi_deactivate ===========================================================================*/ /*! @brief Deactivates a TMGI for EMBMS. It is invoked synchronously. @return 0 if deactivate operation was sucessful, < 0 if not. In the case where the deactivate operation is successful, a Status indication will be returned, otherwise, it will not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - None */ /*=========================================================================*/ EXTERN int qmi_wds_embms_tmgi_deactivate ( int user_handle, qmi_wds_embms_actdeact_tmgi_info_type *params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_embms_tmgi_activate_deactivate ===========================================================================*/ /*! @brief Activate a TMGI and Deactivates different TMGIs for EMBMS. It is invoked synchronously. @return 0 if activate and deactivate operation was sucessful, < 0 if not. In the case where the activate and deactivate operation is successful, a Status indication will be returned, otherwise, it will not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - None */ /*=========================================================================*/ EXTERN int qmi_wds_embms_tmgi_activate_deactivate ( int user_handle, qmi_wds_embms_actdeact_tmgi_info_type *params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_embms_tmgi_list_query ===========================================================================*/ /*! @brief Queries active or available TMGI list. It is invoked synchronously. @return 0 if query operation was sucessful, < 0 if not. In the case where the query operation is successful, a Status indication will be returned, otherwise, it will not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - None */ /*=========================================================================*/ EXTERN int qmi_wds_embms_tmgi_list_query ( int user_handle, qmi_wds_embms_tmgi_list_type list_type, qmi_wds_embms_tmgi_list_ind_type *list_query, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_embms_content_desc_update ===========================================================================*/ /*! @brief Updates embms content desc. It is invoked synchronously. @return 0 if query operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error. @note - Dependencies - qmi_wds_srvc_init_client() must be called before calling this. - Side Effects - None */ /*=========================================================================*/ EXTERN int qmi_wds_embms_content_desc_update ( int user_handle, qmi_wds_embms_content_desc_update_info_type *params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_create_profile ===========================================================================*/ /*! @brief Takes as input a user client handle, WDS profile parameters and a WDS profile ID structure and creates a QMI profile (on modem processor) based on these parameters. The input profile ID MUST have the 'technology' field set to a valid value. Note that each of the 'profile_params' structure values are optional. To indicate that a particular structure field is valid in the input parameters, the corresponding bit should be set in the 'param_mask' field of the structure. For example if the 'secondary_dns_pref_addr' field has been filled in and is valid, the QMI_WDS_PROFILE_PARAM_SEC_DNS bit should be set in the 'param_mask' @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. Upon successful return, the profile ID parameter will have the 'profile_index' field set to the profile index of the newly created profile. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_create_profile ( int user_handle, qmi_wds_profile_id_type *profile_id, qmi_wds_profile_params_type *profile_params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_modify_profile ===========================================================================*/ /*! @brief Takes as input a user client handle, WDS profile parameters and a WDS profile ID structure and modifies parameters of an existing profile on the modem processor. The input profile ID MUST have the 'technology' field and 'profile_index' set to an existing valid profile index value. Note that each of the 'profile_params' structure values are optional. To indicate that a particular structure field is valid in the input parameters, the corresponding bit should be set in the 'param_mask' field of the structure. For example if the 'secondary_dns_pref_addr' field has been filled in and is valid, the QMI_WDS_PROFILE_PARAM_SEC_DNS bit should be set in the 'param_mask' @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_modify_profile ( int user_handle, qmi_wds_profile_id_type *profile_id, qmi_wds_profile_params_type *profile_params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_query_profile ===========================================================================*/ /*! @brief Takes as input a user client handle, and a WDS profile ID structure and queries the parameters of an existing profile on the modem processor. The input profile ID MUST have the 'technology' field and 'profile_index' set to an existing valid profile index value. The current values of the parameters will be returned in the profile_params structure. Note that each of the 'profile_params' structure values are optional. To indicate that a particular structure field is valid in the output parameters, the corresponding bit will be set in the 'param_mask' field of the structure. For example if the 'secondary_dns_pref_addr' field has been filled in and is valid, the QMI_WDS_PROFILE_PARAM_SEC_DNS bit will be set in the 'param_mask' @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_query_profile ( int user_handle, qmi_wds_profile_id_type *profile_id, qmi_wds_profile_params_type *profile_params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_delete_profile ===========================================================================*/ /*! @brief Takes as input a user client handle, and a WDS profile ID structure and deletes an existing profile on the modem processor. The input profile ID MUST have the 'technology' field and 'profile_index' set to an existing valid profile index value. @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_delete_profile ( int user_handle, qmi_wds_profile_id_type *profile_id, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_profile_list ===========================================================================*/ /*! @brief Takes as input a user client handle, and an array of profile query structures in which to place response, and the number of elements in that array. Note that the num_profile_list_elements is both an input and output parameter. It should be used to indicated the number of elements in the profile_list array when calling the function, and will contain the number of elements returned when the function returns. @return Returned is the array filled in with return data, and the number of elements of the array that have been returned. QMI_INTERNAL_ERR or QMI_SERVICE_ERR if an error occurred, QMI_NO_ERR if not. If QMI_SERVICE_ERR is returned, the qmi_err_code return parameter will be valid, otherwise it won't If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_profile_list ( int user_handle, qmi_wds_profile_list_type *profile_list, int *num_profile_list_elements, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_route_look_up ===========================================================================*/ /*! @brief Takes as input a user client handle, and an array of profile query structures in which to place response, and the number of elements in that array. Note that the num_profile_list_elements is both an input and output parameter. It should be used to indicated the number of elements in the profile_list array when calling the function, and will contain the number of elements returned when the function returns. @return Returned is the array filled in with return data, and the number of elements of the array that have been returned. QMI_INTERNAL_ERR or QMI_SERVICE_ERR if an error occurred, QMI_NO_ERR if not. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_route_look_up ( int user_handle, qmi_wds_route_look_up_params_type *params, qmi_wds_route_look_up_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_internal_runtime_settings ===========================================================================*/ /*! @brief Takes as input the intenal settings request params type and returns the data sessions settings currently in use. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_internal_runtime_settings ( int user_handle, qmi_wds_internal_runtime_setings_params_type *params, qmi_wds_internal_runtime_settings_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_refresh_dhcp_config_info ===========================================================================*/ /*! @brief This message will trigger DHCP in the background and allow the control point to refresh the dhcp configuration. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_refresh_dhcp_config_info ( int user_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_reg_mobile_terminated_call_req ===========================================================================*/ /*! @brief This message will allow a control point to register for a mobile terminated (MT) call request event. 3GPP profile ID is the input along with ip family preference and tech preference. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_reg_mobile_terminated_call_req ( int user_handle, qmi_wds_reg_mob_term_call_req_params *params, qmi_wds_reg_mob_terminated_call_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_dereg_mobile_terminated_call_req ===========================================================================*/ /*! @brief This message will take as input a mobile terminated related packet handle allow the control point to de register for mob term call request event. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_dereg_mobile_terminated_call_req ( int user_handle, mob_terminated_packet_handle *mt_handle, qmi_wds_de_reg_mob_terminated_call_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_bcmcs_db_update_req ===========================================================================*/ /*! @brief This message will take as input the bcmcs database info and allow the control point to update the bcmcs database table. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_bcmcs_db_update_req ( int user_handle, qmi_wds_bcmcs_db_updt_params_type *bcmcs_db_data, qmi_wds_bcmcs_db_updt_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_bcmcs_enable_handoff_reg_req ===========================================================================*/ /*! @brief This message will take as input a bcmcs handoff optimization info and allows a control point to perform bcmcs handoff optimization for registration. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_bcmcs_enable_handoff_reg_req ( int user_handle, qmi_wds_bcmcs_handoff_optimization_info *handoff_optization_info, qmi_wds_bcmcs_enable_handoff_reg_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_bcmcs_bom_caching_setup_req ===========================================================================*/ /*! @brief This message will take as input a bmccs caching setup info and thereby allows a control point to enable or disable bcmcs bom caching. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_bcmcs_bom_caching_setup_req ( int user_handle, qmi_wds_bom_caching_setup_req_param_type *bom_setup_info, qmi_wds_bcmcs_bom_caching_setup_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mcast_join_ex ===========================================================================*/ /*! @brief This message will take as input a list of multicast ip addresses and initiates a join on those addresses to a session. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mcast_join_ex ( int user_handle, qmi_wds_mcast_join_req_params_type *mcast_info, qmi_wds_initiate_mcast_join_ex_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mcast_leave_ex ===========================================================================*/ /*! @brief This message will take as input the list of mulitcast handles and initiates them to leave the flows/sessions . @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mcast_leave_ex ( int user_handle, qmi_wds_mcast_hndl_list_type *mcast_hndl_list, qmi_wds_initiate_mcast_leave_ex_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_curr_call_info ===========================================================================*/ /*! @brief Takes as input a user client handle, and returns the current call info for that client in the profile_id, profile_params and call_settings @return QMI_INTERNAL_ERR or QMI_SERVICE_ERR if an error occurred, QMI_NO_ERR if not. If QMI_SERVICE_ERR is returned, the qmi_err_code return parameter will be valid, otherwise it won't @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_get_curr_call_info ( int user_handle, qmi_wds_req_runtime_settings_params_type requested_settings, qmi_wds_profile_id_type *profile_id, qmi_wds_profile_params_type *profile_params, qmi_wds_curr_call_info_type *call_settings, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_internal_iface_event_reg_req ===========================================================================*/ /*! @brief Registers the control point for events which can be specified by an event mask. @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects */ /*=========================================================================*/ EXTERN int qmi_wds_internal_iface_event_reg_req ( int user_handle, qmi_wds_iface_event_register_param_type event_mask, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_go_active_req ===========================================================================*/ /*! @brief This message will force the device to re-establish the traffic channel on serving radio interface immediately. This message has no user specified params required. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_go_active_req ( int user_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_internal_runtime_settings ===========================================================================*/ /*! @brief Takes as input the intenal settings request params type and allows the control point to set or modify some internal packet data session settings. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_set_internal_runtime_settings ( int user_handle, qmi_wds_set_internal_runtime_settings_params_type *params, qmi_wds_set_internal_runtime_settings_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mcast_register_ex ===========================================================================*/ /*! @brief This message will take as input the list of mulitcast handles and initiates them to leave the flows/sessions . @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mcast_register_ex ( int user_handle, qmi_wds_mcast_hndl_list_type *mcast_handle_list, qmi_wds_initiate_mcast_reg_ex_rsp_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mcast_join ===========================================================================*/ /*! @brief This message will take as input the multicast ip addr, and joins the ip addr to the multicast session. The differece from the ex version is that only a single ip addr message is handled here to be joined. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mcast_join ( int user_handle, qmi_wds_mcast_ipv4_join_info_param_type *mcast_join_info, qmi_wds_mcast_hndl_rsp_type *mcast_hndl_resp, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mcast_leave ===========================================================================*/ /*! @brief This message will take as input the multicast ip addr, and joins the ip addr to the multicast session. The differece from the ex version is that only a single ip addr message is handled here to be joined. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mcast_leave ( int user_handle, qmi_wds_mcast_hndl_param_type *mcast_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mbms_context_activate ===========================================================================*/ /*! @brief This message will take as input the ipv4 context activation info consisting of ipv4 addr to join and profile id and then activates the MBMS context. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mbms_context_activate ( int user_handle, qmi_wds_mbms_context_req_params_type *params, qmi_wds_mbms_context_handle *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_mbms_context_deactivate ===========================================================================*/ /*! @brief This message will take as input the multicast context handle and deactivates the mbms context. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_initiate_mbms_context_deactivate ( int user_handle, qmi_wds_mbms_context_handle *param, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_current_bearer_tech ===========================================================================*/ /*! @brief This message queries the current data bearer technology. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_current_bearer_tech ( int user_handle, qmi_wds_data_bearer_tech_type *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_current_bearer_tech_ex ===========================================================================*/ /*! @brief This message queries the current extended data bearer technology. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_current_bearer_tech_ex ( int user_handle, qmi_wds_data_bearer_tech_type_ex *rsp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_current_channel_rate ===========================================================================*/ /*! @brief This message will force the device to re-establish the traffic channel on serving radio interface immediately. This message has no user specified params required. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_current_channel_rate ( int user_handle, qmi_wds_channel_rate_type *resp_data, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_go_dormant_req ===========================================================================*/ /*! @brief This message will force the device to drop the traffic channel on serving radio interface immediately. This message has no user specified params required. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_go_dormant_req ( int user_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_pkt_statistics ===========================================================================*/ /*! @brief Takes as input the route lookup params type and returns the route lookup response. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_pkt_statistics ( int user_handle, unsigned long stats_mask, qmi_wds_xfer_stats *stats_resp, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_event_report ===========================================================================*/ /*! @brief Takes as input a user client handle and an event reporting parameters structure and registers for the specified events. The events will be reported as asynchronous indications @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_set_event_report ( int user_handle, qmi_wds_event_report_params_type *event_params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_dormancy_status ===========================================================================*/ /*! @brief Gets current dormancy status. @return QMI_NO_ERR (0) if no error occurred, one of the other QMI_*_ERR codes (< 0) if an error occurred. If return is QMI_SERVICE_ERR, the the qmi_err_code is valid and contains one of the QMI_SERVICE_ERR_* error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_dormancy_status ( int user_handle, qmi_wds_dorm_status_type *dorm_status, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_default_settings ===========================================================================*/ /*! @brief Takes as input a user client handle, and a WDS profile ID structure and queries the parameters of the default profile modem processor. The input profile_id field MUST have the 'technology' field set to a valid profile technology type value before function is called. The current values of the parameters will be returned in the profile_params structure. Note that each of the 'profile_params' structure values are optional. To indicate that a particular structure field is valid in the output parameters, the corresponding bit will be set in the 'param_mask' field of the structure. For example if the 'secondary_dns_pref_addr' field has been filled in and is valid, the QMI_WDS_PROFILE_PARAM_SEC_DNS bit will be set in the 'param_mask' @return QMI_INTERNAL_ERR if an error occurred, QMI_NO_ERR if not. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - Creates a new profile on the modem processor. */ /*=========================================================================*/ EXTERN int qmi_wds_get_default_settings ( int user_handle, qmi_wds_profile_tech_type profile_tech, qmi_wds_profile_params_type *profile_params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_pkt_srvc_status ===========================================================================*/ /*! @brief Takes as input a user client handle and returns the packet service status of the associated connection. @return Value < 0 if error occurred, QMI_NO_ERR (0) if not. If QMI_NO_ERR is returned, the returned packet service status will be valid, otherwise it won't be. If QMI_SERVICE_ERR error code is returned, the qmi_err_code return parameter will be valid, otherwise it won't @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_pkt_srvc_status ( int user_handle, qmi_wds_link_status_type *pkt_srvc_status, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_dun_call_info ===========================================================================*/ /*! @brief Gets DUN call state and also sets items for reporting in DUN indications. @return QMI_NO_ERR (0) if no error occurred, one of the other QMI_*_ERR codes (< 0) if an error occurred. If return is QMI_SERVICE_ERR, the the qmi_err_code is valid and contains one of the QMI_SERVICE_ERR_* error codes. cmd_info is an input paramter which indicates which current call info to retrieve as well as which fields to report in the DUN indication message rsp_info is an output parameter which contains the current call info requested in the command. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_dun_call_info ( int user_handle, qmi_wds_dun_call_info_cmd_type *cmd_info, qmi_wds_dun_call_info_rsp_type *rsp_info, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_default_profile_number ===========================================================================*/ /*! @brief This messages retrieves the default profile number configured on the wireless device for the specified technology @return QMI_NO_ERR (0) if no error occurred, one of the other QMI_*_ERR codes (< 0) if an error occurred. If return is QMI_SERVICE_ERR, the the qmi_err_code is valid and contains one of the QMI_SERVICE_ERR_* error codes. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_default_profile_number ( int user_handle, qmi_wds_profile_tech_type profile_tech, qmi_wds_profile_family profile_family, unsigned char *default_profile_number, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_default_profile_number ===========================================================================*/ /*! @brief This messages sets the default profile number on the wireless device for the specifed technology @return QMI_NO_ERR (0) if no error occurred, one of the other QMI_*_ERR codes (< 0) if an error occurred. If return is QMI_SERVICE_ERR, the the qmi_err_code is valid and contains one of the QMI_SERVICE_ERR_* error codes. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_set_default_profile_number ( int user_handle, qmi_wds_profile_tech_type profile_tech, qmi_wds_profile_family profile_family, unsigned char profile_index, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_reset_profile_to_default ===========================================================================*/ /*! @brief This messages resets all the parameters of the given profile and technology to default values. @return QMI_NO_ERR (0) if no error occurred, one of the other QMI_*_ERR codes (< 0) if an error occurred. If return is QMI_SERVICE_ERR, the the qmi_err_code is valid and contains one of the QMI_SERVICE_ERR_* error codes. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_reset_profile_to_default ( int user_handle, qmi_wds_profile_tech_type profile_tech, unsigned char profile_index, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_reset_profile_param_invalid ===========================================================================*/ /*! @brief This messages resets the given profile param type to invalid for the given technology @return QMI_NO_ERR (0) if no error occurred, one of the other QMI_*_ERR codes (< 0) if an error occurred. If return is QMI_SERVICE_ERR, the the qmi_err_code is valid and contains one of the QMI_SERVICE_ERR_* error codes. TODO: Add information about Extended error codes. If return is QMI_EXTENDED_ERR, then qmi_err_code does not contain QMI_SERVICE_ERR_* error codes, but contains subsystem(module which modem QMI talks to, ex: ds_profile) specific error codes. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_reset_profile_param_invalid ( int user_handle, qmi_wds_profile_tech_type profile_tech, unsigned char profile_index, qmi_wds_reset_profile_param_type profile_param_id, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_client_ip_pref ===========================================================================*/ /*! @brief This message sends the prefered client IP family preference to the modem to support dual-IP over single RmNet. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_set_client_ip_pref ( int user_handle, qmi_ip_family_pref_type ip_family, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_mip_mode ===========================================================================*/ /*! @brief This command sets the current Mobile IP setting for the device. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_set_mip_mode ( int user_handle, qmi_wds_mobile_ip_mode_type mip_mode, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_mip_mode ===========================================================================*/ /*! @brief This command gets the current Mobile IP setting for the device. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_mip_mode ( int user_handle, qmi_wds_mobile_ip_mode_type *mip_mode_resp, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_active_mip_profile ===========================================================================*/ /*! @brief This command queries the current mobile IP profile index for the device. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_active_mip_profile ( int user_handle, unsigned char *mip_profile_index, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_active_mip_profile ===========================================================================*/ /*! @brief This command sets the current mobile IP profile index for the device. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_set_active_mip_profile ( int user_handle, srvc_programming_code_type service_code, unsigned char profile_index, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_read_mip_profile ===========================================================================*/ /*! @brief This command queries a mobile IP profile from the modem. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_read_mip_profile ( int user_handle, unsigned char profile_id, qmi_wds_read_mobile_ip_profile_resp_type *profile_resp, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_modify_mip_profile ===========================================================================*/ /*! @brief This command modifies a mobile IP profile on the device. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_modify_mip_profile ( int user_handle, srvc_programming_code_type service_code, unsigned char profile_index, qmi_wds_modify_mobile_ip_profile_req_type *modify_profile_req, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_pref_data_system ===========================================================================*/ /*! @brief This message queries the current preferred data system. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_pref_data_system ( int user_handle, qmi_wds_pref_data_sys_type *cur_pref_sys, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_current_data_system_status ===========================================================================*/ /*! @brief This message queries the current data system status. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @param user_handle [in] - QMI user handle pref_network [out] - Preferred network network_info [in] - Pointer to an array for storing the network info data network_info_len[inout] - Size of network_info array qmi_err_code [out] - QMI error code when return value < 0 @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - It is assumed that sufficient memory is allocated by the client for the network_info buffer. The number of entries actually stored is returned via network_info_len - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ EXTERN int qmi_wds_get_current_data_system_status ( int user_handle, qmi_wds_data_network_type *pref_network, qmi_wds_data_sys_status_network_info_type *network_info, unsigned int *network_info_len, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_reset_pkt_statistics ===========================================================================*/ /*! @brief This message is used to reset packet data statistics of the interface associated with the user_handle. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_reset_pkt_statistics ( int user_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_lte_max_attach_pdn_num ===========================================================================*/ /*! @brief This message is used to query the maximum number of attached PDNs supported @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_lte_max_attach_pdn_num ( int user_handle, int *max_attach_pdn, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_lte_attach_pdn_list ===========================================================================*/ /*! @brief This message is used to set the LTE attach PDN list @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_set_lte_attach_pdn_list ( int user_handle, qmi_wds_lte_attach_pdn_list_type *attach_pdn_list, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_lte_attach_pdn_list ===========================================================================*/ /*! @brief This message is used to query the LTE attach PDN list @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_lte_attach_pdn_list ( int user_handle, qmi_wds_lte_attach_pdn_list_type *attach_pdn_list, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_lte_attach_params ===========================================================================*/ /*! @brief This message is used to query the LTE attach Params @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_lte_attach_params ( int user_handle, qmi_wds_lte_attach_params *attach_params, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_lte_data_retry ===========================================================================*/ /*! @brief This message is used to enable or disable retry on LTE data attach @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_set_lte_data_retry ( int user_handle, int lte_data_retry, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_lte_data_retry ===========================================================================*/ /*! @brief This message is used to retrieve the current LTE data retry setting @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_lte_data_retry ( int user_handle, int *lte_data_retry, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_lte_attach_type ===========================================================================*/ /*! @brief This message is used to set whether the attach to be performed is initial or handoff @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_set_lte_attach_type ( int user_handle, qmi_wds_lte_attach_type lte_attach_type, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_lte_attach_type ===========================================================================*/ /*! @brief This message is used to retrieve the current LTE attach type @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_lte_attach_type ( int user_handle, qmi_wds_lte_attach_type *lte_attach_type, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_rev_ip_transport_conn_ind_registration ===========================================================================*/ /*! @brief This message is used to register for indications on the reverse adapter connection. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_rev_ip_transport_conn_ind_registration ( int user_handle, qmi_wds_rev_ip_transport_reg_status_type reg_status, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_ipsec_static_sa_config ===========================================================================*/ /*! @brief This message is used to retrieve IPSec Security Associations for the ePDG call. @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_ipsec_static_sa_config ( int user_handle, qmi_wds_ipsec_sa_config_type *sa_config, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_rev_ip_transport_config_complete ===========================================================================*/ /*! @brief This message is used to convey that the reverse adapter configuration is complete on the AP side @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_rev_ip_transport_config_complete ( int user_handle, qmi_wds_txn_id_type txn_id, qmi_wds_rev_ip_transport_config_result_type result, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_initiate_esp_rekey ===========================================================================*/ /*! @brief This message is used to initiate an ESP rekey for the iWLAN call corresponding to the given WDS handle @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_initiate_esp_rekey ( int user_handle, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_set_data_path ===========================================================================*/ /*! @brief This message is used to set the client data path preference @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_set_data_path ( int user_handle, qmi_wds_data_path_type data_path, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_get_data_path ===========================================================================*/ /*! @brief This message is used to query the current modem data path @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_get_data_path ( int user_handle, qmi_wds_get_data_path_type *data_path, int *qmi_err_code ); /*=========================================================================== FUNCTION qmi_wds_remove_delegated_ipv6_prefix ===========================================================================*/ /*! @brief This message is used to remove IPv6 prefix from the interface @return QMI_NO_ERR if operation was sucessful, < 0 if not. If return code is QMI_SERVICE_ERR, then the qmi_err_code will be valid and will indicate which QMI error occurred. @note - This function executes synchronously, there is not currently an asynchronous option for this functionality. - Dependencies - None. - Side Effects - None. */ /*=========================================================================*/ int qmi_wds_remove_delegated_ipv6_prefix ( int user_handle, qmi_wds_delegated_ipv6_prefix_type *params, int *qmi_err_code ); #ifdef __cplusplus } #endif #endif /* QMI_WDS_SRVC_H */